Vogel's VFW326 Cantilever Wall Mount

Informació important de seguretat

Please read this entire manual before installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance. Keep this manual for future reference.

• Capacitat de pes: Do not exceed the maximum weight capacity of 15 kg (33 lbs). This mount is designed for flat panels up to 26 inches. Exceeding this limit may result in serious injury or property damage.
• Tipus de paret: This product is designed for installation on solid concrete walls, brick walls, or wood stud walls. Do not install on drywall alone.
• Eines: Use appropriate tools for installation. Ensure all screws are tightened securely but do not overtighten.
• Nens: Mantingueu els nens allunyats durant la instal·lació. Les peces petites poden ser un perill d'asfíxia.
• Instal·lació professional: Si no esteu segur del procés d'instal·lació, consulteu un professional qualificat.
• Comprovacions periòdiques: Comproveu periòdicament que el suport estigui ben fixat i que tots els elements de fixació estiguin ben ajustats.

Contingut del paquet

Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, do not proceed with installation.

• Muntatge de la placa de paret
• TV Connector Plate
• Maquinari de muntatge (cargols, ancoratges, volanderes)
• Clips de cable
• Manual d'instruccions

Imatge: Més deview of the Vogel's VFW326 Cantilever Wall Mount, showing the main components including the wall plate, articulating arm, and TV mounting plate.

Configuració i instal·lació

1. Eines necessàries

• Trepant
• Drill bits (appropriate for wall type and anchor size)
• Stud finder (for wood stud walls)
• Nivell
• Llapis
• Tornavís de cap Phillips
• Socket wrench or spanner
• Cinta mètrica

2. Triar una ubicació

Select a wall location that can safely support the weight of the mount and your television. Ensure there are no hidden electrical wires or plumbing in the drilling area. Use a stud finder to locate wood studs if applicable.

3. Muntatge de la placa de paret

1. Position the wall plate assembly on the desired location on the wall.
2. Use a level to ensure the wall plate is perfectly horizontal.
3. Mark the drilling holes with a pencil.
4. Drill pilot holes according to the recommended drill bit size for your wall type (e.g., concrete, brick, wood stud).
5. Insert wall anchors into the drilled holes if required for your wall type (e.g., concrete/brick).
6. Secure the wall plate assembly to the wall using the provided screws and washers. Tighten all screws firmly.

Image: Dimensional drawing of the VFW326 mount, illustrating key measurements for installation planning, including wall distance and articulation range.

4. Attaching the TV Connector Plate to the TV

1. Col·loqueu amb cura el televisor cara avall sobre una superfície suau i neta per evitar que es facin malbé la pantalla.
2. Identify the VESA mounting holes on the back of your TV. This mount supports VESA 75x75mm and 100x100mm patterns.
3. Seleccioneu els cargols i les volanderes adequats del kit de maquinari proporcionat que s'adaptin als forats de muntatge del televisor.
4. Attach the TV connector plate to the back of your TV, ensuring it is centered and securely fastened. Do not overtighten.

5. Mounting the TV to the Wall Plate

1. With assistance, carefully lift the TV with the attached connector plate.
2. Align the TV connector plate with the arm of the wall plate assembly.
3. Secure the TV connector plate to the arm using the designated locking mechanism or screws as per the specific design of your mount. Ensure the TV is firmly seated and locked into place.

Instruccions de funcionament

Ajustant Viewangle ing

The Vogel's VFW326 mount offers flexible viewopcions d'ing:

• Girar: The mount features two pivot points allowing the TV to swivel up to 180 degrees horizontally (90 degrees left and 90 degrees right, depending on TV size and wall clearance). Gently push or pull the TV to achieve the desired angle.
• Inclinació: The TV connector plate allows for a tilt adjustment of approximately -10 to +10 degrees. Loosen the tilt adjustment screws slightly, adjust the screen to the desired vertical angle, and then re-tighten the screws to secure the position.

Imatge: De dalt a baix view of the VFW326's articulating arm, demonstrating the range of motion and pivot points for adjusting the TV's position.

Gestió de cables

Use the provided cable clips to route and organize your TV cables along the mount's arm. This helps maintain a neat appearance and prevents cables from being pinched or damaged during adjustments.

Manteniment

• Neteja: Netegeu el suport amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
• Comprovacions periòdiques: Every 6-12 months, check all screws and fasteners to ensure they remain tight. Re-tighten if necessary.
• Lubricació: The pivot points are designed for smooth operation and generally do not require lubrication. If movement becomes stiff, contact support.

Resolució de problemes

• La muntura se sent fluixa: Ensure all wall mounting screws and TV attachment screws are securely tightened. Do not overtighten.
• El televisor no està anivellat: Check the wall plate installation with a level. If the wall plate is level, adjust the TV's tilt mechanism if available and re-tighten.
• Dificultat per moure el braç: Ensure no cables are obstructing the movement. Check for any debris in the pivot points.
• Peces que falten: If any parts were missing upon unboxing, do not proceed with installation. Contact customer support immediately.

Especificacions

Garantia i Suport

Vogel's products are manufactured to the highest standards. This product comes with a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Vogel's weblloc.

For technical support, missing parts, or any questions regarding your Vogel's VFW326 mount, please contact Vogel's customer service:

• Weblloc: www.vogels.com
• Correu electrònic: support@vogels.com
• Telèfon: Refer to the Vogel's weblloc per als números de contacte regionals.