RAB Lighting FFLED39 Future Flood LED Light User Manual

1. Producte acabatview

The RAB Lighting FFLED39 Future Flood LED Light is a high-performance, energy-efficient outdoor floodlight designed for various applications. This hardwired fixture features a durable bronze finish and provides cool white illumination.

Figure 1: RAB Lighting FFLED39 Future Flood LED Light

Característiques principals:

• Potència: 39-watt LED
• Temperatura de color: 5100K blanc fred
• Vida útil: 100,000 hours based on LM-80 tests
• LED: Three multi-chip 13-watt high-performance LEDs
• Ptica: NEMA type 7H x 6V with Air-flow technology heatsink
• Reflector: Semi-specular anodized aluminum
• Juntes: Silicona d'alta temperatura
• Acabat: Bronze chip and fade-resistant polyester powder coat
• Voltage: 120-volt to 277-volt operation

2. Informació de seguretat

Read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.

• Seguretat elèctrica: Installation must be performed by a qualified electrician in accordance with all national and local electrical codes. Ensure power is disconnected at the circuit breaker before installation or servicing.
• Posada a terra: The fixture must be properly grounded to prevent potential electric shock.
• Muntatge: Ensure the mounting surface is structurally sound and capable of supporting the fixture's weight (approximately 10.23 lbs).
• Temperatura de funcionament: Do not operate the fixture outside its specified temperature range.
• LED: Do not stare directly into the LED light source when the fixture is operating, as this may cause eye damage.

3. Instal·lació

This floodlight is designed for wall mounting and requires hardwired installation. Professional installation is recommended.

Eines necessàries:

• Tornavís (Phillips i cap pla)
• Pelacables
• Alicates
• Drill (if mounting surface requires pilot holes)
• Clau ajustable

Opcions de muntatge:

The FFLED39 supports various mounting options. The standard fixture comes with a wall mount. Optional accessories may include slipfitter mounts or other specialized brackets.

Figura 2: Example of a Slipfitter Mount (optional accessory)

Passos d'instal·lació:

1. Desconnecteu l'alimentació: Turn off power at the circuit breaker before beginning installation. Verify power is off using a voltage provador.
2. Preparació de la superfície de muntatge: Securely attach the mounting bracket to the desired wall location. Ensure the bracket is level and firmly fastened.
3. Connexions de cable:
   • Connect the black wire from the fixture to the hot (L) wire from the power supply.
   • Connect the white wire from the fixture to the neutral (N) wire from the power supply.
   • Connect the green or bare copper wire from the fixture to the ground wire from the power supply.
   • Use appropriate wire connectors and ensure all connections are secure.
4. Fixació de muntatge: Attach the FFLED39 fixture to the mounting bracket. Secure it with the provided screws or bolts.
5. Ajustar l'objectiu: Loosen the adjustment screws on the fixture to aim the light as desired. Tighten the screws firmly once the desired angle is achieved.
6. Restaura l'alimentació: Turn on power at the circuit breaker. Test the fixture for proper operation.

4. Funcionament

The RAB Lighting FFLED39 is a hardwired floodlight. Its operation is typically controlled by an external switch or a photocell (if installed).

Funcionament estàndard:

• Once installed and wired, the fixture will illuminate when power is supplied via the connected wall switch or control system.
• Ensure the power source is within the specified 120-277V range.

Photocell Control (Optional):

If a photocell is integrated or installed with the fixture, the light will automatically turn on at dusk and off at dawn, based on ambient light levels.

Figura 3: Example of a Photocell (optional accessory)

5. Manteniment

The FFLED39 LED floodlight is designed for minimal maintenance due to its long-life LED components and durable construction.

Neteja:

• Exterior: Netegeu periòdicament l'exterior de l'aparell amb un drap suau i sec.amp drap per eliminar la brutícia, la pols i les restes. No utilitzeu productes de neteja abrasius ni dissolvents.
• Lent: Gently wipe the lens with a clean, soft cloth to ensure maximum light output.

Inspecció:

• Inspeccioneu periòdicament l'aparell per detectar qualsevol signe de danys, connexions soltes o desgast.
• Ensure all mounting hardware remains tight and secure.
• Si observeu algun dany, desconnecteu l'alimentació i contacteu amb un electricista qualificat per a la seva reparació o substitució.

6. Solució De Problemes

If you experience issues with your FFLED39 floodlight, refer to the following troubleshooting guide:

If the problem persists after following these steps, contact RAB Lighting customer support or a qualified electrician.

7. Especificacions

Detailed technical specifications for the RAB Lighting FFLED39 Future Flood LED Light:

Figure 4: Indication of 100,000-hour LED lifespan

8. Garantia i Suport

Garantia del fabricant:

The RAB Lighting FFLED39 Future Flood LED Light is covered by a Garantia del fabricant de 1 anys des de la data de compra. Aquesta garantia cobreix els defectes de materials i de fabricació en condicions d'ús i manteniment normals.

The warranty does not cover damage resulting from improper installation, accident, misuse, abuse, negligence, or unauthorized modification or repair.

Atenció al client:

For technical assistance, warranty claims, or further information, please contact RAB Lighting customer support. Refer to the official RAB Lighting weblloc web per obtenir dades de contacte actuals.