Viper 479V Responder Remote Instruction Manual

1. Producte acabatview

The Viper 479V Responder Remote is designed as an additional or replacement remote for compatible Viper security and remote start systems. It features up to 1/2 mile range and a premium SST LCD display for clear communication with your vehicle's system.

Image: Viper 479V Responder Remote. This image displays the front of the remote, highlighting its LCD screen and four control buttons.

Característiques principals:

• Comunicació bidireccional: Provides visual and audible confirmation when commands are sent successfully.
• Interval estès: Operates with up to 1/2 mile range.
• Pantalla LCD: Premium SST LCD display for clear vehicle monitoring with priority icons.
• Four-Button Control: Allows for remote locking, unlocking, and starting of your vehicle.

2. Compatibilitat del sistema

This Viper 479V Responder Remote is compatible with the following Viper security and remote start systems:

• Viper 591XV
• Viper 690XV
• Viper 790XV
• Viper 791XV
• Viper 542V
• Viper 434V
• Viper 554V
• Viper 564V

Please verify your existing system's model number to ensure compatibility before programming.

3. Setup: Programming the Remote

To program your new Viper 479V Responder Remote to your vehicle's security system, follow these steps carefully. The programming process requires locating your vehicle's Valet/Programming button, which is typically installed in the vehicle itself, not on the remote.

1. Locate Valet/Programming Button: Identify the Valet/Programming button in your vehicle. Its location can vary, but it is often found under the dashboard, near the fuse box, or in the glove compartment.
2. Preparar el vehicle:
   • Open the driver's side door.
   • Introduïu la clau a l'encesa.
   • Turn the key to the "ON" position. Do not start the engine; the dash lights should illuminate.
3. Introduïu el mode de programació:
   • For systems with remote start: Within 5 seconds of turning the key to "ON", press the Valet/Programming button once, then press and aguantar it. The car's siren will chirp once, indicating entry into programming mode.
   • For systems without remote start: Press the Valet/Programming button twice, then press and aguantar it. The car's siren will chirp once.
4. Programa remot: While continuing to hold the Valet/Programming button, press the "UNLOCK" button on your new Viper 479V remote once. You will hear another chirp from the vehicle's siren, and the remote may beep, confirming successful programming.
5. Sortir del mode de programació: Release the Valet/Programming button. Turn the key to the "OFF" position and remove it from the ignition.
6. Prova a distància: Test all functions of your new remote (lock, unlock, remote start if applicable) to ensure proper operation. If the remote does not function as expected, carefully repeat the programming steps from the beginning.

If you encounter difficulties, consult your vehicle's specific alarm system manual or contact a professional installer.

4. Funcionament del comandament a distància

The Viper 479V Responder Remote provides intuitive control over your vehicle's security and remote start features through its four-button layout and LCD display.

Funcions bàsiques:

• Bloqueig: Press the lock button to arm your vehicle's security system and lock the doors.
• Desbloquejar: Press the unlock button to disarm your vehicle's security system and unlock the doors.
• Inici remot: Press the remote start button to remotely start your vehicle (if equipped and configured).
• Funcions auxiliars: Additional buttons may control auxiliary features depending on your system's installation.

The LCD display provides visual feedback on your vehicle's status, such as door lock status, alarm triggers, and remote start confirmation. Priority icons on the display offer a quick overview of important vehicle information.

5. Manteniment

Substitució de la bateria:

The Viper 479V remote requires dues piles AAA for operation. When the remote's display dims or its range decreases, it is time to replace the batteries.

1. Localitza la tapa del compartiment de les piles a la part posterior del comandament a distància.
2. Feu lliscar o desenganxeu la tapa amb cura per obrir el compartiment.
3. Traieu les piles AAA velles.
4. Introduïu dues piles AAA noves, assegurant-vos de la polaritat correcta (+/-).
5. Col·loqueu la coberta del compartiment de la bateria amb seguretat.

Cura i manipulació:

• Eviteu l'exposició a l'aigua: This remote is not waterproof. Exposure to water or high humidity can cause damage and lead to malfunction.
• Protegir de les gotes: While durable, repeated drops or impacts can damage the internal electronics or the LCD screen.
• Netegeu suaument: Use a soft, dry cloth to clean the remote. Avoid harsh chemicals or abrasive materials.
• Extrems de temperatura: Avoid exposing the remote to extreme temperatures, such as direct sunlight in a closed vehicle for extended periods.

6. Solució De Problemes

If you experience issues with your Viper 479V Responder Remote, consider the following troubleshooting steps:

• El comandament a distància no respon:
  • Comproveu i substituïu les piles AAA.
  • Ensure you are within the operating range of the vehicle.
  • Verify that the remote is properly programmed to your vehicle's system (refer to Section 3).
• Abast reduït:
  • Substituïu les piles.
  • Ensure there are no significant obstructions between the remote and the vehicle.
• Problemes de la pantalla LCD:
  • Si la pantalla està tènue o en blanc, canvieu les piles.
  • If the display is physically damaged, the remote may need replacement.
• Els botons no funcionen:
  • Assegureu-vos que el comandament a distància estigui net i lliure de brutícia al voltant dels botons.
  • If specific buttons consistently fail, the remote may be worn out and require replacement.
• Accidental Test Mode: Some remotes may have a small 'P' button on the back that can accidentally trigger a test mode. If this occurs, removing and reinserting the battery may reset the remote.

For persistent issues, it is recommended to consult a professional Viper installer or the product's support resources.

7. Especificacions

8. Informació de la garantia

The Viper 479V Responder Remote comes with a 1 any de garantia del fabricantAquesta garantia cobreix els defectes de materials i de fabricació en condicions d'ús normal. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.

For specific details regarding warranty coverage and claims, refer to the documentation provided with your original Viper security system or contact Viper customer support.

9. Suport

For further assistance, technical support, or inquiries not covered in this manual, please refer to the following resources:

• Viper Oficial Weblloc: Visit the official Viper weblloc web per a actualitzacions de productes, preguntes freqüents i documentació de suport addicional.
• Professional Installer: Contact the authorized Viper dealer or installer who installed your security system for expert assistance.
• Atenció al client: Refer to your product packaging or the Viper weblloc web per obtenir informació de contacte del servei d'atenció al client.