Kichler Everly Single Light Bell Pendant Light Fixture (Model 42046CH)

Introducció

This manual provides instructions for the safe installation, operation, and maintenance of your Kichler Everly Single Light Bell Pendant Light Fixture, Model 42046CH. Please read all instructions carefully before beginning installation.

The Kichler Everly pendant light fixture features a bell-shaped clear glass shade and a chrome finish. It is designed for indoor use in areas such as kitchen islands, dining rooms, or living spaces. The fixture measures 13.75 inches in width and 20.25 inches in height.

Informació de seguretat

Per reduir el risc d'incendi, descàrrega elèctrica o lesions personals, seguiu sempre aquestes precaucions de seguretat bàsiques:

• Always turn off the electrical supply at the main fuse box or circuit breaker before installation, cleaning, or maintenance.
• Consult a qualified electrician if you are unsure about the installation process or have questions regarding electrical wiring.
• All wiring connections must be in accordance with local and national electrical codes.
• No supereu la potència màximatage specified for the bulb (100 watts).
• Aquest aparell està dissenyat només per a ús interior. No l'instal·leu en llocs humits o secs.amp ubicacions.
• Avís de la Proposició 65: Aquest producte pot contenir substàncies químiques que l'estat de Califòrnia sap que causen càncer i defectes congènits o altres danys reproductius.

Contingut del paquet

Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, do not attempt to install the fixture and contact customer service.

• 1 Glass Shade
• Adjustable Stems (2 x 12-inch, 2 x 6-inch)
• Dosser
• Maquinari de muntatge
• Manual d'instruccions

Note: Bulb is sold separately. The fixture requires one E26 Medium base incandescent bulb, up to 100 watts.

Especificacions

Configuració i instal·lació

This section guides you through the installation of your pendant light fixture. Professional installation is recommended if you are not familiar with electrical wiring.

Pas 1: prepareu-vos per a la instal·lació

Before starting, ensure the power supply to the installation area is turned off at the main fuse box or circuit breaker. Unpack all components and inspect them for any damage. Keep all packaging materials until installation is complete.

Pas 2: Fixeu el suport de muntatge

Secure the provided mounting bracket to the ceiling junction box using the screws supplied. Ensure the bracket is firmly attached and level.

This image shows the canopy and the top portion of the hanging rod, illustrating how the fixture connects to the ceiling mounting point.

Step 3: Adjust Hanging Height

The fixture includes two 12-inch stems and two 6-inch stems. Select the appropriate combination of stems to achieve your desired hanging height. Thread the electrical wires through the chosen stems and the canopy. Ensure the wires are not pinched.

This image illustrates how multiple pendant lights can be hung at varying heights using the adjustable stems to suit your space.

Pas 4: feu connexions elèctriques

Connect the fixture's wires to the house wires according to local and national electrical codes. Typically, connect the black wire from the fixture to the black (hot) wire from the ceiling, the white wire from the fixture to the white (neutral) wire from the ceiling, and the ground wire to the ground wire. Secure all connections with approved wire nuts and ensure no bare wire strands are exposed.

Step 5: Secure Canopy and Glass Shade

Carefully push the canopy up to the ceiling, covering the junction box and wiring. Secure it in place with the provided screws. Then, slide the glass shade over the bulb socket and secure it according to the fixture's design (e.g., with a threaded ring or small screws). Install the appropriate E26 Medium base bulb (not included).

This image displays the fully assembled Kichler Everly pendant light fixture, showcasing the clear glass shade and chrome finish.

Vídeos d'instal·lació

For additional visual guidance, please refer to the following official installation videos:

Instruccions de funcionament

Once the Kichler Everly pendant light fixture is correctly installed and power is restored to the circuit, operate the light using the standard wall switch connected to the fixture's electrical circuit.

The fixture is designed for one E26 Medium base incandescent bulb, up to 100 watts. You can choose a bulb that provides your desired light temperature and brightness to complement your room's ambiance.

Manteniment

Regular cleaning will help maintain the appearance and performance of your Kichler Everly pendant light fixture.

• Desconnecteu sempre l'alimentació de l'aparell a l'interruptor automàtic abans de netejar-lo.
• For the glass shade, gently wipe with a clean, lint-free cloth. If necessary, use a mild glass cleaner applied to the cloth first, not directly to the fixture.
• For the chrome finish, wipe with a soft, dry, lint-free cloth.
• Avoid using abrasive cleaners, scouring pads, or cleaning products containing ammonia or alcohol, as these can damage the finish and glass.

Resolució de problemes

Si teniu problemes amb el llum penjant, consulteu els passos habituals següents per resoldre problemes:

La llum no s'encén:

• Check that the power supply is on at the main circuit breaker.
• Ensure the bulb is correctly installed and not burnt out. Replace if necessary.
• Verifiqueu que totes les connexions elèctriques estiguin segures i correctament aïllades.

Llum intermitent:

• Check the bulb for proper seating in the socket.
• Assegureu-vos que la bombeta vagitage is compatible with the fixture's specifications (max 100W).
• Inspect wiring connections for any looseness.

Fixture is loose or wobbles:

• Tighten any visible mounting screws in the canopy.
• Ensure the mounting bracket is securely attached to the ceiling junction box.

Informació de la garantia

The Kichler Everly Single Light Bell Pendant Light Fixture (Model 42046CH) is covered by a manufacturer's limited warranty for one (1) year from the date of purchase. This warranty covers defects in materials and workmanship under normal use and service.

This warranty does not cover damage resulting from improper installation, accident, misuse, abuse, or normal wear and tear. For warranty claims or further details, please retain your proof of purchase and contact Kichler customer service.

Atenció al client

If you require further assistance, have questions not covered in this manual, or need to report a missing or damaged part, please visit the official Kichler weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.

Visit Kichler's Official Weblloc