Permatex 81158 Black Silicone Adhesive Sealant Instruction Manual

1. Producte acabatview

The Permatex 81158 Black Silicone Adhesive Sealant is a versatile, general-purpose RTV (Room Temperature Vulcanizing) sealant designed for both indoor and outdoor applications. It effectively bonds, repairs, seals, mends, and secures various materials, providing a durable and flexible seal.

Característiques principals:

• Professional Formula: Sensor-safe, general-purpose black RTV sealant.
• Multiusos: Seals, bonds, repairs, mends, and secures glass, metal, plastics, fabric, vinyl, weather stripping, and vinyl tops.
• Resistent a la intempèrie: Waterproof and flexible; resists water, weather, vibration, oil, and grease.
• Interval de temperatura: Effective from -75°F to 450°F (-59°C to 232°C).
• Protecció elèctrica: Can be used to protect and repair electrical wiring.

This sealant is ideal for applications such as door frames, electrical connections, seams and roofs, vinyl tops, and weather stripping. It is not recommended for engine gasket applications.

2. Informació de seguretat

ADVERTIMENT: Direct contact with uncured sealant may irritate eyes and skin. Avoid contact with skin or eyes. Use with adequate ventilation. Read carefully all cautions on the back panel before use. This product may contain chemicals known to cause cancer.

Primers auxilis:

• Contacte amb els ulls: Flush with water for 15 minutes. Seek medical attention if irritation persists.
• Contacte amb la pell: Rentar bé amb aigua i sabó.
• Inhalació: Move to fresh air. If symptoms persist, seek medical attention.

Mantingui fora de l'abast dels NENS.

3. Configuració i preparació

1. Preparació de la superfície: Ensure all surfaces to be bonded or sealed are clean, dry, and free from oil, stains, and old adhesive layers. Use a scraper or appropriate cleaning agent if necessary.
2. Open the Tube: Unscrew the cap. The tube may have a sealed opening that needs to be punctured.
3. Prepare Nozzle: Cut the nozzle to achieve the desired bead size for your application. A smaller cut will produce a finer bead, while a larger cut will produce a thicker bead.

4. Operating (Application)

1. Aplicar segellador: Apply a continuous and even bead of sealant directly onto one of the joint surfaces. The coating thickness should be appropriate for the gap being filled.
2. Deixeu assecar: Let the applied sealant stand for 8-12 minutes to allow the surface to begin drying.
3. Muntar peces: While the sealant is still tacky, assemble the parts.
4. Fasten Connection: When tightening fasteners, apply uniform and appropriate force. Ensure the sealing surface is not moved during tightening to maintain an effective seal.

5. Curing and Maintenance

1. Temps de curació completa: Allow the adhesive layer to fully cure for 24 hours before using the vehicle or applying stress to the sealed joint.
2. Cleaning Excess Sealant: Excess uncured sealant can be wiped away with a cloth. Once cured, excess sealant can be trimmed with a sharp knife.
3. Manteniment de broquets: To reuse the applicator nozzle, clean any remaining sealant from the nozzle using hot water. Silicone becomes more liquidy with hot water, making it easier to wash out.

6. Especificacions

7. Garantia i Suport

For information regarding product warranty, technical support, or further assistance, please visit the official Permatex weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. També podeu consultar la Permatex Brand Store per obtenir informació i recursos addicionals sobre el producte.