Dorman 82364 Exterior Door Handle Installation and Maintenance Guide

1. Producte acabatview

The Dorman 82364 Exterior Door Handle is a direct replacement part designed to match the fit and appearance of the original handle on specific Nissan vehicles. This handle is made from alloy steel and features a smooth black finish.

1.1 Compatibilitat

This part is compatible with the following vehicles:

• Nissan Tiida: 2007, 2008, 2009, 2010, 2011, 2012
• Nissan Versa: 2007, 2008, 2009, 2010, 2011

Important: Always verify fitment using your vehicle's specific year, make, and model before installation. This handle is position-specific; ensure you have the correct handle for the intended door position (e.g., front right).

2. Contingut del paquet

The Dorman 82364 package includes:

• One (1) Dorman 82364 Exterior Door Handle (Front Right, Black, without Smart Entry System, without keyhole)

Imatge: Superior view of the Dorman 82364 Exterior Door Handle, showing its smooth black finish and overall shape.

3. Instal·lació (Configuració)

Installation of an exterior door handle typically requires basic automotive tools and some mechanical aptitude. If you are unsure about any step, it is recommended to seek professional assistance.

3.1 Eines necessàries (no incloses)

• Tornavisos (Phillips i cap pla)
• Joc de claus de sòcol
• Eina d'eliminació de panells de retall
• Guants (per a la protecció)

3.2 Passos generals d'instal·lació

1. Preparar el vehicle: Park the vehicle on a level surface and engage the parking brake. Ensure the door where the handle will be replaced is accessible.
2. Remove Door Panel: Carefully remove the interior door panel. This usually involves removing screws, clips, and disconnecting electrical connectors for windows, locks, and mirrors. Use a trim panel removal tool to avoid damage.
3. Access Old Handle: Locate the mounting points and linkage rods connected to the existing exterior door handle from inside the door cavity.
4. Desconnectar l'enllaç: Disconnect the linkage rods and any electrical connectors (if present) from the old handle.
5. Treure la nansa antiga: Unscrew or unclip the old exterior door handle from the door frame. Carefully pull it out.
6. Instal·leu una nova maneta: Insert the Dorman 82364 handle into the opening. Ensure it seats correctly.
7. Connect Linkage: Reconnect the linkage rods and any electrical connectors to the new handle. Test the handle's operation to ensure it opens and closes the door latch correctly before fully securing.
8. Secure New Handle: Fasten the new handle to the door frame using the appropriate screws or clips.
9. Reinstall Door Panel: Reconnect all electrical connectors and reattach the interior door panel, ensuring all clips and screws are properly secured.
10. Prova final: Test the new door handle's functionality from both inside and outside the vehicle.

Imatge: Anglesa view of the Dorman 82364 Exterior Door Handle, showing the handle and its separate end cap component.

4. Funcionament

Once properly installed, the Dorman 82364 Exterior Door Handle operates identically to the original equipment handle. Pull the handle outwards to disengage the door latch and open the door. Release the handle to allow it to return to its closed position.

Ensure the handle moves freely and returns to its resting position without sticking. If the handle feels stiff or does not return properly, re-check the linkage connections and mounting.

5. Manteniment

The Dorman 82364 Exterior Door Handle is designed for durability and requires minimal maintenance.

• Neteja: Clean the handle periodically with standard automotive cleaning products. Avoid abrasive cleaners or solvents that could damage the finish.
• Lubricació: If the handle mechanism feels stiff over time, a small amount of silicone-based lubricant can be applied to the moving parts of the internal mechanism (accessible by removing the door panel). Avoid petroleum-based lubricants as they can attract dirt.
• Inspecció: Periodically inspect the handle for any signs of damage, cracks, or loose connections. Address any issues promptly to prevent further damage or malfunction.

6. Solució De Problemes

7. Especificacions

• Número de model: 82364
• Marca: Dorman
• Material: Acer d'aliatge
• Color: Negre
• Acabat exterior: Mecanitzat
• Pes de l'article: 0.01 Ounces (approximately)
• Dimensions del producte: 8.9 x 4.37 x 2.56 polzades (aproximadament)
• UPC: 037495823647
• Números de peça OEM: 82364; 80640-1HL0A; 80640-EL12A; 82640-EL12A; 82646-1HL0A; 82646-EL12B

Imatge: Part posterior view of the Dorman 82364 Exterior Door Handle, showing the mounting points and internal structure.

8. Garantia i Suport

For information regarding warranty coverage and customer support, please refer to the official Dorman Products website or contact their customer service directly. Dorman Products has over 100 years of experience providing quality automotive replacement parts.

Fabricant: Productes Dorman

Weblloc: www.dormanproducts.com