Introducció
This manual provides essential information for the safe and effective operation of your Cen-Tech 9 Volt Metal Detector 6-inch Wand Scanner. This device is designed to locate metal objects, particularly those embedded in wood, and can also serve as a security scanning tool. Please read this manual thoroughly before use and retain it for future reference.
Image: The Cen-Tech 9 Volt Metal Detector, a black handheld wand with yellow "CEN-TECH" branding.
Informació de seguretat
- Feu servir sempre el dispositiu de manera segura.
- No exposeu el dispositiu a temperatures o humitat extremes.
- Mantenir fora de l'abast dels nens.
- Eliminar les bateries correctament d'acord amb la normativa local.
- Do not attempt to modify or repair the device yourself. Refer to qualified service personnel.
Contingut del paquet
- Cen-Tech 9 Volt Metal Detector Wand Scanner
- Estoig d'emmagatzematge
- Manual d'usuari (aquest document)
Note: A 9V battery is required for operation and is sold separately.
Configuració: Instal·lació de la bateria
The Cen-Tech Metal Detector requires one 9-volt battery for operation.
- Locate the battery compartment cover, typically on the handle or rear of the device.
- Feu lliscar o desenganxeu la tapa per obrir el compartiment.
- Insert a fresh 9-volt battery, ensuring the positive (+) and negative (-) terminals align correctly with the connectors inside the compartment.
- Col·loqueu la coberta del compartiment de la bateria amb seguretat.
- El dispositiu ja està llest per al seu ús.
Instruccions de funcionament
Encès/Apagat
- Per engegar el detector ON, slide the power switch to the "ON" position. You may hear a brief beep and see an LED light up, indicating it is active.
- Per engegar el detector OFF, slide the power switch to the "OFF" position.
Detecting Metal
- Hold the wand scanner by the handle and sweep the 6-inch wand head slowly and steadily over the area you wish to scan.
- When metal is detected, the device will emit an audio alarm (a distinct beeping sound) and/or activate the LED visual alert (a flashing light). The intensity of the alarm may increase as you get closer to the metal object.
- Pinpoint the exact location by narrowing your sweep area once an alarm is triggered.
Reducció de la sensibilitat
- The detector features a 50% sensitivity reduction button. Press and hold this button to temporarily decrease the sensitivity of the detector. This is useful for scanning in areas with high levels of ambient metal or when trying to ignore smaller, less significant metal objects.
- Release the button to return to full sensitivity.
Alerta de bateria baixa
- The device is equipped with a low battery alert. When the battery power is low, the detector's performance may diminish, and a specific indicator (e.g., a continuous low tone or a specific LED pattern) will activate.
- Replace the 9-volt battery immediately when the low battery alert is active to ensure optimal performance.
Característiques
- Detects metal embedded in wood.
- May also be used as a security scan device.
- 6-inch wand for one-pass coverage.
- Audio alarm and LED visual alert.
- 50% sensitivity reduction button.
- Alerta de bateria baixa.
- Comes with a handy carrying case.
Manteniment
- Neteja: Wipe the detector with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Emmagatzematge: When not in use, store the detector in its provided carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
- Bateria: Traieu la bateria si no heu d'utilitzar el dispositiu durant un període prolongat per evitar fuites i danys.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El detector no s'encén. | La bateria està morta o mal instal·lada. | Comproveu la polaritat de la bateria. Substituïu-la per una bateria nova de 9 V. |
| Weak or inconsistent detection. | Low battery. Interference from other electronic devices. | Replace battery. Move away from other electronics. Ensure sensitivity reduction button is not pressed. |
| Constant alarm without metal present. | High ambient metal. Device too close to metal objects during power-on. | Move to an area free of metal to power on. Use the sensitivity reduction button. |
| No audio or LED alert. | Battery issue. Internal malfunction. | Check/replace battery. If problem persists, contact customer support. |
Especificacions
| Marca | Cen-Tech |
| Número de model | 94138 |
| Font d'alimentació | Pila de 9V (no inclosa) |
| Tipus de detecció | Metall |
| Wand Size | 6 polzades |
| Alertes | Audio Alarm, LED Visual Alert, Low Battery Alert |
| Característiques especials | 50% Sensitivity Reduction Button |
| Dimensions | 16.5 x 5 x 2 polzades |
| Pes de l'article | 1.45 lliures |
| Material | Wood, Metal (referring to detected materials) |
| Classificació de protecció internacional | IP54 |
Garantia i Suport
Cen-Tech products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please refer to the warranty card included with your purchase or visit the official Cen-Tech weblloc web. Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.
For further assistance, you may contact Cen-Tech customer service through their official channels. Always provide your product model number (94138) when seeking support.
