Oxford OF690Z Heaterz Premium Adventure Heated Handlebar Grips Instruction Manual

1. Introducció

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Oxford OF690Z Heaterz Premium Adventure Heated Handlebar Grips. Designed specifically for adventure motorcycles, these grips offer enhanced comfort and control in various weather conditions. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Image: Oxford OF690Z Heaterz Premium Adventure Heated Handlebar Grips, showing the ergonomic design and integrated Oxford branding.

Les característiques clau inclouen:

• Ergonomically engineered surface structures for optimized riding performance.
• Thicker rubber in high-wear areas, rhombus tread patterns for grip, and diamond tread for maximum grip.
• Silicon cables for flexibility in cold weather and winter-grade wiring to prevent cracking.
• Bonded grip design for durability and vibration absorption.
• Angled silicone wires to prevent water ingress and corrosion.
• Five heat settings for precise temperature control.
• Intelligent heat controller with battery saving mode (shuts off if voltage drops to 10.5V).
• Easy installation with plug-and-play connectors.

2. Informació de seguretat

Always prioritize safety during installation and operation. Failure to follow these instructions may result in damage to the product, motorcycle, or personal injury.

• Ensure the motorcycle's ignition is OFF and the battery is disconnected before beginning installation.
• No modifiqueu el cablejat ni els components.
• Verifiqueu que totes les connexions estiguin ben fixades i correctament aïllades per evitar curtcircuits.
• Avoid routing cables near hot engine parts or moving components.
• Do not operate the grips if they are damaged or if any wiring is exposed.
• Monitor de vol de la bateriatage, especially during prolonged use with the engine off, to prevent battery drain. The intelligent controller includes a low-voltage cut-off feature.
• Always wear appropriate riding gear, including gloves, even when using heated grips.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents al paquet abans de començar la instal·lació:

Image: Retail packaging for Oxford Heaterz Premium Adventure Heated Grips, showing the product box.

Image: Diagram illustrating the components included in the Oxford Heaterz OF690Z package.

1. Heated Grips (Left and Right) x 1 pair
2. Intelligent Heat Controller x 1
3. Wiring Harness (with 5A fuse) x 1
4. Switch Mounting Bracket x 1
5. Switch Mounting Adhesive Tape x 1
6. Grip Adhesive x 1 tube
7. Cable Ties (various sizes) x 4

4. Instal·lació

This section outlines the steps for installing the Oxford OF690Z Heaterz. Basic mechanical skills are recommended. If you are unsure, consult a qualified technician.

4.1 Preparació

• Ensure the motorcycle is stable on its stand.
• Disconnect the motorcycle battery (negative terminal first).
• Remove existing handlebar grips. This may require cutting or carefully prying them off. Clean the handlebar surfaces thoroughly, removing any old adhesive or residue.
• For the throttle side, ensure the plastic throttle sleeve is smooth and free of raised fins that might interfere with the new grip. Shave down any such fins if present.

4.2 Grip Installation

1. Apply a thin, even layer of the supplied grip adhesive to the clean handlebar and throttle sleeve surfaces. Work quickly as the adhesive may set fast.
2. Slide the appropriate heated grip onto each side. The throttle grip is typically slightly larger in internal diameter. Ensure the grips are fully seated and oriented correctly.
3. Allow the adhesive to cure according to its instructions (typically several hours) before proceeding.

4.3 Cablejat del sistema

The Oxford Heaterz feature a simplified wiring system. Refer to the wiring diagram provided in the package contents image for visual guidance.

1. Connect the wiring harness: The harness has two ring connectors for direct connection to the motorcycle battery terminals (positive and negative).
2. Route the wiring harness carefully, avoiding moving parts, sharp edges, and heat sources. Secure it with the provided cable ties.
3. Connect the heated grips to the wiring harness using the plug-and-play connectors. Ensure a secure connection.
4. Connect the Intelligent Heat Controller to the wiring harness.

4.4 Muntatge del controlador

Mount the Intelligent Heat Controller in a convenient and accessible location on your handlebars.

1. Attach the switch mounting bracket to your handlebars using the provided hardware.
2. Secure the Intelligent Heat Controller to the bracket using the adhesive tape or other suitable method. Ensure it is firmly attached and does not obstruct other controls.

4.5 Comprovacions finals

• Double-check all wiring connections for security and proper insulation.
• Ensure grips rotate freely on the throttle tube without binding.
• Reconnect the motorcycle battery (positive terminal first, then negative).
• Test the system before riding.

5. Funcionament

The Intelligent Heat Controller allows for precise temperature management.

Image: The Intelligent Heat Controller, showing the control buttons and heat level indicators.

5.1 Encesa/apagada

• To turn on: Press and hold either the '+' or '-' button for approximately 2 seconds. The controller will illuminate, indicating the current heat setting.
• To turn off: Press and hold either the '+' or '-' button for approximately 2 seconds until the lights extinguish.

5.2 Ajust de la configuració de calor

The controller offers five heat settings, indicated by illuminated LEDs:

• Press the '+' button to increase the heat level.
• Press the '-' button to decrease the heat level.
• Available settings: 30%, 40%, 50%, 75%, 100%.

5.3 Mode d'estalvi de bateria

The Intelligent Heat Controller features a battery saving mode. If the motorcycle's battery voltage drops below 10.5 Volts, the system will automatically shut off to prevent complete battery discharge, ensuring the motorcycle can still start.

6. Manteniment

Proper maintenance ensures the longevity and performance of your heated grips.

• Neteja: Netegeu les empunyadures i el controlador amb anunciamp drap i sabó suau. Eviteu productes químics agressius o netejadors abrasius.
• Inspecció: Regularly inspect the grips for wear, tears, or damage. Check all wiring for fraying, cracks, or loose connections.
• Gestió de cables: Ensure all cables remain securely fastened and away from moving parts or heat sources. Replace cable ties if they become brittle or break.
• Emmagatzematge: If storing the motorcycle for an extended period, ensure the heated grips are turned off. Consider disconnecting the battery if the motorcycle will be unused for several weeks.

7. Solució De Problemes

If you encounter issues with your Oxford Heaterz, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Oxford customer support.

8. Especificacions

Image: Diagram showing the dimensions of the Oxford heated grips.

9. Garantia i Suport

For warranty information, please refer to the documentation included with your product or visit the official Oxford Products website. For technical support or assistance with troubleshooting beyond the scope of this manual, please contact Oxford customer service.

Informació de contacte:

• Weblloc: www.oxfordproducts.com
• Refer to your product packaging for specific regional contact details.