Pentair R171096

Pentair R171096 Rainbow 320 Automatic In-Line Chlorine/Bromine Feeder User Manual

Model: R171096

Introducció

This manual provides essential information for the installation, operation, and maintenance of your Pentair R171096 Rainbow 320 Automatic In-Line Chlorine/Bromine Feeder. This device is designed to maintain consistent water sanitation in pools and spas by automatically dispensing chlorine or bromine tablets.

Informació de seguretat

Always read and follow all instructions carefully. Chemical feeders contain corrosive materials. Wear appropriate personal protective equipment, including eye protection and gloves, when handling chemicals and servicing the feeder. Keep out of reach of children. Ensure proper ventilation during installation and maintenance.

Configuració

The Pentair R171096 Rainbow 320 feeder is designed for permanent installation in the return line of new or existing pools or spas. It comes standard with a 2-inch slip PVC fitting and adapters for 1-1/2 inch plumbing. No special venting is required for this unit.

  1. Instal·lació: Install the feeder according to the provided instructions. If you are unsure about any step, it is recommended to seek professional assistance.
  2. Connexió de fontaneria: Ensure the feeder is securely connected to your pool or spa's plumbing system. Unions are not included and must be purchased separately if needed for your specific setup.
Pentair R171096 Rainbow 320 Automatic In-Line Chlorine/Bromine Feeder installed in a pool system

Image: The Pentair R171096 Rainbow 320 Automatic In-Line Chlorine/Bromine Feeder integrated into a typical pool plumbing system.

Instruccions de funcionament

This feeder is designed to hold approximately 11 large or 98 small bromine or slow-dissolving trichlor tablets.

  1. Loading Tablets: Carefully load the feeder with the appropriate number of slow-dissolving trichlor or bromine tablets. Refer to your pool or spa's size and water volume for recommended dosage.
  2. Ajust del flux: Adjust the control valve to regulate the chemical output. Start with a lower setting and gradually increase until the desired sanitizer level is achieved in your pool or spa water.
Accessories included with the Pentair R171096 feeder, including a hose, PVC fittings, and silicone lubricant.

Image: Included accessories for installation and maintenance, such as the hose, PVC fittings, and silicone lubricant.

Manteniment

Regular monitoring and maintenance are crucial to ensure consistent water sanitation and a healthy swimming environment. Periodically check the tablet level and refill as needed. Inspect the feeder for any signs of wear or damage, especially the O-rings and seals. Apply silicone lubricant to O-rings to ensure a tight seal and ease of opening.

Resolució de problemes

  • Low Sanitizer Levels:
    • Check tablet levels and refill if empty.
    • Increase the setting on the control valve to allow more chemical flow.
    • Ensure proper water circulation through the feeder.
  • High Sanitizer Levels:
    • Decrease the setting on the control valve.
    • Ensure the feeder is not overfilled with tablets.
  • Fuites:
    • Inspect all connections and fittings for tightness.
    • Check O-rings for damage or improper seating. Lubricate O-rings with silicone lubricant.
  • Dificultat per obrir la tapa:
    • Ensure the system pressure is off before attempting to open.
    • Apply silicone lubricant to the lid O-ring.
    • Consider using a specialized lid wrench if available for your model.

Especificacions

MarcaPentair
Número de modelR171096
Nom del tipus d'elementRainbow 320 Automatic In-Line Chlorine/Bromine Feeder For Pool And Spa
Pes de l'article4.5 lliures
Formulari d'articleTauleta
Components inclososAutomatic In-Line Chlorine/Bromine Feeder
UPC788379004385

Informació de la garantia

This Pentair R171096 Rainbow 320 Automatic In-Line Chlorine/Bromine Feeder comes with a Garantia del fabricant de 1 anys. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the warranty documentation included with your product or visit the official Pentair weblloc.

Suport

For technical assistance, replacement parts, or further inquiries, please contact Pentair Customer Support. You can find contact information on the official Pentair weblloc web o a través de la documentació que s'inclou amb el producte.

  • Recursos en línia: Visita www.pentair.com for product manuals, FAQs, and support.
  • Atenció al client: Refer to your product packaging or the Pentair weblloc web per obtenir números de contacte actuals i horaris d'atenció.

© 2023 Pentair. Tots els drets reservats.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.