Manual d'usuari del far LED PAR Cameo Light CLP64RGB10BS

1. Introducció

Thank you for choosing the Cameo Light CLP64RGB10BS LED PAR Headlight. This device is designed for professional lighting applications, offering vibrant RGB color mixing and flexible control options. This manual provides essential information for safe and efficient operation, setup, and maintenance of your PAR headlight.

2. Instruccions de seguretat

• Llegiu aquest manual completament abans de fer funcionar el dispositiu.
• Conserveu aquest manual com a referència futura.
• Connecteu sempre el dispositiu a una presa de corrent amb terra.
• No exposeu el dispositiu a la pluja o la humitat.
• Assegureu-vos que hi hagi una ventilació adequada al voltant de la unitat per evitar el sobreescalfament.
• Eviteu l'exposició directa dels ulls a la font de llum.
• Desconnecteu de l'alimentació abans de netejar o fer el manteniment.
• Les reparacions només han de ser realitzades per personal qualificat.

3. Contingut del paquet

Verifiqueu que hi hagi tots els elements en desempaquetar:

• Cameo Light CLP64RGB10BS LED PAR Headlight
• Mounting Brackets (2 strokes)
• Manual d'instruccions (aquest document)
• Cable d'alimentació

4. Producte acabatview

The Cameo Light CLP64RGB10BS features 183 ultra-bright 10mm LEDs (60 red, 60 green, 63 blue) housed in a durable black casing. It includes a control panel for mode selection and DMX connectivity.

Figura 4.1: Davant view of the Cameo Light CLP64RGB10BS LED PAR Headlight, showing the LED array and included power cable.

Figura 4.2: lateral view of the PAR headlight, illustrating its compact design and ventilation slots.

Figura 4.3: posterior view showing the control panel with LED display, mode buttons, DMX IN, and DMX OUT ports.

Figura 4.4: Detallada view of the 10mm LED array, highlighting the individual red, green, and blue diodes.

5. Configuració

5.1 Muntatge

The CLP64RGB10BS comes with two mounting brackets for versatile installation. These brackets can be used to stand the unit on a flat surface or to attach it to a truss or lighting stand using appropriate clamps (not included). Ensure the mounting surface or structure can safely support the weight of the fixture.

5.2 Connexió d'alimentació

Connect the supplied power cable to the power input on the rear of the unit and then to a standard grounded electrical outlet. The device operates on standard AC power.

Connexió DMX 5.3 (opcional)

For DMX control, connect a DMX controller to the DMX IN port using a 3-pin DMX cable. If linking multiple units, connect the DMX OUT of the first unit to the DMX IN of the next, and so on. Terminate the last unit in the chain with a DMX terminator if experiencing signal issues.

6. Funcionament

6.1 Tauler de control

The control panel on the rear of the unit (refer to Figure 4.3) features an LED display and three buttons: MODE, UP, and DOWN. These buttons are used to navigate menus and adjust settings.

• Mode: Cycles through the main menu options and confirms selections.
• AMUNT: Augmenta valors o puja per les opcions del menú.
• BAIX: Disminueix valors o baixa per les opcions del menú.

6.2 Modes de funcionament

The CLP64RGB10BS supports several operating modes:

• Mode DMX: Allows external control via a DMX controller. The unit can be set to 4 or 6 DMX channels.
• Mode mestre/esclau: One unit acts as the master, controlling other slave units. Connect DMX OUT of the master to DMX IN of the first slave, and so on.
• Mode autònom: The unit operates independently using pre-programmed settings or sound-activated programs.

6.3 modes de canal DMX

The device offers two DMX channel configurations:

• Mode d'4 canals: Typically controls Red, Green, Blue intensity, and Master Dimmer/Strobe.
• Mode d'6 canals: Provides more granular control, often including Red, Green, Blue intensity, Master Dimmer, Strobe, and Color Macros or other effects.

Refer to the DMX occupation diagram printed on the unit (Figure 4.3) for pin assignments: 1: Ground, 2: Signal (-), 3: Signal (+).

6.4 Sound-to-Light Functionality

In Standalone mode, the unit can react to music via its built-in microphone. Use the control panel to select sound-activated programs and adjust sensitivity if available.

7. Manteniment

7.1 Neteja

Regular cleaning helps maintain optimal light output and extends the lifespan of the unit. Disconnect power before cleaning.

• Feu servir un drap suau i sense borrissol per netejar l'exterior casing.
• For the LED lens, use a soft cloth lightly dampened with a mild glass cleaner. Avoid harsh chemicals.
• Assegureu-vos que les obertures de ventilació estiguin lliures de pols i deixalles.

7.2 Emmagatzematge

When not in use, store the PAR headlight in a dry, dust-free environment, preferably in its original packaging or a protective case.

8. Solució De Problemes

9. Especificacions

10. Garantia i Suport

Cameo products are designed for reliability and performance. For information regarding warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Cameo website. For technical support, service, or spare parts, please contact your local dealer or the Cameo customer service department.

Si us plau, conserveu el comprovant de compra per a qualsevol reclamació de garantia.