Canton AS 105 Active Front-Firing Subwoofer Instruction Manual

1. Introducció

The Canton AS 105 is an active front-firing subwoofer designed to enhance your audio system's low-frequency performance. It features a discreet and modest design, a solid cabinet for reduced resonance, and a long-excursion woofer with wave technology for powerful and precise bass reproduction. This manual provides essential information for the safe and efficient use of your subwoofer.

2. Instruccions de seguretat

Please read and follow these safety instructions carefully before operating the device.

• Font d'alimentació: Connect the subwoofer only to an AC power source as indicated on the unit. Ensure the voltage coincideix amb la vostra font d'alimentació local.
• Ventilació: Do not block any ventilation openings. Allow adequate space around the unit for proper airflow to prevent overheating.
• Humitat i líquids: Do not expose the subwoofer to rain, moisture, dripping, or splashing. Do not place objects filled with liquids, such as vases, on the apparatus.
• Calor: No col·loqueu la unitat a prop de fonts de calor com ara radiadors, registres de calor, estufes o altres aparells (inclosos amplificadors) que produeixen calor.
• Col·locació: Place the subwoofer on a stable, level surface to prevent it from falling. Avoid placing it in direct sunlight or in areas with excessive dust or vibrations.
• Neteja: Desendolleu la unitat de la presa de corrent abans de netejar-la. Feu servir només un drap suau i sec. No utilitzeu netejadors líquids ni netejadors en aerosol.
• Manteniment: No intenteu atendre aquest producte vosaltres mateixos. Consulteu tots els serveis a personal de servei qualificat.

3. Contingut del paquet

Si us plau, comproveu que tots els elements siguin presents al paquet:

• Canton AS 105 Active Subwoofer Unit
• Cable d'alimentació
• Manual d'instruccions (aquest document)

4. Configuració

4.1. Col·locació

The placement of your subwoofer significantly impacts its performance. Experiment with different locations to find the best sound for your room.

• Col·locació de la cantonada: Placing the subwoofer in a corner often provides the most bass output due to room acoustics.
• Near Front Speakers: Placing the subwoofer near your main front speakers can help create a more seamless soundstage.
• Eviteu les obstruccions: Ensure the front-firing woofer is not obstructed by furniture or other objects.

4.2. Connexions

Before making any connections, ensure the subwoofer and your audio receiver/amplifier are turned off and unplugged from the power outlet.

1. LFE (Low-Frequency Effects) Connection: If your AV receiver has an LFE or Subwoofer Pre-Out jack, connect a single RCA cable from this output on your receiver to the LFE input on the Canton AS 105. This is the recommended connection for home theater systems.
2. Stereo RCA Connection: If your receiver does not have an LFE output, connect stereo RCA cables from your receiver's Pre-Out (or Front Left/Right Pre-Out) to the Left and Right Line-In inputs on the subwoofer.
3. Connexió d'alimentació: Once audio connections are made, connect the supplied power cable to the subwoofer's power inlet and then to a suitable AC wall outlet.

Imatge: Frontal view of the Canton AS 105 Active Front-Firing Subwoofer in its silver finish. The front-firing woofer is visible, indicating its design for direct sound projection.

5. Funcionament

5.1. Encendre/apagar

The Canton AS 105 features an auto-on/off function. When an audio signal is detected, the subwoofer will automatically power on. After a period of inactivity (no audio signal), it will enter standby mode.

• Interruptor d'alimentació: A main power switch is located on the rear panel. Set it to the 'ON' position for normal operation.
• Espera automàtica: The subwoofer will automatically switch to standby mode when no audio signal is present for approximately 15-20 minutes. It will reactivate upon detection of an audio signal.

5.2. Controls

Adjust the following controls on the rear panel to integrate the subwoofer with your main speakers and room acoustics:

• Volum/Guany: Adjusts the output level of the subwoofer. Start with a low setting and gradually increase until the bass blends seamlessly with your main speakers without overpowering them.
• Freqüència d'encreuament: This control determines the highest frequency the subwoofer will reproduce. Set it to match the low-frequency capabilities of your main speakers. A common starting point is 80 Hz, but refer to your main speaker specifications or experiment for optimal blending. If using an AV receiver with bass management, set the subwoofer's crossover to its maximum setting or bypass if available, and manage the crossover through the receiver.
• Interruptor de fase (0°/180°): This switch helps to ensure the subwoofer's output is in phase with your main speakers. Listen to music with strong bass and toggle the switch between 0° and 180°. Choose the setting that provides the most impactful and coherent bass.

6. Manteniment

To ensure the longevity and optimal performance of your Canton AS 105 subwoofer, follow these maintenance guidelines:

• Neteja: Dust the cabinet regularly with a soft, dry, lint-free cloth. For stubborn marks, slightly dampen the cloth with water, then wipe dry immediately. Avoid abrasive cleaners, solvents, or polishes.
• Ventilació: Comproveu periòdicament que les obertures de ventilació estiguin netes de pols i deixalles.
• Connexions de cable: Occasionally check all cable connections to ensure they are secure. Loose connections can lead to poor sound quality or intermittent operation.
• Eviteu condicions extremes: Do not expose the subwoofer to extreme temperatures, high humidity, or direct sunlight for extended periods.

7. Solució De Problemes

If you experience problems with your subwoofer, consult the following table before contacting service personnel.

8. Especificacions

9. Garantia i Suport

9.1. Informació de la garantia

The Canton AS 105 Active Front-Firing Subwoofer comes with a 2 any de garantia covering parts and labor, valid for the original owner. Please retain your proof of purchase for warranty claims.

9.2. Atenció al client

For technical assistance, warranty claims, or further inquiries, please visit the official Canton website or contact your authorized Canton dealer. You can typically find contact information and support resources on the manufacturer's weblloc:

Canton Official Weblloc: www.canton.de