Westek 6043BC Touch Pad Dimmer Instruction Manual

Introducció

The Westek 6043BC Touch Pad Dimmer is designed to convert any standard incandescent lamp into a touch-controlled dimmable lamp. This device allows you to easily adjust the light output with a simple touch, offering three levels of illumination. It is compatible with incandescent bulbs up to 200 Watts. This manual provides detailed instructions for safe installation, operation, and maintenance of your touch pad dimmer.

Característiques del producte

Touch Light Control: Simply touch the pad to turn the light on or change the illumination level.
Brillantor ajustable: Offers three distinct light settings, ranging from a low night light to full brightness.
Disseny convenient: Works with incandescent bulbs up to 200 Watts, eliminating the need for specialized 3-way bulbs.
Estil modern: Features a contemporary black finish and sleek design that complements various home decors.
Fàcil instal·lació: Designed for simple plug-in functionality to add dimmer capabilities to your existing table or floor lamps.

Informació de seguretat

Please read and understand all instructions before installation and use. Retain this manual for future reference.

Només per a ús interior.
No supereu la potència màximatage of 200 Watts for incandescent bulbs.
Assegureu-vos que lamp is unplugged from the wall outlet before installation.
Avoid using with LED or CFL bulbs unless specifically rated as dimmable and compatible with touch dimmers. Incompatible bulbs may flicker or be damaged.
Do not use this dimmer control with another dimmer in the same circuit.
Mantenir allunyat de l'aigua i la humitat.

Configuració i instal·lació

Follow these steps to install your Westek 6043BC Touch Pad Dimmer:

Prepareu el Lamp: Assegureu-vos que la vostra lamp is unplugged from the wall outlet. Replace the existing light bulb with a standard incandescent bulb (up to 200 Watts).
Connect the Dimmer: Connecteu la lamp's power cord into the receptacle on the Westek 6043BC dimmer unit.
Connecteu-vos a la presa de corrent: Plug the dimmer unit into a standard wall outlet.
Position the Touch Pad: Place the touch pad in a convenient location. The touch pad is designed to detect contact with any metallic conductive surface, which then controls the lamp. Ensure the touch pad wire is not pinched or damaged.

Back of Westek 6043BC packaging showing installation diagram

Figure 1: Installation diagram from product packaging. Shows how to connect the lamp to the dimmer and the dimmer to the wall outlet, along with the touch pad connection.

Westek 6043BC Touch Pad Dimmer main unit with plug

Figure 2: The main dimmer unit, which plugs into the wall and accepts the lampendoll.

Westek 6043BC Touch Pad Dimmer touch pad

Figure 3: The circular touch pad component, which is used to control the lamp.

Instruccions de funcionament

Once installed, operate the dimmer as follows:

Activa/Ajusta la brillantor: Lightly touch the metal touch pad. The lamp will cycle through three brightness levels: low, medium, and high.
Apagar: After the high brightness setting, touching the pad again will turn the lamp apagat.
Potència Outage: En cas d'una potènciatage, the dimmer may reset. Simply touch the pad to resume normal operation.

Manteniment

The Westek 6043BC Touch Pad Dimmer requires minimal maintenance. Ensure the unit and its connections are kept clean and dry. Do not attempt to open or repair the unit yourself, as this may void the warranty and pose a safety risk.

Resolució de problemes

Problema	Causa possible	Solució
Lamp no s'encén ni s'atenua.	Lamp no està connectat correctament al regulador d'intensitat. Dimmer not properly plugged into wall outlet. Lamp's internal switch is off. Incompatible bulb (LED/CFL). Bombeta defectuosa. Potència outage o l'interruptor automàtic s'ha saltat.	Assegureu-vos lamp cord is fully inserted into the dimmer. Ensure dimmer is fully inserted into a working wall outlet. Gireu la lamp's original switch to the ON position. Replace with a standard incandescent bulb (up to 200W). Substituïu la bombeta. Check your home's power supply and circuit breakers.
Lamp parpelleigs o brunzits.	Incompatible bulb (LED/CFL). Connexió de la bombeta fluixa.	Replace with a standard incandescent bulb (up to 200W). Premeu la bombeta al seu sòcol.
Lamp turns on by itself occasionally.	Electrical interference (e.g., during thunderstorms, power fluctuations).	This can be normal behavior during electrical disturbances. Simply touch the pad to turn it off.

Especificacions

Model: 6043 aC
Marca: Westek
Mode de funcionament: ON-NONE-OFF (3-level dimming)
Wat màxtage: 200 Watts (Incandescent bulbs only)
Voltage: 120 V, 60 Hz
Mètode de control: Toca
Dimensions de l'article (L x A x A): 3.9 x 1 x 7.9 polzades
Pes de l'article: 3.8 unces
Material: Multi (Brass contact material)
Color: Negre
Només per a ús interior: Sí

Garantia i Suport

The Westek 6043BC Touch Pad Dimmer comes with a limited warranty. For specific warranty details, please refer to the product packaging or contact Westek customer support. For technical assistance or further inquiries, please visit the official Westek weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.

Fabricant: AmerTac

Atenció al client: 201.661.9945

Weblloc: www.amertac.com

Westek 6043BC