Somfy Sunis Indoor Wirefree RTS Sun Sensor (9013707) Instruction Manual

Introducció

The Somfy Sunis Indoor Wirefree RTS Sun Sensor is designed to automate motorized window coverings based on the intensity of sunlight. This device helps manage natural light and temperature within a room by automatically adjusting window coverings. This manual provides detailed instructions for installation, operation, and maintenance of your Sunis sensor.

Informació de seguretat

• Llegiu atentament totes les instruccions abans de la instal·lació i l'ús.
• Mantingueu el dispositiu allunyat de la humitat i de les temperatures extremes.
• No intenteu obrir ni reparar el dispositiu vosaltres mateixos. Encarregueu totes les tasques de manteniment a personal qualificat.
• Assegureu-vos que la bateria estigui inserida correctament segons les marques de polaritat.

Producte acabatview

The Sunis Indoor Wirefree RTS Sun Sensor is a compact device featuring an integrated sun sensor and controls for programming and sensitivity adjustment.

Configuració

1. Instal·lació

The Sunis sensor offers flexible installation options to suit your window environment.

• Window Sill Mount: Place the sensor directly on the window sill, ensuring it has a clear view del sol.
• Window Glass Mount: Use the provided suction cup to attach the sensor directly to the window glass. Ensure the glass surface is clean and dry for secure adhesion.

Position the sensor where it receives direct sunlight for optimal performance. Avoid placing it behind curtains or obstructions that would block sunlight.

2. Instal·lació de la bateria

The Sunis sensor is wirefree and operates on batteries. To install or replace batteries:

1. Traieu amb cura la coberta posterior del sensor.
2. Insert the required batteries (refer to product specifications for battery type) ensuring correct polarity.
3. Col·loqueu la coberta posterior de manera segura.

3. Programming with RTS Motorized Window Coverings

To link the Sunis sensor with your Somfy RTS motorized window coverings:

1. Ensure your window covering motor is powered and functioning.
2. On your existing RTS remote control for the window covering, press and hold the programming button (usually a small button on the back) until the window covering jogs (moves slightly up and down).
3. Within 2 minutes, press the 'PROG' button on the back of the Sunis sensor (with the cover removed). The window covering will jog again, confirming successful pairing.
4. Repeat this process for all window coverings you wish to control with this sensor.

Operating the Sunis Sensor

1. Interruptor d'encesa/apagada

The sensor features a convenient ON/OFF switch on the front. Slide the switch to the 'ON' position (sun icon) to activate sun detection and automatic operation. Slide it to 'OFF' to disable the sun sensor function.

2. Adjusting Sun Sensitivity

The sun sensitivity level determines the amount of sunlight required to trigger the automatic movement of your window coverings. To adjust:

1. Remove the back cover to access the controls.
2. Locate the adjustable sun sensitivity dial (marked with '+' and '-' symbols).
3. Turn the dial towards '+' for higher sensitivity (window coverings will react to less intense sunlight).
4. Turn the dial towards '-' for lower sensitivity (window coverings will require more intense sunlight to react).
5. Test the setting by exposing the sensor to varying light conditions.

3. Operating Mode Button

The 'MODE' button on the back of the sensor (under the cover) allows you to select the desired operating mode. Consult your specific window covering motor's manual for details on compatible modes and their functions. Typically, this button cycles through options like 'Open on Sun' or 'Close on Sun'.

Manteniment

1. Neteja

To ensure accurate sun detection, keep the sensor's surface clean. Use a soft, dry cloth to gently wipe away dust or smudges. Do not use abrasive cleaners or solvents.

2. Substitució de la bateria

When the battery level is low, the L.E.D. indicator on the sensor may flash or the device may stop responding. Replace the batteries as described in the 'Battery Installation' section under Setup. Always use fresh batteries of the specified type.

Resolució de problemes

• Sensor not responding: Check if the sensor is switched 'ON'. Verify battery charge and replace if necessary. Ensure the sensor is within range of the motorized window covering.
• Window covering not reacting to sun: Check the sun sensitivity setting. Increase sensitivity if needed. Ensure the sensor has a clear view of the sun and is not obstructed. Re-program the sensor to the window covering if the link was lost.
• Inconsistent operation: Ensure the sensor is placed in a stable location and not subject to movement. Verify that no external factors (e.g., shadows from trees, reflections) are interfering with sun detection.

Especificacions

Garantia

This Somfy product is covered by a 5-year warranty. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official Somfy weblloc o contacteu amb el servei d'atenció al client.

Suport

For further assistance, technical support, or to inquire about replacement parts, please visit the official Somfy website or contact their customer service department. Contact information can typically be found on the Somfy weblloc o embalatge del producte.

Weblloc: www.somfy.com