1. Introducció
This manual provides comprehensive instructions for the safe and efficient use of your Deca 300300 Matic 116 traditional electronic battery charger. Please read all instructions carefully before operating the device to ensure proper function and to prevent damage or injury. Keep this manual for future reference.
2. Informació de seguretat
Always observe the following safety precautions when using the battery charger:
- Seguretat elèctrica: Ensure the charger is connected to a grounded outlet. Do not operate the charger with damaged cords or plugs. Avoid contact with water or wet surfaces.
- Gasos explosius: Batteries can produce explosive gases during charging. Ensure adequate ventilation in the charging area. Avoid open flames, sparks, and smoking near the battery.
- Protecció ocular i cutània: Wear appropriate eye protection (safety glasses) and protective clothing when working with batteries. Battery acid is corrosive.
- Infants i personal no autoritzat: Keep the charger and battery out of reach of children. Do not allow untrained individuals to operate the charger.
- Compatibilitat de la bateria: Only charge 12V lead-acid batteries (wet, AGM, gel) within the specified capacity range (5 Ah to 90 Ah). Do not attempt to charge non-rechargeable batteries or batteries with different voltages.
- Ventilació: Ensure the charger itself has adequate ventilation during operation to prevent overheating.
- Desconnexió: Always disconnect the AC power from the charger before disconnecting the battery clamps.
3. Producte acabatview
The Deca 300300 Matic 116 is a traditional electronic battery charger designed for 12V lead-acid automotive batteries. It features electronic control for charging current, automatic charge termination, and an automatic reset function. The charger is supplied with clamp connectors for easy attachment to battery terminals.
3.1. Charger Components
Figura 1: Davant view of the Deca 300300 Matic 116 Battery Charger. This image shows the black, rectangular electronic battery charger with an integrated handle on top. The front panel features a prominent yellow and red label displaying 'MATIC 116', 'ELECTRONIC BATTERY CHARGER', '12V', 'min 5Ah', 'MAX 90Ah', and the 'deca' logo. To the left of the label are three LED indicators: a red LED (top) for error/reverse polarity, a yellow LED (middle) indicating charging ('CHARGE'), and a green LED (bottom) indicating charge complete ('OK'). Icons representing car and van batteries are also visible on the label.
The front panel includes indicator lights to show the charging status:
- LED vermell: Indicates an error, such as reverse polarity connection or a faulty battery.
- Yellow LED (CHARGE): Illuminates when the battery is actively charging.
- Green LED (OK): Illuminates when the battery is fully charged and the charging process has terminated.
4. Configuració
Follow these steps to set up your Deca 300300 Matic 116 charger:
- Preparació: Ensure the battery is clean and free of corrosion on its terminals. If charging a wet lead-acid battery, check the electrolyte level and top up with distilled water if necessary, following the battery manufacturer's instructions.
- Ventilació: Place the battery and charger in a well-ventilated area.
- Connectar Clamps:
- Connecteu el vermell (+) clamp al terminal positiu (+) de la bateria.
- Connecteu el negre (-) clamp al terminal negatiu (-). de la bateria.
Important: Ensure correct polarity. Reverse polarity will trigger the red error LED.
- Connecteu-vos a l'alimentació: Plug the charger's power cord (CEE 7/16 Europlug) into a standard 230V AC, 50/60 Hz grounded electrical outlet.
5. Instruccions de funcionament
Once the charger is set up and connected, it will automatically begin the charging process:
- Iniciar la càrrega: After connecting to the battery and power, the charger will automatically detect the battery and start charging. The yellow 'CHARGE' LED will illuminate.
- Càrrega del monitor: Allow the charger to operate until the green 'OK' LED illuminates. This indicates that the battery is fully charged and the charger has automatically terminated the charging process.
- Charge Termination: The electronic control system ensures that the battery is not overcharged. Once the 'OK' LED is lit, the charger maintains the battery at an optimal level.
- Desconnexió:
- First, unplug the charger from the AC power outlet.
- Next, disconnect the black (-) clamp del terminal negatiu de la bateria.
- Finally, disconnect the red (+) clamp del terminal positiu de la bateria.
6. Manteniment
Un manteniment regular garanteix la longevitat i el rendiment òptim del carregador:
- Neteja: Disconnect the charger from both AC power and the battery before cleaning. Wipe the exterior of the charger with a dry or slightly damp tela. No utilitzeu productes químics o dissolvents aggressivs.
- Cable i Clamp Inspecció: Inspeccioneu periòdicament el cable d'alimentació, els cables de càrrega i el clampConsulteu si hi ha signes de danys, desfilada o corrosió. Substituïu els components danyats immediatament.
- Emmagatzematge: Store the charger in a cool, dry place when not in use. Keep it away from direct sunlight, moisture, and extreme temperatures.
7. Solució De Problemes
If you encounter issues with your Deca 300300 Matic 116 charger, refer to the following table:
| Problema | Causa possible | Solució |
|---|---|---|
| Charger not turning on / No LEDs lit | No AC power; Faulty power outlet; Damaged power cord. | Check power connection; Test outlet with another device; Inspect power cord for damage. |
| El LED vermell està encès | Reverse polarity connection; Short circuit; Faulty battery. | Desconnecta i torna a connectar clamps ensuring correct polarity (+ to +, - to -); Check for short circuits; Have battery tested by a professional. |
| Yellow 'CHARGE' LED does not light up | Battery already fully charged; Poor connection to battery terminals; Battery voltage too low or too high for charger. | Check if green 'OK' LED is lit; Clean battery terminals and re-connect clamps securely; Ensure battery is 12V and within 5-90 Ah capacity. |
| La bateria no es carrega o es carrega lentament | Poor connection; Battery sulfation; Battery capacity too large for charger. | Ensure secure connections; Battery may be beyond recovery; Verify battery capacity is within 90 Ah maximum. |
8. Especificacions
Key technical specifications for the Deca 300300 Matic 116 charger:
- Marca: Deca
- Número de model: 300300
- Font d'alimentació: 1ph - 230 V - 50/60 Hz
- Entrada Voltage: 230 volts (CA)
- Voltage: 12 V
- Average Charging Current: 4 A
- Tipus de bateries compatibles: Lead-acid (wet, AGM, gel)
- Rang de capacitat de la bateria: 5 Ah (minimum) to 90 Ah (maximum)
- Tipus d'endoll: CEE 7/16 Europlug
- Fabricant: Deca S.P.A.
9. Garantia i Suport
Information regarding specific warranty terms for the Deca 300300 Matic 116 is not available in this manual. For warranty claims, technical support, or spare parts inquiries, please contact your retailer or the manufacturer directly. Information on spare parts availability and software updates is not provided.
