Permatex 80328 Weatherstrip Cement User Manual

Introducció

The Permatex 80328 Weatherstrip Cement is a specialized adhesive designed to create a durable, watertight seal between automotive weatherstripping and vehicle surfaces. This cement is formulated to resist cracking and peeling, providing a long-lasting bond against drafts and moisture. It is suitable for bonding metal, glass, and rubber components.

Informació de seguretat

WARNING: EXTREMELY FLAMMABLE. HARMFUL OR FATAL IF SWALLOWED. VAPOR HARMFUL.

• Use in a well-ventilated area. Avoid breathing vapors.
• Mantenir allunyat de la calor, espurnes, flames obertes i superfícies calentes. No fumar.
• Utilitzeu equips de protecció individual adequats, inclosos guants i protecció ocular.
• Do not ingest. If swallowed, call a Poison Control Center or doctor immediately. Do not induce vomiting.
• In case of contact with eyes, rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• Mantenir fora de l'abast dels nens.
• Store in a cool, dry place. Keep container tightly closed.

Muntatge i preparació

1. Superfícies netes: Ensure all surfaces to be bonded are clean, dry, and free of grease, oil, dirt, or old adhesive residue. Use a suitable cleaner if necessary and allow to dry completely.
2. Temperatura: For best results, apply the cement at room temperature (between 60°F and 80°F / 15°C and 27°C).
3. Ventilació: Work in a well-ventilated area to minimize exposure to vapors.
4. Prova d'ajust: Before applying adhesive, test fit the weatherstrip to ensure proper alignment and fit.

Instruccions d'ús (aplicació)

Follow these steps for effective application of Permatex 80328 Weatherstrip Cement:

1. Prepare the Tube: Remove the cap and, if sealed, puncture the tube's seal.
2. Apply Cement: Apply a thin, even coat of Permatex Weatherstrip Cement to one of the surfaces to be bonded (e.g., the weatherstrip or the vehicle body). The squeeze bottle applicator allows for quick and easy application.
3. Wait for Tackiness: Allow the cement to become slightly tacky, typically within 1-2 minutes, before joining the surfaces. This allows some solvents to evaporate, improving bond strength.
4. Unir superfícies: Carefully position the weatherstrip onto the prepared surface. Press firmly and evenly along the entire length to ensure good contact.
5. Segur al lloc: If necessary, use clamps or tape to hold the weatherstrip in place while the cement cures.
6. Temps de curat: Allow the cement to cure completely before exposing it to moisture or stress. Full cure time may vary depending on temperature and humidity, but typically takes 24 hours. Refer to product packaging for specific cure times.
7. Clean Excess: Immediately wipe away any excess cement with a clean cloth dampened with mineral spirits or a suitable adhesive remover before it dries.

Image: Permatex 80328 Weatherstrip Cement in its retail packaging. The image displays the product tube and highlights key features such as flexibility, toughness, waterproofing, and bonding capabilities for metal, glass, and rubber.

Manteniment i emmagatzematge

• Tapa fermament: After each use, ensure the cap is securely replaced on the tube to prevent the cement from drying out.
• Emmagatzematge: Store the Permatex 80328 Weatherstrip Cement in a cool, dry place, away from direct sunlight and sources of ignition.
• Vida útil: For optimal performance, use the product within its recommended shelf life. Check the packaging for any expiration dates.
• Clean Applicator: If the applicator tip becomes clogged, clear it with a small wire or pin before attempting to use the product again.

Resolució de problemes

Especificacions

• Nom del producte: Permatex Weatherstrip Cement
• Número de model: 80328
• Marca: Permatex
• Formulari de l'article: Liquid / Cement
• Pes net: 2.0 fl. oz. (59 ml) / 0.17 Pounds (approx. 2.72 ounces)
• Recomanació de superfície: Window (suitable for metal, glass, rubber)
• Característiques principals: Flexible, Tough, Waterproof, Bonds Metal, Glass, Rubber
• UPC: 079340803282
• Número de peça del fabricant: 80328
• ASIN: B004BT6RL2

Garantia i Suport

Permatex products are manufactured to high-quality standards. For specific warranty information or technical support regarding your Permatex 80328 Weatherstrip Cement, please refer to the official Permatex weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el rebut de compra per a qualsevol reclamació de garantia.

You can visit the official Permatex store for more information: Permatex Store on Amazon