Bostitch 21680B 80 Series Fine Wire Stapler Instruction Manual

1. Producte acabatview

The Bostitch 21680B is an air-powered fine wire stapler designed for various fastening applications. This tool is engineered for efficiency and durability, utilizing 80 series staples with a 1/2-inch crown and leg lengths ranging from 1/4 inch to 1/2 inch.

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Bostitch 21680B stapler.

Image: The Bostitch 21680B Fine Wire Stapler, showcasing its yellow and black design and staple magazine.

2. Informació de seguretat

Always observe the following safety precautions when operating the Bostitch 21680B stapler to prevent injury and tool damage:

• Llegiu i enteneu totes les instruccions abans de fer servir l'eina.
• Wear appropriate personal protective equipment (PPE), including safety glasses with side shields, hearing protection, and gloves.
• Ensure the air compressor is set to the recommended operating pressure (refer to specifications). Do not exceed the maximum allowable pressure.
• Disconnect the air supply before loading staples, performing maintenance, clearing jams, or when the tool is not in use.
• No apunteu mai l'eina cap a vosaltres mateixos ni cap als altres.
• Keep hands and body parts clear of the discharge area.
• Use only the specified staples for this tool.
• No feu servir l'eina si està danyada o no funciona correctament.
• Mantenir la zona de treball neta i ben il·luminada.

3. Components

Familiarize yourself with the main components of your stapler:

• Activador: Activa el mecanisme de grapat.
• Revista: Holds the strip of staples.
• Port d'escapament: Releases compressed air.
• Entrada d’aire: Connection point for the air hose.
• Contact Trip: Safety mechanism that must be pressed against the workpiece for the tool to fire.

4. Configuració

4.1 Connexió al subministrament d'aire

1. Assegureu-vos que el compressor d'aire estigui apagat i que el dipòsit d'aire estigui buidat.
2. Attach a quick-connect fitting (not included) to the stapler's air inlet.
3. Connect the air hose from the compressor to the stapler's quick-connect fitting.
4. Set the air compressor regulator to the recommended operating pressure (typically 70-100 PSI, refer to tool specifications for exact range).
5. Enceneu el compressor d'aire.

4.2 Càrrega de grapes

1. Disconnect the air supply before loading staples.
2. Push the magazine latch or release button to open the staple magazine.
3. Insert a strip of 80 series staples into the magazine with the staple points facing down. Ensure the staples are correctly oriented.
4. Close the magazine until it latches securely.
5. Torneu a connectar el subministrament d'aire.

5. Instruccions de funcionament

5.1 Funcionament bàsic

1. Ensure the stapler is properly loaded with staples and connected to the air supply.
2. Subjecteu la grapadora fermament amb les dues mans.
3. Place the nose of the tool (contact trip) firmly against the workpiece where the staple is to be driven.
4. Squeeze the trigger to drive a staple.
5. Deixeu anar el gallet i aixequeu l'eina de la peça de treball.

5.2 Depth Adjustment (If applicable)

Some models may feature a depth adjustment mechanism. If your model includes this feature, refer to the markings on the tool for adjusting staple depth. Rotate the adjustment dial or lever to achieve the desired staple penetration.

6. Manteniment

Regular maintenance ensures optimal performance and extends the life of your stapler.

6.1 Manteniment diari

• Desconnecteu el subministrament d'aire.
• Add 3-5 drops of pneumatic tool oil (not included) into the air inlet before each use.
• Netegeu l'eina amb un drap net i sec per eliminar la pols i les restes.
• Comproveu que tots els cargols i elements de fixació estiguin ben ajustats. Estrenyeu-los si cal.

6.2 Manteniment del compressor d'aire

Regularly drain moisture from your air compressor tank to prevent rust and ensure clean air supply to the tool.

6.3 Emmagatzematge

Store the stapler in a clean, dry environment, disconnected from the air supply.

7. Solució De Problemes

Per eliminar un embús: Desconnecteu el subministrament d'aire. Open the magazine and carefully remove any jammed staples or debris. Do not force staples out. Reconnect air supply and test.

8. Especificacions

• Model: 21680B
• Sèrie de grapes: Sèrie 80
• Crown Size: 1/2 polzada
• Longitud de la cama: De 1/4 de polzada a 1/2 de polzada
• Font d'alimentació: Accionat per aire
• Pressió de funcionament: Typically 70-100 PSI (consult tool for exact range)
• Capacitat de la revista: Full Strip (approximately 156 fasteners)
• Pes de l'article: 2.15 lliures
• Material: Metall
• Color: groc
• Components inclosos: Adjunts
• Fabricant: Stanley Bostitch

9. Garantia i Suport

For warranty information, technical support, or service inquiries, please refer to the official Bostitch weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.