Introducció
The Andis Pet No.4SE Blade Set is a high-quality, chrome-plated, carbon-steel detachable blade designed for professional and home pet grooming. This blade is engineered with SHOWEdge technology to provide a smooth finish on a pet's coat, reducing the need for multiple passes. It leaves hair at a length of 3/8 inch (9.5mm).
Figura 1: Andis Pet No.4SE Blade Set. This image displays the complete blade set, highlighting its design and finish.
Característiques clau
- Material: Chrome-plated, carbon-steel construction for durability and sharpness.
- Mida de la fulla: No.4SE, designed to leave hair 3/8 inch (9.5mm) long.
- Tecnologia: Features SHOWEdge technology for an exceptionally smooth finish, minimizing blade tracks.
- Compatibilitat: Compatible with all Andis detachable blade clippers.
Configuració i instal·lació
Proper installation of the blade is crucial for safe and effective grooming. Follow these steps to attach the No.4SE blade to your Andis detachable blade clipper:
- Garantir la seguretat: Always ensure your clipper is turned OFF i DESCONECTAT from the power source before attaching or detaching any blade.
- Clean Clipper Drive: Inspect the clipper's blade drive for any hair or debris. Clean if necessary.
- Alinear la fulla: Hold the blade with the teeth facing away from you. Align the blade's hinge with the hinge on the clipper.
- Encaixa al seu lloc: Gently push the blade down until it snaps securely into position. You should hear a click.
- Verificar fitxer adjunt: Lightly tug on the blade to ensure it is firmly attached and does not wobble.
Figura 2: Detallada view of the Andis No.4SE blade, showing its size and construction. This image helps in identifying the blade and understanding its physical characteristics.
Instruccions de funcionament
For optimal performance and to ensure the comfort of the animal, follow these operating guidelines:
- Preparació: Always start with a clean, dry, and thoroughly detangled coat. Matted or dirty hair can dull blades quickly and cause discomfort.
- Lubricació: Before each use, apply a few drops of clipper oil to the teeth and bearing surfaces of the blade. This reduces friction, heat, and wear.
- Tècnica de retall: Hold the clipper firmly and guide it smoothly through the coat, moving against the direction of hair growth for a consistent cut. Avoid pressing too hard.
- Monitor de calor: Blades can heat up during prolonged use. Periodically check the blade temperature by touching it. If it becomes too hot, stop grooming, clean and re-oil the blade, or switch to a cool blade. Blade coolants can also be used.
- Pauses habituals: For longer grooming sessions, take breaks to allow the clipper and blade to cool down.
Manteniment
Proper maintenance extends the life of your blade and ensures consistent performance.
- Neteja després de cada ús:
- Apagueu i desconnecteu la talladora de llavis.
- Despreneu la fulla.
- Use a small brush to remove all hair from between the blade teeth and from the blade drive area.
- For a deeper clean, use a blade wash solution to remove oil and debris. Ensure the blade is thoroughly dried immediately after using blade wash to prevent rust.
- Lubricació: Apply 2-3 drops of clipper oil to the front and sides of the blade teeth, and 1-2 drops on the back rail where the blade glides. Do this before, during (if needed), and after each grooming session.
- Emmagatzematge: Store blades in a clean, dry place, preferably in a blade case, to protect them from damage and moisture.
- Afilat: Over time, blades will become dull. For best results, have your blades professionally sharpened by a reputable service. Do not attempt to sharpen blades yourself unless you have specialized tools and training.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Blade gets excessively hot | Insufficient oiling, hair buildup, prolonged use, dull blade. | Apply more clipper oil. Clean blade thoroughly. Use blade coolant. Take breaks. Consider sharpening or replacing the blade. |
| Blade is not cutting hair effectively | Dull blade, hair buildup, improper oiling, matted coat. | Clean and oil the blade. Ensure the pet's coat is clean and detangled. Have the blade professionally sharpened or replace it. |
| Blade leaves tracks or uneven cut | Improper technique, dull blade, hair buildup. | Review operating instructions for proper technique. Clean and oil blade. Sharpen or replace if dull. |
| Blade shows signs of rust | Improper drying after cleaning, exposure to moisture, insufficient oiling. | Ensure blades are completely dry after cleaning. Apply clipper oil regularly, especially after exposure to moisture. Store in a dry environment. |
Especificacions
| Número de model | 65590 |
| Mida de la fulla | No.4SE (Leaves hair 3/8" or 9.5mm) |
| Material | Chrome-plated Carbon Steel |
| Dimensions del producte | 3.5 x 1.25 x 4.75 polzades |
| Pes de l'article | 3.2 unces |
| UPC | 040102655906 |
| Ús recomanat | Pet Grooming (Clipping) |
Informació de la garantia
For detailed warranty information regarding your Andis Pet No.4SE Blade Set, please refer to the official Andis website or contact Andis customer service directly. Warranty terms and conditions may vary.
Atenció al client
If you have any questions, require assistance, or need further information about your Andis Pet No.4SE Blade Set, please visit the official Andis weblloc o poseu-vos en contacte amb el seu equip d'atenció al client.
Andis Official Weblloc: www.andis.com