U.S. Solid 1/2 inch Brass Electric Solenoid Valve 24VAC VITON Seal N.C. Instruction Manual

1. Introducció

This manual provides essential information for the safe and effective installation, operation, and maintenance of your U.S. Solid 1/2 inch Brass Electric Solenoid Valve. This valve features durable brass construction and a VITON seal, designed for use with various media including air, gas, and fuel. It operates as a Normally Closed (N.C.) valve, meaning it remains closed when de-energized and opens when electrical power is applied.

Figure 1: U.S. Solid 1/2 inch Brass Electric Solenoid Valve (Model USS2-00001).

2. Informació de seguretat

Please read all safety warnings and instructions carefully before installing or operating this valve. Failure to do so may result in property damage, injury, or death.

• Lead Exposure Warning: Aquest producte us pot exposar a substàncies químiques, com ara el plom, que l'estat de Califòrnia sap que causa càncer i defectes de naixement o altres danys reproductius. Per a més informació, visiteu www.P65Warnings.ca.gov.
• Non-Potable Water Use: Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other potable water systems. It is not allowed to be installed in potable water pipelines.
• Cicle de treball: This valve is NOT a continuous duty valve. It should NOT be in continuous use for more than 8 hours in a single cycle. Exceeding this duration will shorten the valve's lifespan and may cause the coil to burn out. If continuous duty is required, consider U.S. Solid Motorized Ball Valves.
• Seguretat elèctrica: Ensure all electrical connections are made by a qualified professional and comply with local electrical codes. Disconnect power before installation or maintenance.
• Límits de pressió: Do not exceed the maximum operating pressure of 101.52 PSI (7 Bar) for air/water or 72.5 PSI (5 Bar) for oil.
• Límits de temperatura: Operate within the specified temperature range of -10°C to 120°C (14°F to 248°F).

Figure 2: Safety warnings and product ratings, including the California Prop 65 warning and a note on continuous operation.

3. Producte acabatview

3.1 Components

El paquet del producte inclou:

• 1 x U.S. Solid 1/2 inch Brass Electric Solenoid Valve
• 1 x Manual d'usuari

3.2 Característiques clau

• Material: Industrial grade brass for corrosion resistance and suitability for higher temperature projects.
• Segell: VITON seal, offering superior durability and resistance to high temperatures and corrosive chemicals (e.g., gasoline, diesel fuel, oils, lubricants).
• Funcionament: Normally Closed (N.C.) - valve is closed when de-energized, open when energized.
• Voltage: 24 VAC.
• Temps de resposta: Opens and closes in less than 1 second when actuated.
• Durabilitat: Engineered for over a million cycles under proper operating conditions and maintenance.
• Protecció d'entrada: IP65 rated, indicating dust-tight protection and protection against water jets from any direction.

Figura 3: Frontal view.

Figura 4: lateral view.

Figure 5: Solenoid coil label with specifications.

3.3 Seal Material Comparison (VITON vs. NBR)

The VITON seal in this valve offers superior performance compared to NBR (Nitrile Butadiene Rubber) in certain applications, particularly those involving higher temperatures and more aggressive chemicals.

Figure 6: VITON vs. NBR Seal Material Compatibility and Temperature Ranges.

3.4 Solenoid Valve Types

This valve operates on a direct-acting principle, which means it opens by lifting the plunger with electromagnetic force and closes with a spring. This design is suitable for low-pressure, small-flow, and vacuum applications, offering fast response.

Figure 7: Solenoid Valve Operating Principles.

4. Especificacions

Figure 8: Dimensional drawing of the solenoid valve (refer to 1/2 inch NPT for this model).

5. Instal·lació

Proper installation is crucial for the safe and efficient operation of the solenoid valve.

1. Preparació: Ensure the system is depressurized and drained before installation. Clean all pipe threads to remove debris.
2. Segellador de rosques: Apply an appropriate thread sealant (e.g., PTFE tape or pipe dope) to the male pipe threads. Ensure the sealant is compatible with the media being controlled.

Figure 9: Applying thread sealant.
3. Muntatge: Install the valve in the desired position, ensuring the flow direction matches the arrow on the valve body. The valve can be mounted in any orientation, but for optimal performance and lifespan, it is generally recommended to mount the coil vertically upwards.
4. Apretament: Hand-tighten the valve onto the pipe, then use a wrench to tighten an additional 1 to 2 turns. Do not overtighten, as this can damage the valve or threads.
5. Filtració: It is recommended to install a filter upstream of the solenoid valve to prevent debris from entering and potentially obstructing the valve's operation. (Filter not included).


Figure 10: External filter and hose are not included and may be required for certain applications.

6. Connexió elèctrica: Connect the valve to a 24VAC power source. Ensure the power supply matches the valve's voltage rating. All electrical work should be performed by a qualified electrician and adhere to local codes.
7. Comprovació de fuites: After installation, slowly pressurize the system and check for any leaks at the connections.

6. Funcionament

This U.S. Solid solenoid valve is a Normally Closed (N.C.) type. Its operation is straightforward:

• Estat desenergitzat: When no electrical power is supplied to the coil, the valve remains closed, preventing fluid flow.
• Estat energitzat: When 24VAC electrical power is applied to the coil, the electromagnetic force lifts the plunger, opening the valve and allowing fluid flow.
• Resposta: The valve opens and closes rapidly, typically in less than 1 second.

Important Operating Note: As stated in the safety section, this valve is not designed for continuous duty. Avoid keeping the valve energized for more than 8 hours in a single cycle to prevent overheating and premature failure of the coil.

7. Manteniment

Regular maintenance helps ensure the longevity and reliable performance of your solenoid valve.

• Inspecció periòdica: Periodically inspect the valve for any signs of leaks, corrosion, or damage to the wiring.
• Neteja: Ensure the area around the valve is kept clean and free of debris that could interfere with its operation.
• Coil Condition: Check the solenoid coil for any signs of overheating (discoloration, melting). If detected, review operating conditions, especially the duty cycle.
• Integritat del segell: While VITON seals are highly durable, extreme conditions or incompatible media can degrade them over time. If leaks occur, inspect the seal for damage.

Always disconnect power and depressurize the system before performing any maintenance.

8. Solució De Problemes

If you encounter issues with your solenoid valve, refer to the following troubleshooting guide:

9. Garantia i Suport

U.S. Solid stands behind the quality of its products.

• Garantia d'un any: This valve comes with a ONE YEAR WARRANTY from the date of purchase. If the valve becomes defective within this period, U.S. Solid will replace it.
• Atenció al client: For technical assistance, warranty claims, or further inquiries, please visit the official U.S. Solid Store or contact customer service.

Visita el U.S. Solid Store per a més informació i ofertes de productes.