Hansgrohe Ecostat 13115000 Thermostatic Bath Mixer Instruction Manual

1. Introducció

This manual provides essential information for the installation, operation, and maintenance of your Hansgrohe Ecostat 13115000 Thermostatic Bath Mixer. Please read these instructions carefully before installation and use to ensure safe and efficient operation.

The Hansgrohe Ecostat 13115000 is a thermostatic bath mixer designed for exposed installation, featuring extra-long handles for ease of use and precise control. It is engineered to provide a consistent water temperature and flow for both bath spout and hand shower outlets.

2. Informació de seguretat

• Scald Protection: The thermostatic mixer includes a safety stop set at 40°C (104°F) to prevent accidental scalding. This feature helps maintain a constant water temperature.
• Pressió de funcionament: This unit is suitable for high-pressure systems only, with a minimum operating pressure of 1 bar (14.5 PSI) and a maximum operating pressure of 10 bar (145 PSI). Ensure your water supply meets these requirements.
• Instal·lació: Installation must be performed by a qualified professional in accordance with local plumbing codes and regulations.
• Temperatura de l'aigua: Always test the water temperature with your hand before full immersion, especially for children or individuals with sensitive skin.

3. Components inclosos

The following components are typically included with your Hansgrohe Ecostat 13115000 Thermostatic Bath Mixer:

• Thermostatic Bath Mixer Unit
• S-connections (for wall mounting)
• Escutcheons (decorative covers)
• Manual d'instruccions de muntatge (aquest document)

4. Configuració i instal·lació

The Hansgrohe Ecostat 13115000 is designed for exposed wall-mounted installation. Refer to the technical drawing below for precise dimensions and connection points. Professional installation is recommended.

Figura 1: Technical drawing showing the dimensions and connection points (G1/2) for the Hansgrohe Ecostat 13115000 Thermostatic Bath Mixer. Key measurements include a center distance of 150 ±12 mm for connections, a spout reach of 172-177 mm, and overall width of 350 mm.

Installation Steps (Summary - refer to detailed assembly instructions for full guidance):

1. Ensure water supply is turned off.
2. Mount the S-connections to the wall, ensuring the correct spacing (150 ±12 mm) and alignment.
3. Attach the thermostatic mixer unit to the S-connections.
4. Secure the escutcheons to cover the connections.
5. Connect the bath spout and hand shower outlets as required.
6. Obriu el subministrament d'aigua i comproveu si hi ha fuites.
7. Calibrate the thermostat if necessary, following the specific instructions provided in the assembly guide.

5. Instruccions de funcionament

The Hansgrohe Ecostat 13115000 features two extra-long handles for intuitive control of water flow and temperature.

• Control de flux: Use the handle on the right (typically) to adjust the water flow rate and to switch between the bath spout and hand shower outlets. Turn the handle to increase or decrease flow.
• Control de temperatura: Use the handle on the left (typically) to set the desired water temperature. Rotate the handle to adjust. The safety stop at 40°C (104°F) prevents temperatures from exceeding this limit without intentional override. To exceed 40°C, press the safety button on the handle and continue rotating.
• Selecció de punts de venda: The mixer is designed to run two outlets. The flow control handle allows you to select between the bath spout and a connected hand shower.

6. Manteniment

Regular maintenance ensures the longevity and optimal performance of your thermostatic bath mixer.

• Neteja: Clean the mixer regularly with a soft cloth and a mild, non-abrasive cleaning agent. Avoid using cleaners containing alcohol, acids, or abrasive particles, as these can damage the chrome finish.
• Tecnologia QuickClean: The mixer features QuickClean technology for easy limescale removal. Simply rub the silicone nozzles on the bath spout or hand shower (if connected) to dislodge limescale deposits.
• Manteniment del filtre: Periodically check and clean the filters located in the S-connections to ensure unrestricted water flow.

7. Solució De Problemes

If you encounter issues with your thermostatic bath mixer, consider the following common solutions:

• Baix cabal d'aigua: Check if the water supply valves are fully open. Inspect and clean the filters in the S-connections for blockages. Ensure your water pressure meets the minimum requirement of 1 bar.
• Temperatura inconsistent: Verify that the hot and cold water supplies are correctly connected. If the temperature is not stable, the thermostat may need recalibration (refer to the detailed assembly instructions). Ensure sufficient hot water supply.
• Fuites: Comproveu que totes les connexions estiguin ben ajustades. Si les fuites persisteixen, és possible que necessiteu assistència professional.
• Sense aigua: Confirm that the main water supply to your home is active. Check for any closed shut-off valves.

For persistent problems, contact a qualified plumber or Hansgrohe customer support.

8. Especificacions

9. Garantia i Suport

Hansgrohe provides a comprehensive warranty for its products.

• Garantia del producte: This Hansgrohe thermostatic bath mixer comes with a 5 any de garantia, covering manufacturing defects and material faults.
• Disponibilitat de peces de recanvi: Hansgrohe guarantees the availability of spare parts for 15 anys from the date of purchase, ensuring long-term serviceability of your product.

Figura 2: Official Hansgrohe badges indicating a 5-year product warranty and 15-year spare parts availability.

For warranty claims, technical support, or to order spare parts, please contact Hansgrohe customer service through their official website or authorized distributors. Keep your proof of purchase for warranty validation.