Tivoli Audio Model One BT

Manual d'instruccions de la ràdio AM/FM Bluetooth Tivoli Audio Model One

Model: Model One BT

Introducció

The Tivoli Audio Model One Bluetooth AM/FM Radio is designed to provide high-quality audio reception and reproduction. Featuring a classic design with a handmade wood cabinet, this radio integrates both traditional AM/FM tuning and modern Bluetooth connectivity. Its simple controls offer an intuitive user experience, delivering clear sound and reliable performance.

Què hi ha a la caixa

  • (1) Model One BT Radio
  • (1) Manual del propietari
  • (1) Font d'alimentació
  • (1) External FM Antenna

Configuració

  1. Desembalatge: Traieu amb cura tots els components de l'embalatge.
    Tivoli Audio Model One Bluetooth AM/FM Radio in White/Silver
    Figura 1: Frontal view of the Tivoli Audio Model One BT radio.
  2. Connexió d'alimentació: Connect the power supply to the DC input on the rear of the radio and then plug it into a wall outlet.
    Rear panel of Tivoli Audio Model One radio showing power input and antenna connections
    Figure 2: Rear panel connections, including power input and external antenna port.
  3. Connexió d'antena: For optimal FM reception, connect the included external FM antenna to the "FM-EXT" jack on the rear panel. For AM reception, the internal AM antenna is usually sufficient, but an external AM antenna can be connected if needed.
  4. Col·locació: Position the radio on a stable, flat surface away from direct sunlight, heat sources, or excessive moisture. Experiment with different locations to find the best reception for both AM and FM bands.

Instruccions de funcionament

1. Power On/Off and Source Selection

  • Locate the three-position switch on the front panel.
  • To turn the radio on, slide the switch from "OFF" to either "FM", "AM", "BT" (Bluetooth), or "AUX" (Auxiliary Input) depending on your desired source.
  • To turn the radio off, slide the switch to "OFF".

2. AM/FM Radio Tuning

  • Set the source switch to "FM" or "AM".
  • Use the large tuning dial to scan for stations. The tuning indicator light will illuminate when a strong signal is received, indicating optimal tuning.
  • Ajusteu el volum amb el botó de volum.
Close-up of Tivoli Audio Model One radio front panel showing tuning dial, volume knob, and source switch
Figure 3: Front panel controls for tuning and volume.

3. Connectivitat Bluetooth

  • Set the source switch to "BT". The Bluetooth indicator light will begin to flash, indicating it is in pairing mode.
  • On your Bluetooth-enabled device (e.g., smartphone, tablet), navigate to the Bluetooth settings and select "Tivoli Audio Model One BT" from the list of available devices.
  • Once paired, the Bluetooth indicator light on the radio will glow solid, and you can stream audio from your device.

4. Entrada auxiliar

  • Connect an external audio device (e.g., MP3 player, CD player) to the "AUX IN" port on the rear panel using a 3.5mm audio cable (not included).
  • Set the source switch to "AUX".
  • Controla la reproducció i el volum des del dispositiu connectat.

5. Vídeo oficial del producte

Video 1: A short demonstration by Tivoli Audio showcasing the Model One BT radio in a relaxing home environment, highlighting its use for background music.

Manteniment

  • Neteja: Use a soft, dry cloth to clean the radio's cabinet and controls. Avoid abrasive cleaners or solvents, which can damage the finish.
  • Cura de la fusta: The wood cabinet can be polished with a non-abrasive wood furniture polish as needed.
  • Cura de l'antena: Ensure the external FM antenna is not bent or damaged.

Resolució de problemes

  • Sense energia: Ensure the power supply is securely connected to both the radio and a working electrical outlet.
  • Mala recepció de ràdio:
    • Verify the external FM antenna is properly connected and fully extended.
    • Reposition the radio or antenna to improve signal strength.
    • Comproveu si hi ha interferències locals d'altres dispositius electrònics.
  • Problemes de vinculació de Bluetooth:
    • Ensure the radio is set to "BT" mode and the indicator light is flashing.
    • Assegureu-vos que el Bluetooth del dispositiu estigui activat i que estigui dins del seu abast.
    • Si ja l'havies emparellat prèviament, intenta "oblidar-te" del dispositiu al telèfon i tornar-lo a emparellar.
  • No hi ha so des de l'entrada auxiliar:
    • Confirmeu que la ràdio està configurada en mode "AUX".
    • Check the audio cable connection at both the radio and the external device.
    • Ensure the volume on both the radio and the external device is turned up.

Especificacions

MarcaTivoli Audio
Número de modelM1BTWHT
Dimensions del producte8.3" de llargada x 5.2" d'amplada x 4.4" d'alçada (21.1 x 13.2 x 11.2 cm)
Pes de l'article4.1 lliures (1.86 kg)
Tecnologia de connectivitatBluetooth
Tecnologia del sintonitzadorAM/FM analògic
Bandes de ràdio compatiblesAM/FM
Font d'alimentacióAC (120V~60Hz)
Característiques especialsAuxiliary input, Stereo headphone output, Sensitive AM/FM analog tuner with large 5:1 ratio tuning dial
Tivoli Audio Model One radio with dimensions labeled: 8.3 inches length, 5.2 inches width, 4.4 inches height
Figure 4: Product dimensions for the Model One BT radio.

Garantia i Suport

For warranty information, product support, or service inquiries, please refer to the included Owner's Manual or visit the official Tivoli Audio weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.

© 2025 Tivoli Audio. Tots els drets reservats.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.