SAMSON Auro D208

Samson Auro D208 8-Inch Active Loudspeaker

Manual d'instruccions

Introducció

This manual provides essential information for the proper setup, operation, and maintenance of your Samson Auro D208 8-Inch Active Loudspeaker. Please read these instructions thoroughly before using the product to ensure optimal performance and safety.

Informació de seguretat

Always follow basic safety precautions when using this product to reduce the risk of fire, electric shock, or injury. Keep the loudspeaker away from water and moisture. Do not block ventilation openings. Refer all servicing to qualified personnel.

Contingut del paquet

Comproveu que el vostre paquet contingui els elements següents:

  • Samson Auro D208 8-Inch Active Loudspeaker
  • Cable d'alimentació
  • Manual d'usuari

Configuració

Col·locació

The Auro D208 is designed for versatile placement. It can be used as a main PA speaker, a floor monitor, or mounted on a standard 1 3/8-inch (35mm) pole. Ensure the speaker is placed on a stable, level surface or securely mounted to prevent tipping.

Samson Auro D208 8-Inch Active Loudspeaker, front view

Davant view of the Samson Auro D208 Active Loudspeaker, showcasinel seu disseny compacte i la seva reixa protectora.

Connexions

The Auro D208 features a Mic/Line input and an additional Line output for linking multiple speakers.

  1. Connexió d'alimentació: Connect the supplied power cable to the AC inlet on the rear panel and then to a suitable power outlet.
  2. Connexió d'entrada: Use an XLR or 1/4-inch cable to connect your microphone or line-level audio source (e.g., mixer, instrument) to the Mic/Line input.
  3. Enllaç de parlants: To connect additional Auro D208 speakers, use an XLR cable from the Line output of the first speaker to the input of the next speaker.
Rear panel of Samson Auro D208 showing inputs, outputs, and controls

Rear panel of the Samson Auro D208, illustrating the Mic/Line input, Line output, volume control, and Clip LED.

Instruccions de funcionament

Encès/Apagat

After all connections are made, turn on the power switch located on the rear panel. It is recommended to turn on the Auro D208 last in your audio chain and turn it off first.

Control de volum

Adjust the main Volume control knob on the rear panel to set the overall output level of the loudspeaker. Start with the volume at its minimum setting and gradually increase it to the desired level.

Clip LED Indicator

The Clip LED illuminates when the input signal is too strong, indicating potential distortion. If the Clip LED lights up frequently, reduce the input level from your source or the volume on the Auro D208 to prevent signal clipping.

Manteniment

Neteja

Clean the exterior of the loudspeaker with a soft, dry cloth. Do not use abrasive cleaners, solvents, or waxes. Ensure the speaker is unplugged before cleaning.

Emmagatzematge

When not in use, store the loudspeaker in a dry, cool environment, away from direct sunlight and extreme temperatures. If storing for extended periods, consider covering it to protect against dust.

Resolució de problemes

ProblemaCausa possibleSolució
Sense soNo power; input cable disconnected; volume too low.Check power connection and switch; ensure input cables are secure; increase volume.
So distorsionatInput signal too high (clipping); faulty cable.Reduce input level from source or speaker volume; replace cable.
Hum o BuzzBucle de terra; cable defectuós; interferències.Ensure all equipment is on the same electrical circuit; try different cables; move away from power sources.

Especificacions

CaracterísticaDetall
MarcaSAMsÓ
Nom del modelAuro D208
Número de modelSAROD208A
Tipus d'altaveu2-Way Active Loudspeaker
Mida de l'altaveu8 polzades
Diàmetre del woofer8 polzades
Diàmetre del Tweeter1 polzades
Potència de sortida màxima200 watts
Tecnologia de connectivitatUSB (for control, not audio streaming)
Mode de sortida d'àudioestèreo
Tipus de muntatgeClip On, Floor Mount, 1 3/8-inch (35mm) Pole Mount Receptacle
Característiques addicionalsMic/Line input with Volume control and Clip LED, Additional Line output for linking multiple speakers
Dimensions de l'article (D x W x H)17 "P x 12.25" W x 10.25" H
Pes de l'article7.75 grams
Font d'alimentacióElèctric amb cable

Garantia i Suport

Informació de la garantia

This product is covered by a 1-year parts and labor limited warranty. Please retain your proof of purchase for warranty claims.

Atenció al client

For technical assistance, service, or warranty inquiries, please visit the official Samson weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Normalment, podeu trobar la informació de contacte al fabricant weblloc o a l'embalatge del producte.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.