PHILIPS PL-L 18W/830 4P 2G11 Compact Fluorescent Lamp Manual d'instruccions

Introducció

This manual provides essential information for the safe and effective use of your PHILIPS PL-L 18W/830 4P 2G11 Compact Fluorescent Lamp. Aquesta lamp is designed for commercial interior lighting applications, including 2'x2' fixtures, 1'x2' fixtures, and indirect lighting. Please read these instructions carefully before installation and operation.

Informació de seguretat

• Always turn off power to the fixture before installing or removing the lamp.
• Assegureu-vos que lamp is cool before handling.
• Do not use in dimmable fixtures unless explicitly stated as compatible.
• Handle with care to avoid breakage. Broken fluorescent lamps contain mercury and should be disposed of according to local regulations.
• Aquesta lamp is designed for indoor use in appropriate fixtures.

Producte acabatview

The PHILIPS PL-L 18W/830 4P 2G11 is an energy-efficient compact fluorescent lamp. It features a 4-pin 2G11 base and provides 3000 Kelvin white light with 1200 lumens of brightness.

Imatge 1: PHILIPS PL-L 18W/830 4P 2G11 Compact Fluorescent Lamp. This image shows the tubular lamp with its 4-pin base.

Configuració i instal·lació

1. Verificar la compatibilitat: Ensure your fixture is designed for a 4-pin 2G11 base compact fluorescent lamp and matches the lampés watage (18 W) i voltage (120 V).
2. Apagar: Before beginning installation, always turn off the power supply to the lighting fixture at the circuit breaker or fuse box.
3. Elimina la L antigaamp (si escau): Si es substitueix una l existentamp, allow it to cool completely. Gently grasp the old lamp and pull it straight out from the fixture's socket.
4. Insereix una nova Lamp: Align the four pins of the new PHILIPS PL-L 18W/830 lamp with the corresponding slots in the 2G11 socket. Gently push the lamp directament a la presa fins que estigui ben assentada. No forceu la lamp.
5. Restaura l'alimentació: Un cop lamp estigui instal·lat correctament, restableix l'alimentació a l'aparell.
6. Prova: Engegueu l'interruptor de la llum per confirmar el funcionament correcte.

Si la lamp does not light, ensure it is fully seated in the socket and that power is restored to the fixture.

Instruccions de funcionament

The PHILIPS PL-L 18W/830 4P 2G11 lamp operates immediately upon receiving power from a compatible fixture. No special operating procedures are required beyond standard light switch control.

• Ensure the fixture's ballast is compatible with 18W PL-L lamps.
• Avoid frequent on/off cycling, as this can reduce the lampla vida útil de.

Manteniment

Aquesta lamp requires minimal maintenance. Regular cleaning of the fixture and lamp can help maintain optimal light output.

• Neteja: Turn off and disconnect power to the fixture. Allow the lamp to cool. Gently wipe the lamp with a soft, dry, lint-free cloth. Do not use liquid cleaners directly on the lamp.
• Substitució: Substituïu la lamp when it reaches the end of its rated life (approximately 15,000 hours) or if it begins to flicker or fail. Follow the installation steps for replacement.

Resolució de problemes

Especificacions

Informació d'eliminació

Fluorescent compacte lamps contain a small amount of mercury. Due to environmental concerns, these lamps should not be disposed of in regular household trash. Please recycle them according to local, state, and federal regulations. Many retailers and local waste management facilities offer recycling programs for CFLs.

For more information on recycling CFLs, please visit EPA's CFL Recycling and Disposal page (example link, actual link might vary by region).

Suport i Contacte

For further assistance or inquiries regarding your PHILIPS PL-L 18W/830 4P 2G11 lamp, please contact Philips customer support or visit the official Philips weblloc.

• Oficial de Philips Weblloc: www.philips.com
• Refer to your product packaging for specific regional contact information.