Synergy 173269-3-1/2AA-B

Synergy Cordless Phone Battery 173269-3-1/2AA-B User Manual

Model: 173269-3-1/2AA-B

Introducció

This manual provides essential instructions for the safe and effective use of your Synergy 173269-3-1/2AA-B cordless phone battery. This Ni-CD battery is designed for compatibility with various cordless phone models, including Sanyo 3N-270AA(mtm) and Sony BP-T16. Please read this manual thoroughly before installation and use.

Configuració i instal·lació

Follow these steps to properly install the battery into your cordless phone:

  1. Identifica el compartiment de la bateria: Locate the battery compartment on your cordless phone handset. This is typically on the back or bottom of the handset.
  2. Treure la bateria antiga (si escau): If replacing an existing battery, carefully disconnect it from the phone's connector and remove it. Observe the polarity (+/-) for correct orientation.
  3. Connecteu la bateria nova: Connect the Synergy 173269-3-1/2AA-B battery's connector to the corresponding port inside the phone's battery compartment. Ensure a secure connection.
  4. Insereix la bateria: Place the battery into the compartment, ensuring it fits snugly. Do not force the battery if it does not fit. Verify compatibility with your phone model.
  5. Compartiment tancat: Substituïu la tapa del compartiment de la bateria.
  6. Càrrec inicial: Place the handset on its charging base for at least 12-16 hours for the initial charge, even if the phone indicates a full charge sooner. This conditions the battery for optimal performance.
Synergy Cordless Phone Battery 173269-3-1/2AA-B

Image: Synergy 173269-3-1/2AA-B cordless phone battery. This image shows the battery itself, which is a rectangular pack with a connector, ready for installation into a compatible cordless phone handset.

Instruccions de funcionament

Once installed and initially charged, the battery operates as a standard power source for your cordless phone. No special operating procedures are required beyond normal phone usage.

  • Càrrega regular: Torneu sempre el telèfon a la base de càrrega quan no l'utilitzeu per assegurar-vos que la bateria es mantingui carregada.
  • Indicador de bateria: Controla l'indicador del nivell de bateria del telèfon. Torna a carregar la bateria quan l'indicador mostri que hi ha poca bateria.
  • Discharge Cycle: For Ni-CD batteries, it is beneficial to occasionally allow the battery to fully discharge before recharging to help maintain its capacity. This is typically recommended once every few months.

Manteniment i cura

Un manteniment adequat allarga la vida útil de la bateria:

  • Temperatura: Store and operate the battery within normal room temperature ranges. Avoid extreme heat or cold, which can degrade battery performance and lifespan.
  • Neteja: Keep the battery contacts and phone charging contacts clean and free of dust or debris. Use a dry, soft cloth for cleaning.
  • Eliminació: Do not dispose of batteries in household waste. Ni-CD batteries contain materials that require special recycling. Consult your local regulations for proper battery recycling facilities.
  • Eviteu curtcircuits: No curtcircuiteu els terminals de la bateria.

Resolució de problemes

ProblemaCausa possibleSolució
El telèfon no s'encén després d'instal·lar la bateria.Battery not properly connected or not charged.Ensure battery connector is securely plugged in. Place handset on charging base for initial charge (12-16 hours).
Short talk time or rapid battery drain.Battery not fully charged or reaching end of lifespan.Ensure handset is consistently placed on the charging base. Perform a full discharge/recharge cycle. If problem persists, battery may need replacement.
Battery does not fit into compartment.Incorrect battery model for your phone.Verify the battery model number (173269-3-1/2AA-B) against your phone's requirements. Do not force the battery.

Especificacions

  • Model: Synergy 173269-3-1/2AA-B
  • Composició de la cèl·lula de la bateria: Ni-CD (Nickel-Cadmium)
  • Voltage: 3.6 V
  • Capacitat: 400 mAh (Milliamp hores)
  • Dimensions: 6 x 6 x 6 inches (Product packaging dimensions, actual battery dimensions may vary slightly)
  • Pes de l'article: 1.6 unces
  • Compatibilitat: Sanyo 3N-270AA(mtm), Sony BP-T16, and other compatible models.

Garantia i Suport

For warranty information or technical support, please refer to the original purchase documentation or contact Synergy Digital customer service. Keep your purchase receipt for warranty claims.

Nota: Aquest producte és d'una marca per a petites empreses. Doneu suport a les petites empreses.

© 2024 Synergy Digital. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.