YNG808 433.92MHz Garage Door Opener / Gate Remote Control User Manual

Introducció

This manual provides comprehensive instructions for the YNG808 433.92MHz Rolling Code Remote Control. Designed for use with compatible garage door openers and gate systems, this remote offers a convenient way to control your access points. Please read these instructions carefully before use to ensure proper setup and operation.

Notes importants

• This remote control cannot be cloned directly. Access to your receiver/opener is required for programming. Please ensure you have physical access to your receiver/opener before attempting to program the remote.
• Compatibility is crucial. This remote is designed for specific brands and frequencies. Your existing remote control's brand and frequency must match the specifications described (433.92MHz, Rolling Code, compatible with NICE INTI2, FLORS, FLO2RS, FLO4RS, ERA, FLO2RE, FLO4RE, ON2E, ON4E, FLORE). It is not compatible with other brands or frequencies.

Especificacions del producte

Contingut del paquet

• YNG808 Remote Control
• Bateria (preinstal·lada)
• English Manual (this document)
• Clauer

Configuració i Programació

The YNG808 remote control is programmed directly with your garage door opener or gate receiver. Follow these steps carefully:

Programació del comandament a distància:

The programming process involves interacting with the learning button on your receiver unit. The diagram in the original manual (not embeddable here) illustrates an 'OX2 receiver' with an LED and a button. It shows two memorization outputs, 'Out1' and 'Out2', which correspond to different buttons on the remote.

1. Inicia el mode d'aprenentatge: Briefly press and hold the learning button on your radio receiver or door opener. The LED indicator on the operator will turn on, indicating it's in learning mode.
2. Pair Remote Button: Press the desired button on your YNG808 remote control. The LED on the receiver will flash and then remain lit continuously, until the receiver's LED turns off.
3. Confirmació: The remote is now successfully coded to the operator.

Deleting Existing Codes:

To clear all previously programmed remote controls from your receiver:

1. Activate Delete Mode: Continuously press and hold the learning button on the receiver. The LED on the receiver will turn on.
2. Release at Third Flash: Continue holding until the receiver's LED flashes for the third time. Release the button immediately after the third flash. All stored codes will be deleted.

Nota: This action will delete ALL programmed remotes from the receiver. You will need to reprogram any other remotes you wish to use.

Instruccions de funcionament

Once programmed, operating the YNG808 remote control is straightforward:

• Per obrir/tancar: Press the programmed button on the remote control. The garage door or gate will activate.
• Interval: The remote has a working range of approximately 30-50 meters (98-164 feet). Optimal performance may vary based on environmental factors and obstructions.

Manteniment

Substitució de la bateria:

The YNG808 remote control comes with a pre-installed battery. If the remote's range decreases significantly or the LED indicator on the remote does not light up when a button is pressed, the battery may need replacement. Refer to the internal structure image for guidance on opening the remote to access the battery compartment.

Resolució de problemes

• El comandament a distància no s'emparella:
  • Ensure you have physical access to your receiver/opener. The YNG808 cannot be cloned and requires direct programming with the receiver.
  • Verify that your receiver/opener is in learning mode (LED on).
  • Check the compatibility: Confirm that your existing system operates on 433.92MHz and uses a rolling code, and is one of the compatible brands (NICE INTI2, FLORS, etc.). Incompatible brands or frequencies will prevent pairing.
  • Assegureu-vos que la bateria del comandament a distància no s'hagi esgotat.
• Remote has short range or intermittent operation:
  • Substituïu la bateria del comandament a distància.
  • Check for obstructions between the remote and the receiver. Large metal objects or walls can reduce range.
  • Ensure the receiver antenna is not damaged or obstructed.
• No way to reset/synchronize:
  • The remote itself does not have a user-accessible reset button. Resetting or deleting codes is performed on the receiver unit as described in the "Deleting Existing Codes" section.

Consells per a l'usuari

• Verifiqueu primer la compatibilitat: Abans de la compraasing, always double-check that your existing garage door opener or gate system is compatible with the YNG808's frequency (433.92MHz) and rolling code type. Many users encounter issues due to incompatibility.
• Access to Receiver is Key: Remember that programming requires direct interaction with your receiver/opener. If you do not have access to the learning button on your main unit, this remote will not work for you.
• Keep a Spare: If your original remote is lost, this product is an excellent replacement. Consider programming a spare remote for convenience.

Garantia i Suport

This product comes with a 1-year warranty from the store. If you encounter any quality problems within 7 days of receipt, you may be eligible for a return. For any questions or support, please contact the seller. All inquiries are typically answered within 24 hours.

Per a informació addicional o per view the original PDF manual, please refer to the following link: YNG808 User Manual (PDF)

Vídeo del producte

Mireu el vídeo oficial del producte per a més informacióview of the Yinuogo Garage Remote Control.