Introducció
This manual provides essential information for the safe and effective use, maintenance, and care of your Knipex 83 10 010 90 Degree Pipe Wrench. Please read these instructions thoroughly before operating the tool to ensure proper function and longevity.
Producte acabatview i Característiques
The Knipex 83 10 010 is a robust pipe wrench designed for gripping and turning pipes and fittings. It features a Swedish pattern with 90-degree angled jaws, allowing for efficient work in various positions. The jaws are equipped with offset teeth in opposite directions to provide a secure grip, and the teeth are induction hardened for enhanced durability and wear resistance.
- Swedish Pattern: Optimized design for strong grip.
- 90 Degree Angled Jaws: Facilitates access and leverage in confined spaces.
- Offset Teeth: Ensures a firm, non-slip hold on workpieces.
- Induction Hardened Teeth: Provides long-lasting sharpness and resistance to wear.
- Construcció duradora: Made from Chrome Vanadium Steel for reliability.
Imatge: Superior view of the Knipex 83 10 010 pipe wrench, showcasing its overall design and red finish.
Imatge: Anglesa view of the Knipex 83 10 010 pipe wrench, highlighting the jaw structure.
Configuració
The Knipex 83 10 010 pipe wrench is a hand-operated tool that requires no complex setup. Before first use, and periodically thereafter, inspect the tool for any signs of damage, wear, or loose components. Ensure the jaws move freely and the adjustment mechanism operates smoothly. Clean any manufacturing residues or protective coatings if present.
Instruccions de funcionament
Follow these steps for safe and effective operation of your pipe wrench:
- La seguretat primer: Always wear appropriate personal protective equipment, including safety glasses and gloves, when using hand tools.
- Seleccioneu la mida correcta: Ensure the pipe wrench is appropriately sized for the workpiece. The Knipex 83 10 010 has a maximum jaw capacity of 42 mm.
- Ajustar les mandíbules: Rotate the adjustment nut to open or close the jaws. Position the jaws around the pipe or fitting, ensuring a snug fit. The 90-degree angled jaws are designed to provide maximum contact.
- Adherència segura: Apply pressure to the handle to engage the offset teeth firmly onto the workpiece. The teeth are designed to grip in opposite directions for a secure hold.
- Aplicar força: Apply steady, controlled force in the desired direction (tightening or loosening). Avoid excessive force that could damage the workpiece or the tool.
- Reposició si cal: If the wrench slips or the grip is lost, reposition the jaws and re-engage.
Image: Close-up demonstrating the wrench jaws securely gripping a round pipe.
Image: Detail of the adjustment nut, used to set the jaw opening for different pipe sizes.
Image: The wrench jaws gripping a square workpiece, illustrating versatility.
Image: The wrench jaws gripping a hexagonal workpiece, demonstrating adaptability to various shapes.
Manteniment
Proper maintenance ensures the longevity and performance of your Knipex pipe wrench:
- Neteja: After each use, clean the wrench to remove dirt, grease, and debris. A stiff brush and a clean cloth are usually sufficient.
- Lubricació: Apliqueu periòdicament una capa lleugera d'oli per a màquines als punts de pivot i al mecanisme d'ajust per garantir un funcionament suau i evitar l'oxidació.
- Emmagatzematge: Store the wrench in a dry environment to prevent corrosion. Keep it away from corrosive chemicals.
- Inspecció: Regularly inspect the jaws for wear or damage. Worn teeth can reduce grip effectiveness. If significant wear is observed, consider replacing the tool.
Resolució de problemes
Most issues with a pipe wrench are related to improper use or wear. Here are common scenarios and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Wrench slips on workpiece | Jaws not properly adjusted; Worn teeth; Workpiece is oily/greasy | Ensure jaws are snug; Inspect teeth for wear; Clean workpiece surface |
| Adjustment mechanism is stiff | Lack of lubrication; Dirt/debris in threads | Clean and lubricate the adjustment nut and threads |
| Formació d'òxid | Exposure to moisture; Improper storage | Clean rust with a wire brush, apply rust preventative oil, store in a dry place |
Especificacions
| Especificació | Detall |
|---|---|
| Número de model | 83 10 010 |
| Marca | KNIPEX |
| Material | Acer al crom vanadi |
| Longitud de l'element | 310 mm |
| Pes de l'article | 1.32 lliures (aprox. 0.6 kg) |
| Jaw Capacity (Spannweite) | 42 mm |
| Estil del cap | Wrench, 90° Angled Jaws |
| Tipus d'acabat | Recobert de pols |
| Mode d'operació | Accionament manual |
| Nombre de peces | 1 |
| Sistema de mesura | mètrica |
Garantia i Suport
Knipex tools are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the official Knipex website or contact your authorized Knipex dealer. Keep your purchase receipt as proof of purchase.
For technical support or inquiries, please visit the KNIPEX Store on Amazon o consulteu la informació de contacte que s'inclou amb l'embalatge del producte.