Broan-NuTone LA11WH Wired Door Chime Instruction Manual

Descripció del producte

The Broan-NuTone LA11WH Wired Door Chime is a white-textured receiver designed to provide distinct audible alerts for multiple entrances. It features a two-note chime for the front door and a single-note chime for a second door (e.g., back door), ensuring you can differentiate between visitors. This wired unit connects to a 16V transformer (sold separately) for continuous, battery-free operation. Its classic, white textured finish is designed to complement various home decors.

Image: The Broan-NuTone LA11WH Wired Door Chime, featuring its white textured finish, mounted on a wall. This unit provides a two-note chime for the front door.

Característiques clau

• Funcionament amb cable: Ensures continuous service without the need for batteries, connecting to a 16V transformer (sold separately).
• Dual Tones: Provides a distinct two-note chime for the front door and a single-note chime for a second door, allowing for easy differentiation of visitors.
• Disseny clàssic: Features a timeless white textured finish that integrates seamlessly with various home interiors.
• Mida compacta: Measures approximately 2.39 inches (depth) x 8.27 inches (width) x 5.49 inches (height).
• Compatibilitat: Can replace older NuTone LB12WW and Broan RC105 models.

Informació de seguretat

ADVERTIMENT: To avoid electric shock, ensure power is turned OFF at the circuit breaker or fuse box before beginning installation. Always consult a qualified electrician if you are unsure about any steps. This device operates on low voltage (16V AC), but proper installation is crucial.

Eines necessàries

• Tornavís (Phillips i/o de punta plana)
• Pelacables
• Perforar (si calen nous forats de muntatge)
• Llapis

Diagrama de cablejat i connexions

The LA11WH chime requires a 16-Volt AC transformer (not included, sold separately, e.g., NuTone C905 or C915). It supports wiring for two doors: a front door and a second door (e.g., back door).

1. Identificar els cables: Typically, you will have three low-voltage wires: one from the transformer, one from the front doorbell pushbutton, and one from the second doorbell pushbutton.
2. Connecta el transformador: Connect the transformer wire to the terminal labeled "TRANS" on the chime unit.
3. Connect Front Door: Connect the front doorbell pushbutton wire to the terminal labeled "FRONT" on the chime unit.
4. Connect Second Door: Connect the second doorbell pushbutton wire to the terminal labeled "REAR" or "BACK" on the chime unit.
5. Connexions segures: Ensure all wire connections are tight and secure under their respective screw terminals.

Image: The Broan-NuTone LA11WH Door Chime installed in a home entryway, highlighting its modern design and the requirement for a 16V transformer for power.

Instruccions de muntatge

1. Remove Old Chime (if applicable): Carefully disconnect wires and remove your existing chime unit from the wall.
2. Preparació de la superfície de muntatge: Assegureu-vos que la superfície de la paret estigui neta i lliure de residus.
3. Mount Baseplate: The LA11WH chime unit typically mounts directly to the wall using screws. Align the chime's baseplate with the existing wiring hole and mark screw locations. Secure the baseplate to the wall using appropriate screws.
4. Connecteu els cables: Follow the wiring diagram above to connect the low-voltage wires to the correct terminals on the chime unit.
5. Adjuntar la coberta: Once wiring is complete and secure, carefully align the chime cover with the baseplate and snap it into place. Ensure it is firmly seated.
6. Restaura l'alimentació: Torneu a encendre l'alimentació a l'interruptor automàtic o a la caixa de fusibles.
7. Test Chime: Press both the front and second doorbell pushbuttons to verify correct operation and distinct chime tones.

Tons de campana

The Broan-NuTone LA11WH Door Chime is designed to provide distinct audible signals for different entrances:

• Porta principal: When the front doorbell pushbutton is pressed, the chime will produce a two-note melody (e.g., "Ding-Dong").
• Second Door: When the second doorbell pushbutton (e.g., for a back door or side door) is pressed, the chime will produce a single-note sound (e.g., "Dong").

Image: The Broan-NuTone LA11WH Door Chime installed in a home, illustrating its capability to provide different chime tones for multiple entrances.

Neteja

To maintain the appearance and functionality of your door chime:

• Wipe the exterior cover with a soft, damp tela.
• No utilitzeu netejadors abrasius, dissolvents ni productes químics agressius, ja que poden danyar l'acabat.
• Ensure no moisture enters the internal components of the chime.

Problemes comuns i solucions

Informació de la garantia

The Broan-NuTone LA11WH Door Chime is backed by a Garantia limitada d'1 any. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty documentation included with your product or visit the official Broan-NuTone weblloc.

Atenció al client

For technical assistance, troubleshooting, or to inquire about replacement parts, please contact Broan-NuTone customer support. You can find contact information (phone numbers, email, or online support portal) on the official Broan-NuTone weblloc o en els materials d'embalatge.

Recursos en línia: For additional information, FAQs, and product registration, visit the official Broan-NuTone weblloc: www.broan-nutone.com