1. Introducció
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your HANKISON HPR15 Refrigerated Air Dryer. Please read this manual thoroughly before operating the unit and retain it for future reference.
The HANKISON HPR15 is designed to remove moisture from compressed air, ensuring a dry air supply for various industrial applications. This helps protect downstream equipment from corrosion and damage caused by water.
2. Informació de seguretat
Observeu sempre les següents precaucions de seguretat per evitar lesions i danys a l'equip:
- Ensure the unit is properly grounded before connecting to power.
- Desconnecteu l'alimentació abans de realitzar qualsevol manteniment o servei.
- Do not operate the dryer if any components are damaged or missing.
- Assegureu-vos que hi hagi una ventilació adequada al voltant de la unitat per evitar el sobreescalfament.
- Wear appropriate personal protective equipment (PPE) when working with compressed air systems.
- Refer to local codes and regulations for installation and operation.
3. Producte acabatview i Característiques
The HANKISON HPR15 is a compact and efficient refrigerated air dryer. Its primary function is to cool compressed air, causing water vapor to condense into liquid water, which is then removed from the system.
Figura 3.1: Davant view of the HANKISON HPR15 Refrigerated Air Dryer. This image shows the compact cubic design with a blue top panel, gray side panels, and black grilles revealing internal copper tubing and components. An on/off switch is visible on the right side.
Característiques principals:
- CFM: 15
- Punt de rosada: 43 graus F
- ISO Class: 5
- Màx. Pressió: 250 psi
- Voltage: 115VAC, 1 Phase
- Refrigerant: R-134A
- Material de l'intercanviador de calor: coure
- Includes Pneumatic Drain and 6 ft. Power Cord
- Features On/Off Switch and Power On Light
4. Configuració i instal·lació
Proper installation is crucial for the performance and longevity of your air dryer. Follow these steps carefully:
- Ubicació: Place the dryer in a clean, well-ventilated area, away from direct sunlight or heat sources. Ensure sufficient clearance around the unit for air circulation and maintenance access.
- Muntatge: The unit includes a bracket kit for secure mounting. Ensure the mounting surface is stable and capable of supporting the dryer's weight (approximately 69 lbs).
- Tuberia: Connect the compressed air inlet and outlet pipes (3/8" O.D.) to the dryer. Use appropriate fittings and ensure all connections are airtight. Install a bypass line with shut-off valves to allow for dryer maintenance without interrupting air supply.
- Connexió de drenatge: Connect the pneumatic drain to a suitable condensate disposal system. Ensure the drain line is sloped downwards and free of obstructions.
- Connexió elèctrica: Connect the 115VAC, 1 Phase power cord to a dedicated, properly grounded electrical outlet. Verify the voltage coincideix amb els requisits de la unitat.
- Pre-Start Check: Before powering on, double-check all connections (air, drain, electrical) for security and proper installation.
5. Instruccions de funcionament
Once installed, operating the HANKISON HPR15 is straightforward:
- Encès: Locate the On/Off switch on the unit and switch it to the 'On' position. The 'Power On' light will illuminate, indicating the unit is receiving power and the refrigeration system is active.
- Flux d'aire: Open the inlet and outlet valves on your compressed air system to allow air to flow through the dryer.
- Drenatge de condensats: The pneumatic drain will automatically discharge accumulated condensate. Ensure the drain line is not blocked and condensate is being properly removed.
- Seguiment: Periodically check the dew point (if equipped with a monitor) to ensure the dryer is performing within specifications (43 Degrees F).
- Apagar: To shut down the unit, switch the On/Off switch to the 'Off' position. Close the inlet and outlet air valves.
6. Manteniment
Regular maintenance ensures optimal performance and extends the lifespan of your HANKISON HPR15 air dryer. Always disconnect power before performing maintenance.
Comprovacions rutinàries:
- Diari: Check the condensate drain for proper operation. Ensure no air is escaping and condensate is being discharged.
- Setmanal: Inspect the condenser fins for dust and debris. Clean as necessary using compressed air or a soft brush. Blocked fins reduce cooling efficiency.
- Mensual: Check all electrical connections for tightness. Inspect air connections for leaks using a soapy water solution.
- Anualment: Have a qualified technician inspect the refrigeration system, including refrigerant levels and compressor performance.
Note: Do not attempt to service the refrigeration system yourself. Contact a certified HVAC technician for any issues related to the refrigerant or compressor.
7. Solució De Problemes
This section provides solutions to common issues you may encounter with your air dryer.
| Problema | Causa possible | Solució |
|---|---|---|
| L'assecador no s'encén | No power supply; Faulty On/Off switch; Blown fuse/tripped breaker. | Check power cord and outlet; Test/replace switch; Reset breaker/replace fuse. |
| High dew point / Wet air | Overloaded dryer (CFM too high); High ambient/inlet temperature; Dirty condenser fins; Low refrigerant. | Verify CFM is within limits; Ensure proper ventilation; Clean condenser fins; Contact technician for refrigerant check. |
| Condensate not draining | Blocked drain line; Faulty pneumatic drain. | Clear drain line obstruction; Clean or replace pneumatic drain. |
| Soroll excessiu | Components solts; Obstrucció del ventilador; Problema amb el compressor. | Inspect and tighten loose parts; Clear fan area; Contact technician for compressor diagnosis. |
If the problem persists after attempting these solutions, please contact HANKISON customer support or a qualified service technician.
8. Especificacions
Detailed technical specifications for the HANKISON HPR15 Refrigerated Air Dryer:
- Número de model: HPR15
- ASIN: B007IA73Q4
- CFM: 15
- Punt de rosada: 43 graus F
- ISO Class: 5
- Màx. Pressió: 250 psi
- Mida del tub: 3/8" O.D.
- Voltage: 115VAC, 1 Phase
- Càrrega completa Amps: 2.63
- Potència: 0.24 kW
- Max. Inlet Temp.: 120 graus F
- Màx. Temp. ambient: 110 graus F
- Refrigerant: R-134A
- Refrigeration Compressor (HP): 1/7
- Material de l'intercanviador de calor: coure
- Acabat: Recobert de pols
- Alçada total: 15 polzades.
- Amplada total: 13 polzades.
- Profunditat total: 13 polzades.
- Pes: Approximately 69 Pounds (Package Dimensions: 21 x 18 x 18 inches)
- Fabricant: HANKISON
- Data de primera disponibilitat: 13 de febrer de 2012
9. Garantia i Suport
For warranty information, technical support, or to purchase replacement parts, please contact HANKISON directly or refer to their official website. Keep your purchase receipt and model number (HPR15) readily available when contacting support.
Fabricant: HANKISON
For the most up-to-date contact information, please visit the official HANKISON website or consult your product's packaging.