1. Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of the Sloan Regal 186 Exposed Manual Urinal Flushometer, Model 3082675. This flushometer is designed for commercial urinal applications, featuring a 1.0 GPF (Gallons Per Flush) manual flush valve with a non-hold-open handle. It is ADA compliant and constructed with high copper, low zinc brass castings for dezincification resistance, ensuring durability and hygienic operation.
2. Informació de seguretat
Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in property damage or injury.
- Assegureu-vos que el subministrament principal d'aigua estigui tancat abans de començar qualsevol instal·lació o manteniment.
- Utilitzeu equips de protecció individual (EPI) adequats, com ara ulleres i guants de seguretat.
- All plumbing work should comply with local codes and regulations.
- No estrenyeu massa les connexions, ja que això pot danyar els components.
- If you are unsure about any part of the installation or repair process, consult a qualified plumber.
3. Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació.
- Sloan Regal 186 Exposed Manual Urinal Flushometer (Model 3082675)
- Adaptador de soldadura de suor
- Tub de coberta
- Connexió de rentat del trencador de buit
- 3/4" I.P.S. Screwdriver Bak-Chek Angle Stop
- Endoll de parada de control
- Brida de paret fosa amb cargol de fixació
- Mànec oscil·lant metàl·lic que compleix amb l'ADA
4. Configuració i instal·lació
This section outlines the general steps for installing the flushometer. Refer to detailed plumbing diagrams for specific configurations.
4.1. Prepare Water Supply
- Turn off the main water supply to the fixture.
- Flush the urinal to relieve any remaining water pressure.
- Ensure the water supply pipe is properly sized (typically 1-1/2" X 3/4" X 9" for the sweat kit).
4.2. Install Bak-Chek Angle Stop
- Thread the 3/4" I.P.S. screwdriver Bak-Chek angle stop onto the water supply pipe.
- Use pipe sealant or Teflon tape on threads to ensure a watertight seal.
- Apretar bé, però no apretar massa.
4.3. Mount Wall Flange
- Position the cast wall flange over the angle stop.
- Secure the wall flange to the wall using appropriate fasteners (not included) and the provided set screw.
4.4. Connect Flushometer Body
- Attach the flushometer body to the angle stop.
- Connect the vacuum breaker flush connection to the urinal's top spud.
- Assegureu-vos que totes les connexions estiguin estancades i estan ben segellades.
- Install the sweat solder adapter and cover tube as required for your specific plumbing setup.
4.5. Comprovacions finals
- Enceneu lentament el subministrament d'aigua principal.
- Comproveu totes les connexions per detectar fuites.
- Adjust the control stop plug to regulate water flow as needed.
5. Instruccions de funcionament
The Sloan Regal 186 Flushometer features a simple manual operation.
5.1. Flushing the Urinal
- Locate the ADA compliant metal oscillating non-hold-open handle on the flushometer.
- Push the handle down firmly and release. The non-hold-open design ensures a consistent 1.0 GPF flush, promoting water conservation.
- The flushometer will automatically reset after the flush cycle is complete.
6. Manteniment
Regular maintenance ensures optimal performance and longevity of your flushometer.
6.1. Neteja
- Clean the exterior of the flushometer with a mild, non-abrasive cleaner and a soft cloth.
- Avoid using harsh chemicals or abrasive pads, as these can damage the polished chrome finish.
6.2. Diaphragm and Gasket Inspection
- Periodically inspect the diaphragm and other internal gaskets for wear or damage.
- If leaks or inconsistent flushing occur, these components may need replacement. Refer to Sloan's official service guides for detailed replacement procedures.
6.3. Control Stop Adjustment
- The control stop plug allows for adjustment of water flow. If the flush volume is too low or too high, use a screwdriver to adjust the control stop.
- Turn clockwise to decrease flow, counter-clockwise to increase flow. Adjust incrementally until desired flush is achieved.
7. Solució De Problemes
This section addresses common issues you might encounter with your flushometer.
| Problema | Causa possible | Solució |
|---|---|---|
| Flushometer does not flush | Water supply turned off; Clogged internal components; Handle mechanism issue. | Check water supply valve; Inspect and clean diaphragm/bypass; Check handle assembly for obstructions. |
| Continuous flushing or slow closing | Worn or damaged diaphragm; Debris in bypass hole; Improperly seated components. | Replace diaphragm; Clean bypass hole; Reassemble components correctly. |
| Insufficient flush volume | Control stop not fully open; Low water pressure; Partially clogged inlet. | Adjust control stop to increase flow; Check building water pressure; Inspect and clean inlet screen. |
| Fuites de connexions | Loose connections; Damaged gaskets/seals; Improperly applied sealant. | Tighten connections; Replace worn gaskets/seals; Reapply pipe sealant correctly. |
If troubleshooting steps do not resolve the issue, contact Sloan customer support or a qualified plumber.
8. Especificacions
| Característica | Detall |
|---|---|
| Número de model | 3082675 |
| Volum de ras | 1.0 GPF (galons per descàrrega) |
| Acabar | Crom polit |
| Material | Brass (High copper, low zinc castings) |
| Connexió de l'aparell | Top Spud |
| Tipus de mànec | Manual, Non-Hold-Open, ADA Compliant Metal Oscillating |
| Trencador de buit | Inclòs |
| Angle Stop | 3/4" I.P.S. Screwdriver Bak-Chek |
| Dimensions (aprox.) | 1 x 2 x 3 polzades (dimensions del producte) |
| Pes de l'article | 6 lliures |
| Certificació | ADA |
9. Garantia i assistència
9.1. Informació de la garantia
The Sloan Regal 186 Exposed Manual Urinal Flushometer (Model 3082675) comes with a Garantia limitada d'3 any. This warranty covers defects in materials and workmanship under normal use and service. For full details regarding warranty coverage, limitations, and claims, please refer to the official Sloan warranty documentation or contact Sloan customer support.
9.2. Atenció al client
For technical assistance, replacement parts, or warranty inquiries, please contact Sloan customer support. Visit the official Sloan weblloc web per obtenir informació de contacte i recursos addicionals.
Note: Always provide your product model number (3082675) when contacting support for faster service.