SOMA RunONE 100SL Running Watch User Manual

1. Introducció

Welcome to the SOMA RunONE 100SL Running Watch user manual. This guide provides detailed instructions on how to set up, operate, and maintain your new running watch. Please read this manual thoroughly to ensure proper use and to maximize the performance and longevity of your device.

2. Producte acabatview

The SOMA RunONE 100SL is an advanced running watch designed for athletes seeking a lightweight, user-friendly, and feature-rich device to track their performance. It offers essential functions for runners, including a precise chronograph, lap memory, timer, and daily alarms.

Figura 2.1: SOMA RunONE 100SL Running Watch, front view. This image shows the watch in blue, featuring its digital display with time, day, and date, along with the 'ADJUST', 'MODE', 'START/STOP', 'NEXT', 'LAP 100MEMORY', and 'LAP/SAVE' buttons.

Característiques principals:

• Material: Case/Plastic, Strap/Polyurethane, Glass/Acrylic Glass, Back Cover: Stainless Steel
• Compatible Wrist Circumference: Large/5.7 - 8.1 inches (145 - 205 mm), Medium/5.1 - 6.9 inches (130 - 175 mm)
• Funció de cronògraf: 1/100 second, up to 99 hours, 59 minutes, 59 seconds
• Lap Split Function: 100 lap memory
• Funció de temporitzador: 2-channel repeat timer
• Funció d'alarma: 3-channel daily alarm

Figura 2.2: posterior view of the SOMA RunONE 100SL Running Watch. The back of the watch reveals the stainless steel case back with 'SOMA', 'PLASTICS CASE', 'STAINLESS STEEL BACK', 'WATER RESIST 10BAR', and model number 'WJ08-4000' engraved. The blue polyurethane strap is also visible.

3. Configuració

3.1. Instal·lació de la bateria

The SOMA RunONE 100SL requires one CR2 battery (included). To install or replace the battery:

1. Carefully remove the back cover of the watch using a small screwdriver.
2. Inseriu la pila CR2, assegurant-vos de la polaritat correcta (+/-).
3. Replace the back cover and tighten the screws securely to maintain water resistance.

3.2. Configuració inicial de l'hora

After battery installation, you will need to set the time and date:

1. In Time Mode, press and hold the 'ADJUST' button until the display flashes, indicating setup mode.
2. Use the 'MODE' button to cycle through settings (e.g., hour, minute, year, month, day, 12/24-hour format).
3. Use the 'START/STOP' or 'NEXT' buttons to adjust the values.
4. Press 'ADJUST' again to save settings and exit setup mode.

4. Modes de funcionament

The watch features several operating modes. Press the 'MODE' button to cycle through them.

4.1. Mode horari

This is the default mode, displaying the current time, day of the week, and date. You can switch between 12-hour and 24-hour formats in the initial time setting.

4.2. Mode de cronògraf (cronòmetre)

To use the stopwatch function:

1. Navigate to Chronograph Mode using the 'MODE' button.
2. Press 'START/STOP' to begin timing.
3. Press 'LAP/SAVE' to record a lap time. The watch can store up to 100 lap times.
4. Press 'START/STOP' again to pause the timer.
5. Press 'ADJUST' to reset the stopwatch to zero.

4.3. Mode de temporitzador

The watch includes a 2-channel repeat timer:

1. Go to Timer Mode using the 'MODE' button.
2. Press and hold 'ADJUST' to enter timer setting mode.
3. Use 'MODE' to select the timer channel (CH1 or CH2) and 'START/STOP' or 'NEXT' to set the desired countdown time.
4. Press 'ADJUST' to save.
5. Press 'START/STOP' to begin the countdown. The timer will repeat if the repeat function is enabled.

4.4. Mode d'alarma

Set up to three daily alarms:

1. Switch to Alarm Mode using the 'MODE' button.
2. Press 'NEXT' to select Alarm 1, 2, or 3.
3. Press and hold 'ADJUST' to enter alarm setting mode.
4. Use 'START/STOP' or 'NEXT' to set the alarm time.
5. Press 'ADJUST' to save.
6. Toggle the alarm ON/OFF using 'START/STOP' when in Alarm Mode (not setting mode).

4.5. Llum de fons

To illuminate the display in low-light conditions, press the 'ADJUST' button briefly. The backlight will remain on for a few seconds.

5. Manteniment

5.1. Neteja

Per netejar el rellotge, netegeu-lo amb un drap suau iamp cloth. Avoid using harsh chemicals or abrasive materials, as these can damage the watch's finish and seals.

5.2. Substitució de la bateria

When the display becomes dim or functions become erratic, it's time to replace the battery. Refer to section 3.1 for battery installation instructions. It is recommended to have battery replacement performed by a qualified technician to ensure water resistance is maintained.

5.3. Resistència a l'aigua

The SOMA RunONE 100SL is water-resistant up to 10 BAR (100 meters). This means it is suitable for swimming and snorkeling, but not for scuba diving. Do not operate buttons underwater to prevent water ingress.

6. Solució De Problemes

• La pantalla està en blanc: Check if the battery needs replacement (refer to section 3.1).
• Els botons no responen: Ensure the watch is not in a locked mode (if applicable, consult specific model features) or try resetting the watch by removing and reinserting the battery.
• Hora/data incorrecta: Re-enter the time and date settings as described in section 3.2.
• Aigua dins del rellotge: Deixeu d'utilitzar el rellotge immediatament i busqueu un servei professional. No intenteu assecar-lo vosaltres mateixos.

7. Especificacions

8. Garantia i Suport

Your SOMA RunONE 100SL Running Watch is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official SOMA website. For technical support, service, or inquiries, please contact your retailer or the SOMA customer service department.