Nikon 4809

Nikon SB-910 Speedlight Flash User Manual

Model: 4809

Introducció

The Nikon SB-910 is a sophisticated and powerful Creative Lighting System portable Speedlight designed for use on camera and for complete wireless control in studio or on location. Engineered for both FX and DX-format D-SLRs, it offers unparalleled lighting performance. This manual provides essential information for setting up, operating, and maintaining your SB-910 Speedlight.

Què hi ha a la caixa

Nikon SB-910 Speedlight Flash Unit
Estoig suau
Hard Type Color Filters (Fluorescent and Tungsten)
Speedlight Stand

Configuració

Instal·lació de la bateria

The SB-910 requires 4 AA batteries (not included). Open the battery compartment cover located on the side of the Speedlight. Insert the batteries according to the polarity indicators (+/-) inside the compartment. Close the cover securely.

Muntatge a la càmera

Slide the Speedlight's mounting foot into your camera's hot shoe. Ensure it is fully seated, then turn the locking lever clockwise to secure the Speedlight in place. To remove, turn the locking lever counter-clockwise and slide the Speedlight off.

Nikon SB-910 Speedlight Flash mounted on a camera

The Nikon SB-910 Speedlight Flash, ready for use.

Operating the Speedlight

S'ha acabat la interfície d'usuariview

The SB-910 features an improved interface with a dedicated Menu button and illuminated buttons for ease of use in low light conditions. The large LCD panel displays current settings, including ISO, aperture, and zoom position.

Enrere view of Nikon SB-910 Speedlight showing LCD and control buttons

Detallada view of the SB-910's user interface and controls.

i-TTL Flash Control

Nikon's i-TTL (intelligent through-the-lens) metering system ensures consistently accurate flash exposures by sharing critical exposure information with CLS compatible D-SLRs. This system automatically calculates complex lighting requirements for optimal results.

Control de flaix sense fil

The SB-910 can operate as a remote unit or a wireless Commander. As a Commander, it can control up to three remote groups (A, B, and C) and an unlimited number of compatible Speedlight units (SB-910, SB-900, SB-700, or SB-R200). Each group can contain any number and mix of these Speedlights.

Patrons d'il·luminació

Choose from three illumination patterns: Standard, Even, and Center-weighted, to suit specific shooting environments and achieve desired light distribution.

Auto Power Zoom

The Speedlight features an expanded auto power zoom range from 17-200mm, automatically adjusting the flash coverage to match the lens's focal length.

Manteniment

Neteja

To clean the Speedlight, gently wipe the exterior with a soft, dry cloth. For stubborn dirt, use a cloth lightly dampened with water. Do not use organic solvents such as paint thinner or benzene. Keep the flash head and sensor window clean for optimal performance.

Emmagatzematge

When not in use for extended periods, remove the batteries to prevent leakage. Store the Speedlight in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided soft case for protection during storage and transport.

Resolució de problemes

Problema	Causa possible	Solució
Speedlight overheats and stops firing.	Rapid, continuous firing.	The SB-910 has improved thermal cut-out protection that slows recycling instead of cutting off the flash. Allow the unit to cool down. Reduce the frequency of flashes.
El flaix no es dispara.	Batteries are low or incorrectly inserted. Unit is not securely mounted. Power switch is off.	Replace batteries or ensure correct polarity. Re-mount the Speedlight securely. Turn the power switch to ON.
Photos are too dark or too bright.	Incorrect flash mode or exposure compensation. Subject is out of range.	Check flash mode (e.g., i-TTL, Manual). Adjust flash exposure compensation. Ensure subject is within the flash's effective range.

Especificacions

Característica	Detall
Dimensions del producte	1 x 1 x 1 polzades
Pes de l'article	1 lliures
Número de model de l'article	4809
Piles necessàries	1 Product Specific batteries (typically 4x AA)
Muntatges compatibles	Nikon
Durada de la bateria	12 Hours (approximate, varies with usage)
Tipus de flaix de la càmera	Extern
Velocitat de sincronització del flaix	1/250 s
Fabricant	Nikon
País d'origen	Tailàndia

Garantia i Suport

This product comes with a FULL 14 DAY SATISFACTION GUARANTEE and a FULL 90 DAY PARTS AND LABOR WARRANTY. AA BATTERIES ARE NOT INCLUDED.

For further assistance or detailed information, please refer to the official User Manual PDF available online or contact Nikon customer support.

Manual d'usuari oficial (PDF): Descarrega aquí

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.