Oxford Premium Rear Paddock Stand Instruction Manual

Producte acabatview

The Oxford Premium Rear Paddock Stand is designed to provide stable and secure lifting for the rear wheel of your motorcycle, facilitating maintenance, cleaning, and storage. It features an ultra-strong frame, double wheels for smooth operation, and heavy-duty steel clamps for rigidity.

Informació de seguretat

Always prioritize safety when using the paddock stand. Read all instructions carefully before use. Ensure the motorcycle is stable and on a flat, level surface. Never work under a motorcycle supported only by a paddock stand without additional safety measures. Always use appropriate personal protective equipment.

• Ensure the stand is correctly assembled and all fasteners are tightened.
• Verify the stand is compatible with your motorcycle's swingarm bobbins or lifting points.
• Always have a second person assist when lifting the motorcycle for the first few times.
• Do not exceed the weight capacity of the stand.
• Mantingueu les mans i els peus allunyats de les peces mòbils durant el funcionament.

Contingut del paquet

The Oxford Premium Rear Paddock Stand package includes:

• 1 x Oxford Premium Rear Paddock Stand frame
• 2 x Double wheels (pre-installed or requiring attachment)
• 2 x Heavy-duty steel clamps (swingarm cups or bobbins, depending on model)
• 1 x Lever handle
• 2 x Clean Grips (for handlebar protection)

Muntatge i muntatge

The Oxford Premium Rear Paddock Stand is designed for straightforward assembly. Most components are pre-assembled. Follow these steps to prepare your stand for use:

1. Desempaquetar components: Traieu amb cura totes les peces de l'embalatge.
2. Inspeccionar per danys: Check all components for any signs of damage during transit. Do not use if damaged.
3. Attach Wheels (if not pre-installed): Securely attach the double wheels to the stand's base using the provided hardware. Ensure they rotate freely.
4. Install Lifting Clamps/Bobbins: Attach the heavy-duty steel clamps (or bobbins, if your model uses them) to the stand's lifting arms. Ensure they are oriented correctly to engage with your motorcycle's swingarm or bobbins. Tighten all bolts securely.
5. Fixeu la maneta de palanca: Insert the lever handle into its designated slot on the stand.
6. Prepare Clean Grips: The included Clean Grips can be attached to the stand's lifting points for comfortable handling or placed on your motorcycle's handlebar grips to protect them during maintenance.

Image: A motorcycle resting securely on a rear paddock stand, with a strap providing additional stability. The rear wheel is elevated, indicating readiness for maintenance or storage.

Instruccions de funcionament

Follow these steps to safely lift and lower your motorcycle using the Oxford Premium Rear Paddock Stand:

1. Position Motorcycle: Place your motorcycle on a firm, level surface. Ensure the front wheel is straight and the handlebars are locked or secured.
2. Engage Front Brake (Optional but Recommended): If possible, engage the front brake with a strap or bungee cord to prevent the motorcycle from rolling forward.
3. Posició de suport: With the motorcycle on its side stand, position the paddock stand behind the rear wheel. Align the lifting clamps/bobbins with the motorcycle's swingarm or bobbins.
4. Contacte inicial: Gently push the stand forward until both lifting points make firm contact with the motorcycle's swingarm or bobbins. Ensure the stand is centered and stable.
5. Lift Motorcycle: While holding the motorcycle upright with one hand (or with assistance), firmly and smoothly push down on the stand's lever handle. The motorcycle's rear wheel will lift off the ground.
6. Verifica l'estabilitat: Once lifted, gently rock the motorcycle to ensure it is stable on the stand.
7. Lower Motorcycle: To lower, firmly hold the motorcycle upright. Gently and slowly lift the stand's lever handle, allowing the motorcycle to descend onto its side stand. Once the side stand is engaged, remove the paddock stand.

Image: Close-up of a motorcycle handlebar with red grips, illustrating where the optional 'Clean Grips' can be placed for protection during maintenance.

Manteniment

Regular maintenance will ensure the longevity and safe operation of your Oxford Premium Rear Paddock Stand:

• Neteja: Netegeu el suport amb anunciamp cloth after each use to remove dirt, grease, and grime.
• Lubricació: Periodically apply a light lubricant to the wheel axles and pivot points to ensure smooth operation.
• Inspecció: Regularly inspect the frame for any signs of bending, cracks, or damage. Check all bolts and fasteners for tightness and re-tighten if necessary.
• Condició de la roda: Examine the wheels for wear or damage. Replace if they show signs of cracking or excessive wear.
• Emmagatzematge: Store the stand in a dry, clean environment away from extreme temperatures and corrosive materials.

Resolució de problemes

If you encounter issues with your paddock stand, refer to the following common problems and solutions:

• Stand is difficult to lift:
  • Ensure the motorcycle is on a level surface.
  • Verify the lifting clamps/bobbins are correctly positioned and making full contact.
  • Comproveu si hi ha obstruccions.
  • Ensure the stand's pivot points are lubricated.
• Motorcycle feels unstable on the stand:
  • Re-check that the stand is centered and the lifting points are fully engaged.
  • Assegureu-vos que tots els cargols i elements de fixació estiguin ben ajustats.
  • Confirm the stand is on a firm, level, non-slip surface.
  • Consider using additional tie-down straps for extra security, especially for extended storage or heavy maintenance.
• Les rodes no giren suaument:
  • Inspect wheels for debris or damage. Clean or replace if necessary.
  • Apliqueu lubricant als eixos de les rodes.

Especificacions

About Oxford Products

Oxford Products Ltd is a global leader in the development of motorcycle and bicycle products. Their market-leading products are designed and rigorously tested at their purpose-built headquarters by a team of active enthusiasts. The company is committed to quality, durability, and usability across its range of essential rider equipment.

Garantia i Suport

Oxford products are manufactured to high standards. For specific warranty details, please refer to the warranty card included with your product or visit the official Oxford Products website. For technical assistance, parts, or customer support, please contact Oxford Products USA Inc. customer service.

Informació de contacte:

• Weblloc: Visit the Oxford Store on Amazon (per a informació general del producte)
• Consulteu l'embalatge del producte o la informació oficial weblloc web per obtenir dades de contacte directe.