Oregon Scientific RM313PNA Projection Atomic Alarm Clock

Introducció

The Oregon Scientific RM313PNA is an advanced projection atomic alarm clock designed for accurate timekeeping and convenience. It automatically synchronizes with the U.S. Atomic Clock, ensuring precise time without manual adjustments for Daylight Saving Time. Key features include an indoor thermometer, a projection function to display time on a wall or ceiling, a HiGlo electro-luminescent backlight, and a crescendo alarm with snooze.

Image: The Oregon Scientific RM313PNA Projection Atomic Alarm Clock, featuring a blue translucent casing. The digital display shows the current time and indoor temperature. The projection lens is visible on the front.

Característiques clau

• Sincronització del temps atòmic: Automatically sets time to the U.S. Atomic Clock and adjusts for Daylight Saving Time.
• Projecció temporal: Projects the current time onto a wall or ceiling in a soft red light.
• Indoor Thermometer: Displays the current indoor temperature.
• HiGlo Backlight: Electro-luminescent backlight for clear visibility of the LCD display in low light.
• Alarma crescendo: Alarm sound gradually increases in volume.
• Funció de posposar: Provides a temporary pause for the alarm.
• Multi-language Day Display: Day of the week can be displayed in English, Spanish, or French.

Configuració

1. Engegar el rellotge

The RM313PNA can be powered by an AC adapter for continuous operation and projection, or by batteries for portable use and temporary projection.

• Adaptador de CA: Connect the included AC adapter to the clock and then to a standard wall outlet. This enables continuous projection and backlight.
• Bateries: Insert two (2) AA batteries (not included) into the battery compartment, observing the correct polarity (+/-). Batteries provide backup power and allow for temporary projection and backlight activation via the snooze bar.

2. Initial Atomic Time Synchronization

Upon initial power-up, the clock will automatically attempt to synchronize with the U.S. Atomic Clock signal. This process may take several minutes to a few hours, depending on your location and signal strength.

• Col·loca el rellotge a prop d'una finestra per a una recepció òptima del senyal.
• Avoid placing it near electronic devices that may cause interference.
• A signal icon on the display will indicate successful synchronization.

3. Setting Time Zone and Language

After synchronization, you may need to set your specific North American time zone and preferred language for the day display. Refer to the "Operating Instructions" section for detailed steps on adjusting these settings.

Instruccions de funcionament

1. Mostra informació

The LCD screen displays the current time, date, day of the week, and indoor temperature.

• Hora: Shown in 12-hour or 24-hour format.
• Data/Dia: Automatically updated. Day can be displayed in English, Spanish, or French.
• Temperatura: Indoor temperature is displayed in Celsius or Fahrenheit.

2. Using the Projection Feature

• Continuous Projection (AC Power): If the clock is powered by the AC adapter, you can enable continuous time projection onto a wall or ceiling. Locate the projection control switch (often on the back or side) and set it to the "ON" position.
• Temporary Projection (Battery Power or AC Power): Press the Snooze/Light bar on top of the clock. The time will project for approximately five seconds.
• Ajust de l'angle de projecció: The projection lens can typically be rotated to adjust the angle of the projected time.
• Focus: Some models may have a focus wheel near the projection lens to sharpen the projected image.

3. Configuració i ús de l'alarma

• Configuració de l'hora de l'alarma: Press the "ALARM SET" button (location may vary, typically on the back or side). Use the "+" and "-" buttons to adjust the hour and minute. Press "ALARM SET" again to confirm.
• Activació/desactivació de l'alarma: Use the "ALARM ON/OFF" switch or button to enable or disable the alarm. An alarm icon will appear on the display when active.
• Alarma crescendo: The alarm sound starts softly and gradually increases in volume to gently wake you.
• Funció de posposar: When the alarm sounds, press the large Snooze/Light bar on top of the clock to temporarily silence the alarm for a set period (e.g., 8 minutes). The alarm will sound again after the snooze period.
• Aturar l'alarma: To stop the alarm completely, press any button other than the Snooze/Light bar, or toggle the "ALARM ON/OFF" switch.

4. HiGlo Backlight

Press the Snooze/Light bar to activate the electro-luminescent backlight for the LCD display. The backlight will illuminate for approximately five seconds. If using AC power, continuous backlight may be an option depending on settings.

5. Manual Time/Date/Temperature Adjustment

In rare cases where atomic synchronization is not possible or for specific preferences, you can manually set the time, date, and switch between Celsius/Fahrenheit. Consult the full user manual for detailed instructions on manual adjustments, as button sequences can vary.

Manteniment

• Neteja: Netegeu el rellotge amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents, ja que poden danyar la casing o pantalla.
• Substitució de la bateria: If using batteries, replace them when the display becomes dim or the clock functions erratically. Always replace both batteries at the same time with new AA batteries.
• Emmagatzematge: Si guardeu el rellotge durant un període prolongat, traieu-ne les piles per evitar fuites.

Resolució de problemes

Especificacions

Garantia i Suport

This Oregon Scientific RM313PNA Projection Atomic Alarm Clock comes with a 90 dies de garantia from the date of purchase. The warranty covers manufacturing defects but does not cover misuse of the product.

For technical support, troubleshooting assistance, or warranty claims, please refer to the official Oregon Scientific weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Conserveu el comprovant de compra per validar la garantia.