1. Informació important de seguretat
Before using the SportPlus Crosstrainer SP-ET-9700-E, please read and understand all instructions in this manual. Retain this manual for future reference. Failure to follow these instructions may result in injury or damage to the equipment.
- Consulteu un metge abans de començar qualsevol programa d'exercici.
- Mantingueu els nens i les mascotes lluny de l'equip durant l'ús.
- Place the crosstrainer on a flat, stable surface with adequate clearance around it.
- Inspeccioneu l'equip per detectar peces soltes o desgastades abans de cada ús. No l'utilitzeu si està danyat.
- Porteu roba i calçat esportiu adequats.
- The maximum user weight for this crosstrainer is 130 kg (286 lbs).
- Deixa de fer exercici immediatament si et sents dèbil, marejat o tens dolor.
- Aquest equip només és per a ús domèstic.
2. Muntatge i muntatge
Unpack all components and ensure all parts are present before beginning assembly. It is recommended to have two people for assembly. Tools required: adjustable wrench, Phillips head screwdriver (not included; the provided tools are basic and may not offer sufficient torque).
- Base Stabilizers: Attach the front and rear stabilizer bars to the main frame using the provided bolts and washers. Ensure they are securely tightened.
- Main Frame Upright: Connect the main upright post to the base frame. Carefully route any console cables through the post before securing it with bolts.
- Pedal Arms and Handlebars: Attach the pedal arms to the crank assembly and the moving handlebars to the upright post. Pay attention to left and right markings. Connect the linkage rods between the pedal arms and handlebars.
- Console Post and Console: Mount the console post to the main upright. Connect the sensor cables from the main frame to the console. Secure the console onto its bracket.
- Comprovació final: Verify all bolts and nuts are tightened. Ensure all moving parts operate smoothly without obstruction.
Figure 2.1: Assembled SportPlus Crosstrainer SP-ET-9700-E, showing the overall structure.
Figure 2.2: Detail of the base stabilizer with adjustable feet for leveling.
3. Instruccions de funcionament
The SportPlus Crosstrainer SP-ET-9700-E features an intuitive console to monitor your workout and select programs. Ensure the power adapter is connected to a wall outlet and the crosstrainer.
Figura 3.1: Primer pla view de la pantalla de la consola i els botons de control.
3.1 Console Functions
- Visualització: Shows various workout data including Speed (SPD), Distance (DIST), Time (TIME), Calories (CAL), and Pulse (PULSE). The display also indicates selected programs (P1-P12).
- Botó MODE: Press to cycle through different display modes or to confirm selections in setup.
- RECOVERY Button: Used to activate the recovery pulse function after your workout.
- ST/SP (Start/Stop) Button: Starts or stops your workout program.
- Botons UP/DOWN: Adjust resistance levels, program settings, or navigate menus.
- Botó ENTER: Confirms selections or enters settings.
3.2 Començar un entrenament
- Step onto the foot pedals. Hold the stationary or moving handlebars.
- Premeu el botó MODE button to select your desired workout program (P1-P12) or manual mode.
- Utilitza el Amunt/Avall buttons to adjust settings such as time, distance, or resistance level if in manual mode.
- Premeu el botó ST/SP button to begin your workout.
- During your workout, the display will cycle through various metrics. To measure your pulse, grip the pulse sensors on the handlebars.
4. Manteniment
Regular maintenance ensures the longevity and safe operation of your SportPlus Crosstrainer.
- Neteja: Wipe down the crosstrainer with a damp drap després de cada ús per eliminar la suor i la pols. Eviteu productes de neteja abrasius.
- Lubricació: Periodically apply a silicone-based lubricant to moving joints and pivot points to prevent squeaking and ensure smooth operation. Do not over-lubricate.
- Apretament: Regularly check and tighten all bolts, nuts, and screws, especially those connecting the main frame, pedal arms, and handlebars. Loose connections can cause noise and instability.
- Inspecció: Inspect cables and connections for wear or damage. If any part is damaged, discontinue use and contact customer support for replacement parts.
5. Solució De Problemes
This section addresses common issues you might encounter with your crosstrainer.
| Problema | Causa possible | Solució |
|---|---|---|
| Squeaking/Creaking Noise | Loose bolts or dry pivot points. | Tighten all assembly bolts, especially on the pedal arms and handlebars. Apply silicone lubricant to moving joints. |
| Console Not Displaying | Power adapter disconnected, loose cable connection, or power issue. | Ensure the power adapter is securely plugged into the wall and the crosstrainer. Check all console cable connections for tightness. |
| Error Code E1 on Display | Cable connection issue, often related to the main upright post. | Carefully inspect the cable running through the main upright post for damage or improper connection. Ensure no cables are pinched during assembly. Reconnect if loose. |
| Inaccurate Pulse Reading | Improper hand placement or dry hands. | Ensure both hands are firmly gripping the pulse sensors. Lightly moisten hands if they are too dry. |
6. Especificacions
- Model: SP-ET-9700-E
- Marca: SportPlus
- Dimensions (L x A x A): 140 x 63 x 160 cm (55.1 x 24.8 x 63 polzades)
- Pes del producte: 45 kg (99.2 lliures)
- Pes màxim de l'usuari: 130 kg (286 lliures)
- Mecanisme de resistència: Magnetic, Manual
- Color: White / Gold
- ASIN: B006RI23JA
- Número d'article comercial global (GTIN): 04048268104029
7. Garantia i Suport
For warranty information, technical support, or to order replacement parts, please contact SportPlus customer service. Refer to your purchase documentation for specific warranty terms and contact details.
You can often find support information on the official SportPlus weblloc web o a través del venedor on es va comprar el producte.