D-Link GO-SW-8G 8-Port Unmanaged Gigabit Desktop Switch

Configuració

Contingut del paquet

Comproveu que el vostre paquet contingui els elements següents:

• GO-SW-8G device
• Adaptador d'alimentació

Connectant l'interruptor

The GO-SW-8G is a plug-and-play device, requiring no software configuration for basic operation. Follow these steps to set up your switch:

1. Connexió d'alimentació: Connect the provided power adapter to the power input port on the rear panel of the GO-SW-8G switch and then plug the adapter into a standard electrical outlet.
2. Connexió de dispositius de xarxa: Connect Ethernet cables from your network devices (e.g., computers, network-attached storage, routers) to any of the eight available RJ45 ports on the GO-SW-8G switch. The switch supports auto MDI/MDIX, so you can use either straight-through or crossover Ethernet cables.
3. Verificació: Once connected, the corresponding LED indicator for each active port will illuminate, indicating a successful link.

Image: D-Link GO-SW-8G 8-Port Unmanaged Gigabit Desktop Switch. This image displays the compact white design of the switch with its multiple Ethernet ports and power input.

En funcionament

The D-Link GO-SW-8G operates as an unmanaged switch, meaning it requires no user configuration for its core functions. It automatically detects network speed and duplex mode for each connected device, providing optimal performance. The Gigabit Ethernet ports support data transfer rates of up to 1000 Mbps, facilitating fast communication within your local network.

Indicadors LED

The switch features LED indicators for each port and for power. These indicators provide visual feedback on the status of the switch and its connections:

• LED d'alimentació: S'il·lumina quan l'interruptor està encès.
• LED d'enllaç/activitat (per port):
  • Verd sòlid: Indicates a successful network link at Gigabit speed (1000 Mbps).
  • Ambre sòlid: Indicates a successful network link at Fast Ethernet speed (10/100 Mbps).
  • Parpellejant: Indicates network activity (data transmission or reception) on that port.
  • Apagat: No link detected or device is not powered on/connected.

Manteniment

To ensure optimal performance and longevity of your D-Link GO-SW-8G switch, follow these general maintenance guidelines:

• Col·locació: Place the switch in a well-ventilated area to prevent overheating. Avoid direct sunlight and heat sources.
• Neteja: Feu servir un drap suau i sec per netejar l'exterior de l'interruptor. No utilitzeu netejadors líquids ni en aerosol.
• Gestió de cables: Assegureu-vos que els cables de xarxa estiguin ben organitzats i no estiguin excessivament doblegats ni tensats.
• Font d'alimentació: Utilitzeu només l'adaptador d'alimentació subministrat amb el dispositiu.

Resolució de problemes

If you encounter issues with your D-Link GO-SW-8G switch, refer to the following common troubleshooting steps:

• Sense energia:
  • Assegureu-vos que l'adaptador de corrent estigui connectat correctament a l'interruptor i a una presa de corrent que funcioni.
  • Comproveu si la presa de corrent funciona connectant-hi un altre dispositiu.
• Sense llum d'enllaç:
  • Verify that the Ethernet cable is securely plugged into both the switch port and the network device.
  • Assegureu-vos que el dispositiu de xarxa connectat estigui encès i funcioni correctament.
  • Prova un cable Ethernet diferent per descartar una fallada del cable.
  • Prova amb un port diferent al commutador.
• Velocitat de xarxa lenta:
  • Confirm that all connected devices and cables support Gigabit Ethernet (1000 Mbps) for optimal performance.
  • Comproveu si hi ha trànsit de xarxa excessiu o aplicacions que consumeixen molta amplada de banda i que s'executen en dispositius connectats.
  • Ensure the switch is placed in an area with adequate ventilation to prevent performance degradation due to overheating.

Especificacions

Informació de la garantia

The D-Link GO-SW-8G switch comes with a Garantia limitada d'3 any. For detailed terms and conditions, please refer to the warranty card included with your product or visit the official D-Link weblloc.

Suport

For technical support, product registration, or to download the latest firmware and documentation, please visit the official D-Link support website. You can typically find support resources by searching for your product model (GO-SW-8G) on their site.

D-Link Official Weblloc: www.dlink.com