Introducció
This manual provides detailed instructions for the proper setup, operation, and maintenance of your Vivanco FMH 6150 Wireless Headphone Set. This set includes over-ear stereo headphones with wireless transmission, volume control, and a frequency range of 20-20,000 Hz. The headphones are battery-operated and come with a convenient charging station. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
Contingut del paquet
Desembaleu la caixa amb cura i assegureu-vos que hi hagi tots els elements:
- Vivanco FMH 6150 Wireless Headphones
- Transmitter Station
- Unitat d'alimentació
- Conjunt d'adaptadors
- Rechargeable Batteries (2 product-specific batteries)
- Manual d'instruccions
Configuració
1. Installing Batteries in the Headphones
- Locate the battery compartment on one of the headphone earcups.
- Obriu la coberta del compartiment.
- Insert the two supplied rechargeable batteries, observing the correct polarity (+/-).
- Tanqueu bé la tapa del compartiment de la bateria.
2. Connecting the Transmitter Station
- Connect the power supply unit to the DC IN port on the transmitter station.
- Plug the power supply unit into a standard electrical outlet. The operation indicator on the charging station should illuminate.
- Connect the audio input cable from the transmitter station to the audio output (e.g., headphone jack or audio out) of your audio source (TV, stereo system, etc.). Use the appropriate adapter from the adapter set if necessary.
3. Càrrega dels auriculars
Before first use, fully charge the headphone batteries.
- Place the headphones onto the charging station, ensuring the charging contacts align.
- The charge indicator on the charging station will illuminate, indicating that charging is in progress.
- Allow sufficient time for a full charge (refer to specifications for typical charging time). The indicator may change or turn off when fully charged.
Image: Vivanco FMH 6150 Wireless Headphones. This image shows the over-ear headphones with their black and metallic design, featuring controls on the earcup.
Image: Vivanco FMH 6150 Charging Station. This image displays the black charging base with indicators for 'CHARGE' and 'ON', designed to hold the headphones for charging.
En funcionament
1. Encès / apagat
- To turn on the headphones, slide the ON/OFF switch located on the earcup to the 'ON' position.
- To turn off the headphones, slide the ON/OFF switch to the 'OFF' position to conserve battery life.
2. Ajust de volum
Use the volume control dial or buttons on the headphones to adjust the listening volume to a comfortable level. Start with a low volume and gradually increase it.
3. Tuning for Optimal Reception
The headphones utilize PLL technology for stable wireless transmission. If you experience static or poor audio quality, use the manual tuning dial on the headphones to fine-tune the reception frequency until a clear signal is achieved. Ensure the transmitter station is powered on and transmitting audio.
Manteniment
Neteja
- Wipe the headphones and transmitter station with a soft, dry cloth.
- Do not use liquid cleaners or abrasive materials, as these can damage the surfaces.
- Keep the charging contacts on both the headphones and the charging station clean and free of dust.
Cura de la bateria
- To maximize battery life, fully charge the headphones before first use and after extended periods of non-use.
- If the headphones will not be used for a long time, remove the batteries to prevent leakage.
- Only use the specified rechargeable batteries provided with the product or approved replacements.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| No hi ha so dels auriculars | Headphones are off or batteries are depleted. Transmitter is off or not connected. Audio source is muted or volume is too low. | Ensure headphones are on and charged. Check transmitter power and audio cable connection. Increase volume on audio source and headphones. |
| Qualitat del so estàtica o deficient | Interference from other wireless devices. Headphones not properly tuned to the transmitter. | Adjust the manual tuning dial on the headphones. Move the transmitter away from other electronic devices. |
| Els auriculars no es carreguen | Headphones not correctly placed on the charging station. Charging contacts are dirty. Transmitter power supply issue. | Ensure headphones are seated correctly and contacts align. Clean charging contacts. Verify transmitter power supply is connected and working. |
| Durada de la bateria curta | Les piles són velles o no estan completament carregades. | Ensure batteries are fully charged before use. Consider replacing old rechargeable batteries with new ones. |
Especificacions
- Nom del model: FMH 6150
- Marca: Vivanco
- Col·locació de les orelles: Sobre l'orella
- Factor de forma: Sobre l'orella
- Tecnologia de connectivitat: Sense fil (RF)
- Interval de freqüència: 20 Hz - 20,000 Hz
- Tipus de control: Control de volum
- Característiques especials: Wireless, PLL Technology
- Components inclosos: Wireless Headphones, Transmitter Station, Power Supply, Adapter Set, Batteries
- Bateries: 2 product-specific rechargeable batteries (included)
- Material: Imitació de pell
- Color: Metàl·lic
- Auriculars Jack: Cap
- Control de soroll: Cap
Garantia i Suport
For warranty information or technical support, please refer to the documentation included with your purchase or contact Vivanco customer service. Keep your proof of purchase for warranty claims.