Intermatic Digital 7-Day Programmable Wall Switch Timer SS7C User Manual

Introducció

The Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer is designed to control lighting and heavy-duty loads such as fans and appliances. This timer offers precise control with up to six ON/OFF settings per day, totaling 42 settings per week. It features a digital clock, battery backup, and various programming options to suit your schedule.

Informació de seguretat

ADVERTIMENT: Risk of electric shock. Installation requires working with high voltage wiring. Always turn off power at the circuit breaker or fuse box before installation or servicing. If you are unsure about any part of these instructions, consult a qualified electrician. Do not exceed the electrical ratings of the device.

• Assegureu-vos que l'alimentació estigui desconnectada abans de la instal·lació.
• Seguiu tots els codis elèctrics locals i nacionals.
• Aquest dispositiu només és per a ús interior.

Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

• Intermatic SS7C Digital Wall Switch Timer Unit
• Cargols de muntatge
• Filferro
• Manual d'instruccions (aquest document)

Configuració i instal·lació

Eines necessàries: Screwdriver, Wire Strippers, Electrical Tape.

1. Apagueu l'alimentació: Locate the circuit breaker or fuse that controls the power to the switch you are replacing. Turn it OFF. Verify power is off using a voltage provador.
2. Elimina l'interruptor existent: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch. Note the wiring configuration (e.g., line, load, ground).
3. Wire the SS7C Timer: Connect the wires from the wall box to the SS7C timer using the provided wire nuts. Refer to the wiring diagram below for typical connections. Ensure all connections are secure.
   

   Imatge: Frontal view of the Intermatic SS7C Digital Wall Switch Timer. This image shows the digital display and control buttons, which are essential for programming and operation.

   • Cable de línia: Connect to the timer's LINE terminal.
   • Cable de càrrega: Connect to the timer's LOAD terminal.
   • Cable de terra: Connect to the timer's GROUND terminal.
   • Cable neutre (si escau): Some installations may require a neutral wire. Consult your local electrical codes.
4. Muntar el temporitzador: Gently push the wired timer into the wall box. Secure it with the mounting screws. Attach the wall plate.
5. Restaura l'alimentació: Turn the power back ON at the circuit breaker or fuse box. The timer display should illuminate.

Funcionament i programació

The SS7C timer allows for flexible programming with up to 6 ON/OFF settings per day.

1. Configuració de l'hora i el dia actuals

1. Premeu el botó RELOJ botó. La pantalla de temps parpellejarà.
2. Utilitza el HORA i MINUT botons per ajustar l'hora actual.
3. Premeu el botó DIA botó per configurar el dia actual de la setmana.
4. Premeu RELOJ again to save and exit, or wait a few seconds for it to save automatically.

2. Programació d'esdeveniments d'activació/desactivació

The timer supports up to 6 ON/OFF programs per day, for a total of 42 per week.

1. Premeu el botó PROG botó. La pantalla mostrarà "1 ON".
2. Ús HORA, MINUT, i DIA buttons to set the desired ON time and day(s) for Program 1. You can select specific days (e.g., M, Tu, W, Th, F, Sa, Su), weekdays (M-F), weekends (Sa-Su), or all 7 days.
3. Premeu PROG de nou. La pantalla mostrarà "1 OFF".
4. Set the desired OFF time and day(s) for Program 1 using the HORA, MINUT, i DIA botons.
5. Repeat steps 1-4 for additional programs (2 ON/OFF through 6 ON/OFF).
6. After setting all desired programs, press RELOJ per tornar al funcionament normal.

3. Anul·lació manual

To manually turn the connected device ON or OFF outside of programmed times, press the ON/OFF button. This will temporarily override the current program until the next scheduled ON or OFF event.

4. Random Setting Feature

The random setting feature can be activated to vary ON/OFF times slightly, creating a lived-in appearance when you are away. Consult the full manual for specific activation steps for the random feature.

Manteniment

The Intermatic SS7C timer is designed for low maintenance. The internal battery backup maintains programming for up to three years, even during power failures.

• Substitució de la bateria: If the display becomes dim or programming is lost frequently during power outages, the internal battery may need replacement. This typically requires professional servicing or careful adherence to specific instructions not detailed here.
• Neteja: Clean the timer's surface with a soft, damp tela. No utilitzeu netejadors abrasius ni dissolvents.

Resolució de problemes

Especificacions

• Marca: Intermatic
• Número de model: SS7C
• Pes de l'article: 0.35 lliures
• Nombre de configuracions: 7-day programmable, up to 6 ON/OFF settings per day (42 per week)
• Mida de la pantalla: 1.5 polzades
• Color: Blanc
• Fabricant: INTERMATIC INC
• UPC: 078275056732
• ASIN: B0000BYDA2

Garantia i Suport

This Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer comes with a Garantia limitada del fabricant d'1 any des de la data de compra. Aquesta garantia cobreix els defectes de materials i de mà d'obra en ús normal.

For warranty claims, technical assistance, or further support, please contact Intermatic customer service. Keep your proof of purchase for warranty validation.

For the most up-to-date support information, please visit the official Intermatic weblloc web o consulteu les dades de contacte que s'inclouen a l'embalatge del producte.