Electro-Harmonix Micro Synth Analog Guitar Synthesizer Pedal User Manual

Introducció

The Electro-Harmonix Micro Synth is an analog guitar synthesizer pedal designed to transform your guitar's sound into classic vintage synthesizer tones. This pedal offers a wide range of sonic possibilities, from percussive stabs to bowed effects, without requiring special guitar pickups. Its intuitive slider interface allows for precise control over various voice and filter parameters.

Configuració

Connexió d'alimentació

• Connect the provided 9V DC power adapter to the 9V power jack on the top right of the Micro Synth pedal.
• Plug the power adapter into a standard AC outlet. The 'POWER ON' LED will illuminate when the unit is receiving power.

Connexions d'àudio

• Connecteu la vostra guitarra al ENTRADA jack al costat dret del pedal mitjançant un cable d'instrument estàndard de 1/4 de polzada.
• Connecteu el SORTIDA presa al costat esquerre del pedal al vostre amplifier or other effects pedals using another 1/4-inch instrument cable.

Imatge: Superior view of the Electro-Harmonix Micro Synth pedal, illustrating the layout of the sliders for Voice Mix and Filter Sweep, along with the input, output, and power connections.

Controls i funcionament

The Micro Synth features ten sliders to control various aspects of the synthesized sound. These are divided into two main sections: Voice Mix and Filter Sweep.

Voice Mix Section

This section allows you to blend different sonic elements to create your base synthesizer tone.

• DISPARADOR: Adjusts the sensitivity of the envelope follower. Higher settings make the synth respond to lighter playing.
• SUB OCTAVE: Controls the volume of a signal one octave below the original guitar signal.
• GUITARRA: Controls the volume of your original, unprocessed guitar signal.
• OCTAVE: Controls the volume of a signal one octave above the original guitar signal.
• ONADA QUADRADA: Controls the volume of a square wave signal, which can be used for distortion or synth textures.

Attack Delay

This slider controls the attack time of the synthesized sound, allowing for softer, slower swells or immediate, percussive attacks.

• ATTACK DELAY: Adjusts the time it takes for the synthesized sound to reach its full volume. Lower settings result in a faster attack, while higher settings create a slower, swelling effect.

Filter Sweep Section

This section shapes the tonal characteristics of the synthesized sound, allowing for dynamic filter effects.

• RESONÀNCIA: Controls the emphasis of the filter's cutoff frequency, adding a 'wah' or 'vowel' quality.
• START FREQ: Sets the initial frequency of the filter sweep.
• STOP FREQ: Sets the final frequency of the filter sweep.
• TARIFA: Controls the speed at which the filter sweeps from the Start Frequency to the Stop Frequency.

ExampConfiguració

The Micro Synth offers a vast array of sounds. Here are a few examples of how to achieve distinct effects:

• Bowed Effect: To achieve a bowed string sound, set the RETARD D'ATAC to a higher value (slower attack). Experiment with blending the SUB OCTAVE i OCTAVE voices, and adjust the RESONÀNCIA for a vocal-like quality.
• Percussive Synth: For a sharp, percussive synth sound, set the RETARD D'ATAC to a lower value (fast attack). Focus on the ONADA QUADRADA i OCTAVE voices, and use the ESBORDA DEL FILTRE to create a quick, sharp tonal change.
• Fat Analog Lead: Blend the SUB OCTAVE, GUITARRA, i OCTAVE voices. Set the RETARD D'ATAC to a medium setting for sustain. Adjust the RESONÀNCIA i START/STOP FREQ to find a sweet spot for a thick, sustained lead tone.

Especificacions

Manteniment

To ensure the longevity and optimal performance of your Electro-Harmonix Micro Synth, follow these maintenance guidelines:

• Neteja: Use a soft, dry cloth to wipe down the pedal's exterior. Avoid abrasive cleaners or solvents, which can damage the finish or internal components.
• Emmagatzematge: Guardeu el pedal en un lloc fresc i sec, allunyat de la llum solar directa, temperatures extremes i humitat elevada. Quan no l'utilitzeu durant períodes prolongats, desconnecteu-lo de l'alimentació.
• Manipulació: Handle the pedal with care to prevent physical damage to the sliders, jacks, and footswitch.

Resolució de problemes

If you encounter issues with your Micro Synth, consider the following common troubleshooting steps:

• Sense energia: Ensure the 9V DC power adapter is correctly connected to both the pedal and a working power outlet. Verify that the power adapter is the correct type and voltage for the Micro Synth.
• Sense so: Check all instrument cables for proper connection and functionality. Ensure your guitar's volume is up and your amplifier is on and set to an audible volume. Confirm that the Micro Synth's output slider is not set to zero.
• Soroll/bruix no desitjat: Try using a different power outlet or a dedicated power supply designed for guitar pedals to minimize interference. Ensure all cables are in good condition and properly shielded.
• Synth Effect Not Engaging: Ensure the footswitch is pressed to engage the effect (the 'POWER ON' LED indicates power, not effect engagement). Adjust the TRIGGER slider to ensure it is sensitive enough to your playing dynamics.

Garantia i Suport

The Electro-Harmonix Micro Synth comes with a 1-year manufacturer defect warranty. For warranty claims, technical support, or further assistance, please contact Electro-Harmonix directly or visit their official weblloc.

You can also find more information and products from Electro-Harmonix by visiting the Electro-Harmonix Store.