Williams AV EAR 008

Williams AV EAR 008 Single Over-Ear Hook Headphone User Manual

Model: EAR 008

Introducció

The Williams AV EAR 008 is a single over-ear hook headphone designed for clear audio reception. It is particularly suitable for individuals with mild to moderate hearing loss and is recommended for use with FM receivers and select IR receivers. This manual provides essential information for the proper setup, operation, and maintenance of your EAR 008 headphone.

Williams AV EAR 008 Single Over-Ear Hook Headphone

Image of the Williams AV EAR 008 Single Over-Ear Hook Headphone, showing its over-ear design and 3.5mm mono plug.

Configuració

  1. Unpack the Headphone: Carefully remove the EAR 008 headphone from its packaging.
  2. Identify the Audio Plug: The headphone features a 3.5mm mono plug at the end of its 1-meter cord.
  3. Connecta't al dispositiu: Insert the 3.5mm mono plug into the corresponding audio output jack of your compatible device, such as an FM receiver, IR receiver, or any device with a 3.5mm audio input jack. Ensure the plug is fully inserted for a secure connection.
  4. Position on Ear: Gently place the over-ear hook of the headphone over one ear. Adjust for comfort and optimal sound delivery. The headphone is designed to hang on the outside of the ear.

Instruccions de funcionament

  1. Encendre el dispositiu: Ensure your audio source device (e.g., FM receiver) is powered on and transmitting audio.
  2. Ajustar el volum: Use the volume controls on your connected audio source device to set the desired listening level. The EAR 008 headphone does not have integrated volume controls.
  3. Escolta: Once connected and volume is adjusted, audio will be delivered through the single earpiece.

Manteniment

  • Neteja: To clean the headphone, gently wipe the plastic and rubber surfaces with a soft, dry, or slightly damp tela. No utilitzeu productes químics aggressivs ni netejadors abrasius.
  • Exposició a l'aigua: The EAR 008 headphone is no resistent a l'aigua. Avoid exposing it to water, moisture, or excessive humidity to prevent damage.
  • Emmagatzematge: When not in use, store the headphone in a clean, dry place away from direct sunlight and extreme temperatures. Avoid tangling the cord.
  • Cura del cordó: Do not pull on the cord to disconnect the headphone. Always grasp the plug itself.

Resolució de problemes

ProblemaCausa possibleSolució
Sense so
  • Headphone not properly connected.
  • Audio source device is off or muted.
  • Volume on audio source device is too low.
  • Ensure the 3.5mm plug is fully inserted into the audio jack.
  • Check if the audio source device is powered on and not muted.
  • Augmenta el volum del dispositiu font d'àudio.
So baix o distorsionat
  • Volume on audio source device is too low.
  • Mala connexió.
  • Problema amb el dispositiu font d'àudio.
  • Augmenta el volum del dispositiu font d'àudio.
  • Ensure the 3.5mm plug is securely connected.
  • Test the headphone with another compatible audio source device to rule out a device issue.

Especificacions

  • Model: EAR 008
  • Connectivitat: Amb cable
  • Tipus d'endoll: Mono de 3.5 mm
  • Longitud del cable: 1 metre
  • Impedància: 32 ohms
  • Interval de freqüència: 20 Hz - 20 kHz
  • Mida del controlador d'àudio: 23 mil·límetres
  • Forma de l'auricular: Over-Ear Hook
  • Material: Plàstic, cautxú
  • Resistència a l'aigua: No resistent a l'aigua
  • Dimensions del producte: 4.2 x 2.3 x 0.2 polzades
  • Pes de l'article: 0.05 lliures
  • Ús recomanat: FM receivers and select IR receivers

Garantia i Suport

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Williams AV directly through their official weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.

Fabricant: Williams Sound (Williams AV)

© 2023 Williams AV. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.