Manual d'usuari del monitor de pressió arterial Beurer BM60

1. Introducció

Thank you for choosing the Beurer BM60 Upper Arm Blood Pressure Monitor. This device is designed for fully automatic, non-invasive measurement of arterial blood pressure and pulse rate on the upper arm. It features a patented resting indicator for precise results, a large LCD display, WHO classification, and arrhythmia detection. Please read this manual carefully before first use and keep it for future reference.

Característiques principals:

• Fully automatic blood pressure and pulse measurement on the upper arm.
• Patented resting indicator for accurate measurement results.
• Pantalla LCD gran i fàcil de llegir.
• WHO (World Health Organization) classification indicator.
• Arrhythmia detection.
• 2 user memory channels with 60 memory spaces each.
• Calculates average of all saved morning and evening measurements for the last 7 days.
• Funció d'apagat automàtic.
• Includes batteries and a storage bag.

2. Informació de seguretat

Please observe the following safety instructions to ensure safe and effective use of your blood pressure monitor:

• This device is intended for measuring human arterial blood pressure and pulse rate. It is not intended for use on children.
• Do not attempt to repair the device yourself. Any repairs must be performed by authorized service personnel.
• Consult your doctor before using the device if you have any medical conditions, especially if you have a pacemaker or other implanted devices.
• Do not use the device in areas with high electromagnetic fields, such as near mobile phones or microwave ovens, as this may affect accuracy.
• Measurements taken by yourself are for your information only. Do not alter the dosage of any medicines prescribed by your doctor based on self-measurements.
• Ensure the cuff is applied correctly and comfortably. Over-tightening can cause discomfort or injury.
• Mantingueu el dispositiu i els seus components fora de l'abast dels nens.

3. Producte acabatview

The Beurer BM60 Blood Pressure Monitor consists of the main unit and an upper arm cuff. Familiarize yourself with the components:

Figure 1: Beurer BM60 Blood Pressure Monitor main unit.

Figure 2: The BM60 monitor connected to its upper arm cuff.

Figura 3: Primer pla view of the M1, Power, and M2 buttons on the monitor.

Figure 4: The LCD display showing systolic, diastolic, pulse, and memory indicators.

4. Configuració

4.1 Instal·lació de la bateria

1. Obriu la tapa del compartiment de la bateria a la part posterior del dispositiu.
2. Insert four (4) AA 1.5V batteries, ensuring correct polarity (+/-).
3. Tanqueu bé la tapa del compartiment de la bateria.
4. The low battery indicator will appear on the display when batteries need replacement.

4.2 Connexió del maneguet

1. Insert the air tube connector from the cuff firmly into the port on the left side of the monitor unit.
2. Assegureu-vos que la connexió estigui ben fixada per evitar fuites d'aire durant la mesura.

4.3 Aplicació del puny

The standard cuff is suitable for upper arm circumferences of 23-35 cm. An optional XL cuff (30-42 cm) is available separately.

1. Place the cuff on your bare upper left arm, approximately 2-3 cm above the elbow joint. The air tube should run along the inside of your arm.
2. Ensure the cuff is snug but not too tight. You should be able to fit two fingers under the cuff.
3. The arrow on the cuff should point towards your hand.

Figure 5: Correct placement of the cuff on the upper arm.

Figure 6: Detail of the cuff showing the arm circumference guide (22-32cm in this example, actual cuff is 23-35cm).

5. Instruccions de funcionament

5.1 Abans de la mesura

• Descansa almenys 5 minuts abans de prendre una mesura.
• Avoid eating, drinking alcohol, smoking, or exercising for at least 30 minutes prior to measurement.
• Sit in a relaxed position with your back supported and feet flat on the floor. Your arm should be resting on a table so the cuff is at heart level.
• Romandre quiet i en silenci durant la mesura.

5.2 Prendre una mesura

1. Premeu el botó ON/OFF botó (I) to start the measurement.
2. The cuff will automatically inflate, and the measurement will begin.
3. During the measurement, the device will display a patented resting indicator. This indicates whether your circulatory system is sufficiently at rest for an accurate reading.
4. Once the measurement is complete, the systolic pressure, diastolic pressure, and pulse rate will be displayed on the LCD screen.
5. The results will also be classified according to WHO guidelines and checked for arrhythmia.
6. The device automatically stores the measurement in the selected user memory (M1 or M2).
7. The device will automatically switch off after approximately one minute of inactivity.

5.3 Funcions de memòria

The BM60 has two user memory channels (M1 and M2), each capable of storing 60 measurements.

• Seleccionant un usuari: Before starting a measurement, press the M1 or M2 botó per seleccionar el professional d'usuari desitjatfile.
• Viewing Stored Measurements: Amb el dispositiu apagat, premeu el botó M1 or M2 botó per view the stored measurements for that user. Repeated presses will cycle through the readings.
• 7-Day Average: The device can display an average of all saved morning and evening readings taken over the last 7 days for each user. Refer to the full user manual for specific instructions on accessing this feature.

6. Manteniment

6.1 Neteja

• Clean the monitor unit and cuff with a slightly damp tela. No utilitzeu netejadors abrasius ni submergiu el dispositiu en aigua.
• No rentar el puny.

6.2 Emmagatzematge

• Guardeu el dispositiu a la bossa d'emmagatzematge proporcionada quan no l'utilitzeu.
• Mantingueu el dispositiu en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
• Traieu les bateries si el dispositiu no s'utilitzarà durant un període prolongat.

Figure 7: The cuff can be rolled up for compact storage in the included bag.

7. Solució De Problemes

If you encounter issues with your Beurer BM60, refer to the table below for common problems and solutions:

If the problem persists, contact Beurer customer support or your local service center.

8. Especificacions

9. Garantia i Suport

9.1 Garantia

The Beurer BM60 Blood Pressure Monitor comes with a 1-year manufacturer's warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.

9.2 Atenció al client

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Beurer customer support. Contact information can typically be found on the Beurer official weblloc web o a l'embalatge del producte.