MRCARTOOL S310 Home Electric Car Charger Instruction Manual

1. Introducció

The MRCARTOOL S310 is a single-phase 32A, 7KW EV charging station designed for home use. It features a Type 2 plug (IEC61851-1 standard) and is compatible with a wide range of electric vehicles. This manual provides essential information for the safe installation, operation, and maintenance of your charging station.

MRCARTOOL S310 EV Charger with a 2-year warranty badge.

2. Informació de seguretat

Please read and understand all safety instructions before installing and operating the charging station. Failure to follow these instructions may result in electric shock, fire, or serious injury.

2.1 Proteccions de seguretat

• Més de voltage protecció
• Sota el voltage protecció
• Protecció de sobrecàrrega
• Protecció contra curtcircuits
• Protecció contra fuites a terra
• Protecció de presa de terra
• Protecció de sobretemperatura
• Protecció de baixa temperatura
• Protecció contra llamps

2.2 Precaucions generals de seguretat

• Ensure the power cable is connected correctly: IN-L (fire), IN-N (zero), PE (ground). The fire wire and zero wire must not be reversed.
• The PE (ground wire) must be reliably grounded.
• Before charging, ensure the tip of the EV charger is free from stains and water.
• Està prohibit col·locar la pila de càrrega dins del cotxe durant la càrrega.
• Always activate the emergency stop switch after powering on the device.

Diagram illustrating the comprehensive safety protections integrated into the MRCARTOOL S310 EV Charger.

3. Contingut del paquet

Verifiqueu que tots els elements que s'enumeren a continuació s'inclouen al vostre paquet:

• Main Unit (Charging Station)
• 220V Charger (Charging Cable with Type 2 Plug)
• Screws and Plastic Tubes for installation
• Manual d'usuari
• Hook for cable management
• Wall-mounted Backboard

Contents of the MRCARTOOL S310 EV Charger package.

4. Especificacions

Detailed dimensions and technical specifications of the charging station.

5. Configuració i instal·lació

The MRCARTOOL S310 EV Charger is designed for wall-mount or column installation. Follow these steps carefully:

5.1 Passos d'instal·lació

1. Posicionament i perforació: Position the wall-mounted backboard on the desired surface. Mark the locations for four holes according to the backboard's size. Drill four φ6*35mm holes and insert the expansion tubes.
2. Fixing the Backboard: Secure the wall-mounted backboard to the wall using four M4*32 self-tapping screws into the expansion tubes.
3. Muntatge de la unitat principal: Open the upper cover of the charging pile. Hang the main unit onto the installed wall-mounted backboard. Lock the screws from the bottom of the pile to secure it.
4. Cablejat: Pass the 3*6mm power cable through the corresponding waterproof head. Connect it to the appropriate input terminals (IN-L for fire, IN-N for zero, PE for ground). Ensure correct polarity and reliable grounding.
5. Assemblea final: Bloqueu els cargols del panell de coberta superior.

5.2 Key Features for Installation and Use

• Backboard Design: Provides support and secures the equipment to the wall.
• Botó de restabliment: In case of emergency, press this button to shut down the equipment.
• Special Socket: Effectively protects the EV charger interface from dust entry when not in use.
• Ganxo: Conveniently designed for hanging the charging cable, keeping it tidy and safe.

Key features for installation and daily use, including the backboard, reset button, special socket, and cable hook.

6. Instruccions de funcionament

The MRCARTOOL S310 EV Charger offers a smart and efficient way to charge your electric vehicle.

6.1 Procés de càrrega

1. Open Car Charging Port: Access your vehicle's charging port.
2. Connect Charging Gun: Connect the charging gun from the MRCARTOOL S310 to your car's charging port.
3. Activate Charging: Swipe the provided RFID card over the designated area on the charging station to turn on the power and initiate charging. The charger will automatically adjust the charging current according to your vehicle type.
4. Càrrega del monitor: The LED indicator lights will show the charging status. Your car's display will also show charging progress and estimated time remaining.
5. Atura la càrrega: To stop charging, swipe the RFID card again over the designated area to turn off the power.
6. Desconnecta i emmagatzema: Disconnect the charging gun from your car and return it to the hook on the charging station.

6.2 Smart Swipe Charging

The charging station is designed with a swipe card control switch, which is convenient and effective in preventing unauthorized charging. It will stop automatically when your vehicle is fully charged.

Smart swipe charging feature for secure and convenient operation.

6.3 Capacitat de càrrega ràpida

The MRCARTOOL S310 provides fast charging, capable of fully charging a car in approximately 7 hours on average. It can deliver enough charge for about 45km of range per hour of charging.

Fast charging specifications for the MRCARTOOL S310.

6.4 Guia de vídeo operativa

Official video demonstrating the charging process with the MRCARTOOL S310 EV Charger.

7. Manteniment

To ensure the longevity and optimal performance of your MRCARTOOL S310 EV Charger, follow these simple maintenance guidelines:

• Neteja regular: Keep the charging station and cable clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Inspect Cable and Plug: Periodically inspect the charging cable and plug for any signs of wear, damage, or corrosion. Do not use if damaged.
• Protecció del medi ambient: The unit is IP65 rated for indoor/outdoor use and is waterproof. However, avoid prolonged exposure to extreme weather conditions if possible.

The charger's waterproof design ensures normal operation even in rainy conditions.

8. Solució De Problemes

The MRCARTOOL S310 EV Charger features an LED indicator light system to communicate its status and any potential issues. Refer to the table below for troubleshooting common problems:

LED indicator guide for understanding the charging station's status and error codes.

9. Consells d'usuari

• Comprovar la compatibilitat: Ensure you select the correct charger type (EU 220V or US 110V) based on your region and car model before purchase. The charger is compatible with all EV brands.
• Col·locació òptima: The 28ft (8.5m) cable length is suitable for various parking lots and garages, making it ideal for home use. Plan your installation location to ensure easy access to your vehicle's charging port.
• Instal·lació segura: Proper installation of the wall-mounted backboard is crucial for the stability and safety of the charging station.

Comparison of EU and US standard chargers, highlighting voltage and frequency differences.

The MRCARTOOL S310 is suitable for all EV car models.

The charger is compatible with a wide range of EV brands including Tesla, Volvo, Skoda, Nissan, Mercedes-Benz, BMW, Ford, Porsche, Fiat, Chevrolet, Audi, Kia, Mini, and more.

The 28ft (8.5m) cable length is ideal for home garages and parking areas.

10. Garantia i Suport

The MRCARTOOL S310 Home Electric Car Charger comes with a 2 any de garantia. For any technical assistance, troubleshooting beyond this manual, or warranty claims, please contact MRCARTOOL customer support through your purchase platform or the official MRCARTOOL weblloc.