Artemide Tizio Classic Desk Lamp Manual d'instruccions

Introducció

This manual provides essential information for the safe and efficient use of your Artemide Tizio Classic Desk Lamp. Please read these instructions thoroughly before installation and operation, and retain them for future reference.

The Artemide Tizio Classic Task Lamp, designed by Richard Sapper in 1972, is recognized for its adjustable design and quality construction. It is a modern design classic, featured in prominent museum collections.

Instruccions de seguretat

Assegureu-vos que lamp is connected to a 110 Volt power supply, suitable for USA and Canadian markets.
Do not exceed the maximum compatible wattage of 50 watts for the halogen bulb.
El lamp head can become very hot during prolonged use. Avoid direct contact with the lamp head when in operation or immediately after turning off.
Desconnecteu sempre l'alimentació abans de netejar o fer qualsevol manteniment.
This product is designed for indoor use only. Do not expose to moisture or use in wet locations.
Mantenir allunyat de materials inflamables.
Si alguna part de lamp is damaged, discontinue use and contact customer support.

Components del producte

The Artemide Tizio Classic Desk Lamp consists of the following main components:

Base: Provides stability and houses the transformer.
Braços ajustables: Counterbalanced arms for flexible positioning.
Lamp Cap: Contains the halogen bulb and reflector.
Interruptor atenuador: Integrated control for light intensity.
Cable d'alimentació: Per connectar a una presa de corrent.

Instruccions de configuració

Desembalatge: Traieu amb cura tots els components de l'embalatge. Conserveu l'embalatge per a futurs transports o emmagatzematges.
Col·locació: Col·loca la lamp base on a stable, flat surface, such as a desk or table. Ensure adequate space for the adjustable arms to move freely.
Connexió d'alimentació: Plug the power cord into a standard 110 Volt electrical outlet.
Bulb Installation (if not pre-installed):
- Assegureu-vos que lamp està desconnectat.
- Gently open the lamp coberta del cap.
- Insert a compatible 50-watt (maximum) halogen bulb (A19 shape size) into the socket. Do not touch the bulb directly with bare hands; use a cloth or glove to avoid oil residue.
- Tanca la lamp head cover securely.

Instruccions de funcionament

Encès/apagat: El lamp is controlled by a dimmer switch, typically located on the base or lower arm. Press the switch to turn the lamp encès o apagat.
Ajust de brillantor: Rotate or press and hold the dimmer switch (depending on model variation) to adjust the light intensity. The lamp offers variable brightness settings.
Col·locació de la Lamp: The Tizio lamp features counterbalanced arms that allow for smooth and precise adjustment of the lamp head's position.
- Gently grasp the lamp head or the upper arm.
- Move the arms to achieve the desired height and angle for illumination. The lamp is designed to hold its position once adjusted.
- El lamp head can be rotated to direct light as needed for task lighting or indirect illumination.

Manteniment

Neteja:
- Desendolleu sempre la lamp abans de netejar.
- Permet la lamp to cool completely if it has been in use.
- Wipe the metal and plastic surfaces with a soft, dry cloth. For stubborn marks, a slightly damp es pot fer servir un drap amb sabó suau, seguit d'un drap sec.
- Do not use abrasive cleaners, solvents, or polishes, as these can damage the finish.
Substitució de bombetes:
- Assegureu-vos que lamp is unplugged and the bulb is cool.
- Obriu la lamp coberta del cap.
- Carefully remove the old halogen bulb.
- Install a new 12V, 50-watt (maximum) halogen bulb (A19 shape size). Use a clean cloth or glove to handle the new bulb.
- Tanca la lamp head cover securely.
Inspecció del cable: Periodically inspect the power cord for any signs of damage, fraying, or wear. If damage is found, discontinue use and contact a qualified technician or Artemide customer support.

Resolució de problemes

Problema	Causa possible	Solució
Lamp no s'encén.	No hi ha corrent a la presa de corrent. La bombeta està defectuosa o solta. Dimmer switch malfunction.	Comproveu la presa de corrent amb un altre dispositiu. Ensure bulb is correctly seated and not burnt out. Replace if necessary. Contact customer support if switch is suspected.
La llum parpelleja o és tènue.	Connexió de la bombeta fluixa. Bombeta a punt de finalitzar la seva vida útil. Problema amb l'interruptor d'intensitat.	Reseat or replace bulb. Substitueix la bombeta. Contacta amb l'assistència al client.
Lamp arms do not hold position.	Internal mechanism wear.	This may indicate wear on the counterbalancing system. Contact Artemide customer support for assistance.

Especificacions

Model: A009048
Marca: Artemida
Tipus: Escriptori Lamp
Estil: Classic, Industrial
Material: Alloy Steel, Aluminum, Plastic (shade)
Acabat: Chrome (metal components), Black (shade)
Dimensions del producte: 4.25"D x 6"W (Base Diameter: 4.25 Inches)
Pes de l'article: 10.23 lliures
Font de llum: Halògen
Tipus de bombeta: A19 shape size, Max 50 Watts
Voltage: 110 Volts
Mètode de control: Touch (Dimmer Switch)
Característica especial: Ajustable
Ús interior/exterior: Només a l'interior
Font d'alimentació: Elèctric amb cable

Informació de la garantia

Artemide products are manufactured to high-quality standards. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your product or visit the official Artemide weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.

Atenció al client

For technical assistance, replacement parts, or any inquiries regarding your Artemide Tizio Classic Desk Lamp, please contact Artemide customer support.

Fabricant: Artemida
Weblloc: www.artemide.com (Si us plau, visiteu el lloc web oficial) website for contact information specific to your region.)

Artemide A009048