1. Introducció
The MXR Distortion+ is a classic guitar effects pedal known for its distinctive distortion sounds. This compact unit is designed to deliver a range of tones from subtle overdrive to classic hard rock distortion. Its germanium-powered, soft-clipped distortion circuit has been a staple on countless recordings, offering a unique sonic character.
Característiques principals:
- Germanium-powered, soft-clipped distortion
- Classic 70s distortion
- Classic early ’80s hard rock tone
- Disseny compacte i durador
2. Configuració
Before connecting your MXR Distortion+ pedal, ensure your amplifier is turned off. This prevents any potential damage to your equipment.
Connexions:
- Connecteu la vostra guitarra al ENTRADA jack al costat dret del pedal mitjançant un cable d'instrument estàndard de 1/4 de polzada.
- Connecteu el SORTIDA presa al costat esquerre del pedal al vostre ampl'entrada del lificador utilitzant un altre cable d'instrument de 1/4 de polzada.
Encendre el pedal:
The MXR Distortion+ can be powered by a 9V battery or an optional 9V DC power adapter (center negative).
- Instal·lació de la bateria: To install a 9V battery, remove the bottom plate of the pedal by unscrewing the four screws. Connect the battery to the clip and place it inside the enclosure before reattaching the bottom plate.
- Adaptador d'alimentació: Connect a 9V DC power adapter (not included) to the power jack on the side of the pedal.
Imatge: Lateral view of the MXR Distortion+ pedal, highlighting the input, output, and 9V power jacks.
Imatge: Part inferior view of the MXR Distortion+ pedal, showing the four screws that secure the battery compartment.
3. Controls
The MXR Distortion+ features two primary control knobs and a footswitch for activation.
Imatge: Superior view of the MXR Distortion+ pedal, clearly showing the 'Output' and 'Distortion' control knobs.
- SORTIDA: This knob controls the overall output volume of the effect. Turn clockwise to increase volume, counter-clockwise to decrease.
- DISTORSIÓ: This knob adjusts the amount of distortion applied to your signal. Turn clockwise for more distortion, counter-clockwise for less.
- INTERRUPTOR DE PEUT: Toggles the effect on/off. The LED illuminates when the effect is active.
4. Funcionament
The MXR Distortion+ is straightforward to operate, allowing you to quickly dial in a variety of distorted tones.
- Classic Blues Tones: Set the DISTORTION control low (e.g., 9 o'clock to 12 o'clock) and adjust the OUTPUT knob to drive the front end of your amplifier. This will produce a warm, overdriven blues tone.
- Early '80s Hard Rock: Max out the DISTORTION knob (e.g., 3 o'clock to full clockwise) for a powerful, saturated hard rock tone. Adjust OUTPUT to match your desired volume.
- Subtle Boost/Overdrive: For a cleaner boost with a touch of grit, set DISTORTION very low and OUTPUT to unity gain or slightly above.
Demonstration Videos (for related MXR pedals):
Video: MXR Custom Badass Modified Overdrive, 78 Distortion M77, M78. This video demonstrates the sound of related MXR distortion and overdrive pedals.
Video: MXR Sugar Drive Pedal M294. This video demonstrates the sound of a related MXR overdrive pedal.
5. Especificacions
| Número de model | M104 |
| Pes de l'article | 1 lliures |
| Dimensions del producte | 5.5 cm de llargada x 2.5 cm d'amplada x 4.5 cm d'alçada |
| Material del cos | Germanium, Plastic |
| Color | groc |
| Font d'alimentació | Alimentat per piles (cal 1 pila de 9 V) |
| Voltage | 9.0 V |
| Format del senyal | Analògic |
| Tipus de connector | Àudio de 1/4 de polzada |
6. Manteniment
- Neteja: Feu servir un drap suau i sec per netejar el pedal. Eviteu productes de neteja o dissolvents abrasius.
- Emmagatzematge: Guardeu el pedal en un lloc sec, allunyat de temperatures extremes i de la llum solar directa.
- Durada de la bateria: If using a battery, disconnect the input cable when not in use to conserve battery life. Remove the battery if the pedal will not be used for an extended period.
7. Solució De Problemes
- Sense so:
- Comproveu totes les connexions dels cables (guitarra a l'entrada, sortida a amp).
- Ensure the pedal is receiving power (check battery or power adapter).
- Verifica la teva guitarra i ampels lificadors funcionen correctament.
- Weak or Distorted Sound (unexpectedly):
- Replace the 9V battery if it's low.
- Ensure the power adapter meets the 9V DC (center negative) specification.
- Adjust the OUTPUT and DISTORTION knobs to find your desired tone.
8. Garantia i assistència
This product is covered by the manufacturer's warranty. For detailed warranty information or technical support, please refer to the official MXR weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el comprovant de compra per a reclamacions de garantia.
