RAB Lighting GT500 Motion Sensor Light Outdoor Instruction Manual

1. Informació important de seguretat

Please read these instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards, which could cause property damage, serious injury, or death.

• ADVERTÈNCIA: Risc de descàrrega elèctrica. Desconnecteu l'alimentació al fusible o al disjuntor abans d'instal·lar o fer el servei.
• La instal·lació ha de ser realitzada per un electricista qualificat d'acord amb tots els codis elèctrics nacionals i locals.
• Assegureu-vos el subministrament voltage is correct for the fixture (120V or 277V).
• No instal·leu a prop de materials combustibles.
• This device is designed for outdoor, wet-rated locations.
• Use only with PAR38 flood lamps up to 150W max.

2. Producte acabatview

The RAB Lighting GT500W is a hardwired outdoor motion sensor designed to provide reliable security lighting. It features a 110-degree detection range and is compatible with 120V and 277V systems, supporting up to 600W at 120V and 1350W at 277V. Its durable polycarbonate housing and 6000V surge protection ensure long-term performance in various weather conditions.

Figura 2.1: Frontal view of the RAB Lighting GT500 Motion Sensor Light.

Característiques principals:

• Detecció de moviment fiable: 110° coverage for dependable security.
• Dual Voltage Capacitat: Supports 120V and 277V installations.
• Heavy-Duty Surge Protection: Built with 6000V surge protection.
• Construcció duradora: Polycarbonate housing for wet-rated outdoor performance.
• Temps ajustable: Run time from 10 seconds to 15 minutes.
• Anulació manual: 6-hour protected manual override for continuous light.
• Lamp Compatibilitat: Designed for PAR38 flood lamps up to 150W max.

3. Instal·lació (Configuració)

Before beginning installation, ensure all power is disconnected at the circuit breaker or fuse box. This device is designed for wall mount installation.

3.1 Muntatge

1. Select a suitable mounting location, typically 8-15 feet above the ground, ensuring the sensor has an unobstructed view of the desired detection area.
2. Securely attach the sensor to a junction box using appropriate hardware (not included). Ensure a watertight seal for outdoor applications.

3.2 Cablejat

The GT500W sensor is hardwired and supports both 120V and 277V electrical systems. Refer to the wiring diagram below and consult a qualified electrician if unsure.

Figure 3.1: Wiring connections for the GT500W sensor. Black wire for Line, White for Neutral, Red for Load.

• Connecteu el NEGRE wire from the sensor to the LÍNIA (CALENT) cable de la font d'alimentació.
• Connecteu el BLANC wire from the sensor to the NEUTRE cable de la font d'alimentació.
• Connecteu el VERMELL wire from the sensor to the LOAD (fixture) filferro.
• Assegureu-vos que totes les connexions estiguin ben fixades i aïllades amb connectors de cable homologats.
• Resta l'alimentació al disjuntor.

4. Funcionament

The GT500W sensor automatically detects motion and activates connected lighting. It features adjustable settings for optimal performance.

4.1 Interval de detecció

The sensor provides a 110-degree field of view, detecting motion up to 70 feet away. The coverage area can be influenced by mounting height and environmental factors.

Figure 4.1: The 110-degree detection range of the GT500 sensor.

4.2 Ajustar la configuració

The sensor includes controls for adjusting the run time and sensitivity. These controls are typically located on the underside or side of the sensor unit.

Figura 4.2: Example of adjustable sensitivity control.

• Ajust de HORA: This dial controls how long the light remains on after motion is detected. Settings typically range from 10 seconds to 15 minutes. Turn the dial clockwise to increase the duration, counter-clockwise to decrease.
• SENSITIVITY Adjustment: This dial controls the sensor's responsiveness to motion. Turn the dial clockwise for higher sensitivity (detects smaller movements or at greater distances), and counter-clockwise for lower sensitivity (reduces false triggers).

4.3 Anulació manual

The GT500W features a 6-hour protected manual override function, allowing the light to stay on continuously regardless of motion detection.

• To activate manual override, quickly turn the light switch OFF and then ON within 2 seconds. The light will remain ON for approximately 6 hours.
• To deactivate manual override and return to motion-sensing mode, quickly turn the light switch OFF and then ON again. The light will then operate based on motion detection and set time.

5. Manteniment

The RAB Lighting GT500W motion sensor is designed for minimal maintenance.

• Neteja: Netegeu periòdicament la lent del sensor amb un drap suau i sec.amp cloth to remove dirt, dust, or debris that may obstruct detection. Do not use abrasive cleaners or solvents.
• Lamp Substitució: If the connected PAR38 flood lamps fail, ensure power is disconnected before replacing them. Follow the lamp instruccions del fabricant per a la seva substitució.

6. Solució De Problemes

If the motion sensor light is not functioning as expected, refer to the following common issues and solutions:

7. Especificacions

8. Garantia i Suport

8.1 Garantia del fabricant

The RAB Lighting GT500W Motion Sensor Light is covered by a Garantia del fabricant de 1 anys des de la data de compra. Aquesta garantia cobreix els defectes de materials i fabricació en condicions d'ús normal. No cobreix els danys resultants d'una instal·lació incorrecta, accidents, abús, mal ús o modificacions no autoritzades.

8.2 Atenció al client

For technical assistance, warranty claims, or further information, please contact RAB Lighting customer support:

• Weblloc: www.rablighting.com
• Telèfon: Refer to the RAB Lighting weblloc web per a números de contacte actuals.
• Correu electrònic: Refer to the RAB Lighting website for current contact email.

Please have your model number (GT500W) and proof of purchase available when contacting support.