WAC Lighting TK-103LED Line Voltage Track Head Instruction Manual

1. Introducció

This manual provides detailed instructions for the safe installation, operation, and maintenance of your WAC Lighting TK-103LED Line Voltage Track Head with 8W GU10 LED Bulb. Please read all instructions carefully before installation and retain this manual for future reference. This product is designed for indoor use only.

2. Informació de seguretat

ADVERTIMENT: Per reduir el risc d'incendi, descàrrega elèctrica o lesions a les persones, tingueu en compte el següent:

• Assegureu-vos que l'alimentació estigui apagada a l'interruptor automàtic abans de la instal·lació o el manteniment.
• Totes les connexions elèctriques han de complir els codis locals, les ordenances o el Codi Elèctric Nacional (NEC). Consulteu un electricista qualificat si no esteu familiaritzat amb les connexions de cablejat elèctric correctes.
• No instal·leu aquest aparell en llocs humits o secs.amp locations. This product is rated for dry locations only.
• No intenteu alterar ni modificar l'aparell. Qualsevol alteració pot anul·lar la garantia i crear un perill per a la seguretat.
• Advertència de la proposta 65: Aquest producte pot contenir productes químics coneguts a l’Estat de Califòrnia per causar càncer i defectes congènits o altres danys reproductius.

3. Producte acabatview

The WAC Lighting TK-103LED is a line voltage track head designed for use with 120V track systems. It features a durable formed metal construction with a polycarbonate track adaptor and includes an 8W GU10 LED bulb. The fixture offers versatile aiming with 350-degree horizontal rotation and 90-degree vertical tilt, allowing for precise light direction.

Figura 1: Dimensions del producte
This diagram illustrates the dimensions of the WAC Lighting TK-103LED track head. The fixture measures approximately 4 11/16 inches in height when pointed downwards, and 5 7/16 inches when angled. The base width is 3 1/16 inches. The track adapter section is 1 3/8 inches wide and 1 1/8 inches high. The light head itself is 2 5/8 inches deep.

4. Configuració i instal·lació

This track head is designed for ceiling mount installation on 120V track systems. It is compatible with H, J/J2, and L track configurations. Ensure you have the correct track type for your installation.

4.1 Components inclosos

• Track fixture (with pre-installed 8W GU10 LED bulb)
• Instruccions d'instal·lació

4.2 Passos d'instal·lació

1. Apagueu l'alimentació: Before beginning installation, ensure the power to the track system is completely OFF at the circuit breaker.
2. Identify Track Type: Verify your track system is a 120V H, J/J2, or L type track. The track head adaptor is designed to fit these specific types.
3. Insert Track Head: Align the track head adaptor with the track slot. Push the adaptor firmly into the track and twist it to lock it into place. Ensure the electrical contacts on the adaptor engage properly with the track conductors.
4. Fixació segura: Tighten any aiming screws or locking mechanisms on the track adaptor to secure the fixture's position on the track.
5. Restaura l'alimentació: Un cop instal·lat el dispositiu de manera segura, restableu l'alimentació a l'interruptor.

5. Funcionament

5.1 Aiming the Light

The TK-103LED track head allows for flexible light direction. You can rotate the fixture 350 degrees horizontally and tilt it 90 degrees vertically to illuminate your desired area. Loosen the aiming screws slightly, adjust the fixture, and then re-tighten the screws to secure its position.

5.2 Atenuació

This fixture is designed for smooth and continuous dimming from 100% down to 1% when used with an electronic low voltage (ELV) dimmer. For optimal performance and to avoid flickering, ensure your dimmer switch is compatible with LED lighting and specifically with ELV dimming protocols.

6. Manteniment

6.1 Neteja

To clean the fixture, ensure power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.

6.2 Re-Lamping (Bulb Replacement)

The TK-103LED track head uses a GU10 LED bulb. While the included LED bulb has a long lifespan, it can be replaced if necessary. The fixture is designed for easy re-lamping from the front without the use of tools. To replace the bulb:

1. Desconnecteu l'alimentació de l'aparell a l'interruptor.
2. Carefully grasp the decorative glass shade or the bulb itself and twist counter-clockwise to remove the GU10 bulb.
3. Insert a new GU10 LED bulb by aligning the pins with the socket holes and twisting clockwise until secure.
4. Restaura l'alimentació a l'aparell.

7. Solució De Problemes

8. Especificacions

• Marca: Il·luminació WAC
• Número de model: LTK-103LED-BK
• Color: Negre
• Material: Aluminum (fixture), Glass (shade)
• Estil: L Track (compatible with H, J/J2 track types)
• Usos específics: Només per a ús interior
• Font d'alimentació: AC
• Font de llum: LED
• Nombre de fonts de llum: 1
• Voltage: 120 Volts
• Wattage: 8 watts
• Base de la bombeta: GU10
• Tipus d'interruptor: Dimmer compatible (ELV LED)
• Brillantor: 470 lumens
• Tipus de muntatge: Muntatge al sostre
• Dimensions de l'article (L x A x A): 2.63" x 3.63" x 5.44" (Note: Height varies with aiming, refer to Figure 1 for detailed dimensions)
• Pes de l'article: 4.32 unces
• UPC: 790576225050

9. Garantia i assistència

9.1 Garantia del fabricant

WAC Lighting provides a warranty for this product: 5 years for functional components and 2 years for the finish. Please retain your proof of purchase for warranty claims.

9.2 Atenció al client

For technical assistance, replacement parts, or warranty inquiries, please contact WAC Lighting customer support. Refer to the WAC Lighting weblloc web o l'embalatge del producte per obtenir informació de contacte actualitzada.