1. Introducció
This manual provides essential information for the safe and efficient use of your Philips 383133 PL-C ALTO 13W/841 Fluorescent Light Bulb. Please read these instructions carefully before installation and retain them for future reference.
The Philips 383133 is a compact fluorescent lamp (CFL) designed for general lighting applications. It features a 13-watt power consumption, a GX23-2 pin base, and emits a cool white light with a color temperature of 4100 Kelvin.
2. Informació de seguretat
- ADVERTIMENT: Always disconnect power before installing, removing, or servicing the bulb to prevent electric shock.
- Do not use this bulb in dimmable fixtures unless specifically rated for dimmable CFLs.
- Do not use this bulb in totally enclosed luminaires unless the luminaire is designed for CFLs.
- Avoid touching the glass portion of the bulb with bare hands during installation or removal. Use a clean cloth or gloves.
- If the bulb breaks, ventilate the room for 15 minutes and carefully clean up the broken glass and mercury using appropriate disposal methods for fluorescent lamps.
- This bulb contains mercury. Dispose of in accordance with local, state, and federal laws. Visit www.epa.gov/cfl/recycling-and-disposal-cfls per a més informació.
3. Producte acabatview
The Philips 383133 is a compact fluorescent light bulb designed for efficiency and longevity. Its GX23-2 pin base ensures a secure connection in compatible fixtures.
Image of the Philips 383133 PL-C ALTO 13W/841 2P 1CT GX23-2 Fluorescent Light Bulb, showing its compact design and pin base.
4. Especificacions
| Característica | Especificació |
|---|---|
| Marca | Philips |
| Número de model | 383133 |
| Tipus de llum | Fluorescent (CFL) |
| Wattage | 13 watts |
| Tipus de base | GX23-2 |
| Color clar | Blanc fresc |
| Temperatura de color | 4100 Kelvin (as per description) / 4200 Kelvin (as per specifications) - Note: There is a slight discrepancy in the provided data. |
| Brillantor | 800 lúmens |
| Vida Mitjana | 10,000 hores |
| Equivalent incandescent | 60 watts |
| Voltage Freqüència | De 100 a 240 volts i de 50 a 60 hertz |
| Material | coure |
| Ús interior/exterior | A l'aire lliure |
5. Instal·lació
- Apagueu l'alimentació: Locate the circuit breaker or fuse box that controls the power to the fixture where the bulb will be installed. Turn off the power completely.
- Treure la bombeta antiga (si escau): If replacing an existing bulb, allow it to cool down completely. Gently pull the old bulb straight out from its base. Do not twist.
- Inseriu una bombeta nova: Align the two pins of the Philips 383133 bulb with the corresponding slots in the GX23-2 socket. Gently push the bulb straight into the socket until it is fully seated. Do not force the bulb.
- Restaurar l'energia: Un cop instal·lada la bombeta de manera segura, restableix l'alimentació de l'aparell des del disjuntor o la caixa de fusibles.
- Prova: Engegueu l'interruptor de la llum per assegurar-vos que la bombeta funciona correctament.
Si no esteu segurs de cap pas, consulteu un electricista qualificat.
6. Funcionament
The Philips 383133 fluorescent light bulb operates like a standard light bulb. Once installed in a compatible fixture with power supplied, it can be turned on and off using the fixture's switch.
- Posada en marxa inicial: Some fluorescent bulbs may take a few seconds to reach full brightness upon initial activation.
- Frequent Switching: Frequent switching (turning on and off rapidly) can reduce the lifespan of fluorescent bulbs.
7. Manteniment
- Neteja: Ensure the power is off and the bulb is cool before cleaning. Gently wipe the bulb with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials.
- Substitució: When the bulb reaches the end of its life or fails, follow the installation instructions in Section 5 to safely replace it. Remember to dispose of the old bulb properly.
8. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La bombeta no s'encén. | No power to the fixture, bulb not seated correctly, faulty bulb, faulty fixture. | Check power supply (circuit breaker/switch). Ensure bulb is fully inserted. Test with a known working bulb. Inspect fixture for damage. |
| La bombeta parpelleja. | Loose connection, incompatible dimmer, cold temperature, bulb nearing end of life. | Ensure bulb is securely seated. Do not use with incompatible dimmers. Allow bulb to warm up in cold environments. Replace bulb if it's old. |
| Lluentor reduït. | Dust accumulation, bulb nearing end of life. | Clean the bulb and fixture. Replace the bulb. |
9. Garantia i Suport
For warranty information and customer support regarding your Philips 383133 PL-C ALTO Fluorescent Light Bulb, please refer to the official Philips weblloc web o poseu-vos en contacte directament amb el servei d'atenció al client de Philips. Conserveu el rebut de compra com a comprovant de compra.
You can typically find support contact details on the product packaging or by visiting the official Philips weblloc: www.philips.com/support