Philips 17W 24in T8 Bright White Fluorescent Tube User Manual

Introducció

This manual provides essential information for the safe and effective use of your Philips 17W 24in T8 Bright White Fluorescent Tube, Model 280909. Please read these instructions carefully before installation and retain them for future reference.

Informació de seguretat

Risc elèctric: Always disconnect power to the fixture before installing, removing, or servicing the fluorescent tube. Failure to do so may result in electric shock or injury.
Fragile Item: Fluorescent tubes are made of glass and can break. Handle with care to prevent injury.
Contingut de mercuri: This product contains mercury. Dispose of in accordance with local, state, and federal laws. Visit www.epa.gov/mercury per a més informació.
Compatibilitat: Ensure the fluorescent tube is compatible with your fixture's ballast and socket type (G13 Medium Bi-Pin).
Només per a ús interior: Aquesta bombeta està dissenyada per a aplicacions en interiors.

Producte acabatview

The Philips 17W 24in T8 Bright White Fluorescent Tube is designed to provide efficient and bright illumination. It features a T8 bulb shape and a G13 (Medium Bi-Pin) base for standard fluorescent fixtures.

Figure 1: Philips 17W 24in T8 Bright White Fluorescent Tube. This image shows the cylindrical glass tube with bi-pin connectors at each end.

Especificacions

Característica	Detall
Marca	Philips
Número de model	280909
Wattage	17 watts
Mida de la forma del bulb	T8
Base del bulb	G13 (Medium Bi-Pin)
Color clar	Blanc brillant
Temperatura de color	5000 Kelvin
Brillantor	1300 lúmens
Índex de reproducció del color (CRI)	82
Voltage	240 volts (CA)
Longitud	24 polzades
Diàmetre	1 polzades
Vida estimada	24,000 hours (approx. 22.2 years based on 3 hrs/day)
Ús interior/exterior	Interior

Configuració i instal·lació

Desconnexió d'alimentació: Before beginning installation, ensure the power supply to the fluorescent light fixture is completely turned off at the circuit breaker or fuse box.
Treure el tub vell (si escau): If replacing an existing tube, carefully twist the old tube approximately 90 degrees and gently pull it out of the sockets. Dispose of the old tube properly according to local regulations.
Inspeccionar l'aparell: Check the fixture's sockets and wiring for any damage. Ensure the ballast is compatible with T8 fluorescent tubes.
Instal·leu un tub nou: Align the two pins at each end of the Philips T8 fluorescent tube with the slots in the fixture's sockets. Gently push the tube into the sockets until it is fully seated, then twist it approximately 90 degrees until it locks into place. Do not force the tube.
Restaura l'alimentació: Once the tube is securely installed, restore power to the fixture from the circuit breaker.
Prova: Engegueu l'interruptor de la llum per confirmar el funcionament correcte.

If the tube does not light, ensure it is properly seated and twisted into the sockets. If issues persist, refer to the Troubleshooting section.

Instruccions de funcionament

Operating the Philips T8 fluorescent tube is straightforward. Once installed in a compatible fixture with power restored, simply use the fixture's wall switch or integrated switch to turn the light on and off.

Encès instantani: This fluorescent tube is designed for quick illumination.
Rendiment òptim: For optimal performance and lifespan, avoid frequent on/off cycling.

Manteniment

Neteja: To clean the fluorescent tube, ensure the power is off and the tube is cool. Gently wipe the tube with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials, as these can damage the tube.
Substitució: Replace the tube when it reaches the end of its life (indicated by flickering, dimming, or failure to light). Follow the installation instructions in reverse to remove the old tube and install a new one.
Manteniment de fixacions: Periodically inspect the light fixture for dust accumulation, loose wiring, or damaged sockets. Clean the fixture as needed.

Resolució de problemes

Problema	Causa possible	Solució
Tube does not light	Sense poder per fixar Tube not properly seated Faulty tube Faulty ballast or starter (if applicable)	Comproveu l'interruptor/fusible. Ensure tube is twisted and locked into sockets. Replace tube with a new one. Consult a qualified electrician to inspect/replace ballast/starter.
Tube flickers	El tub s'acosta al final de la seva vida útil Connexió fluixa Balast incorrecte	Replace tube. Ensure tube is securely seated. Verify ballast compatibility.
Sortida de llum tènue	El tub s'acosta al final de la seva vida útil Dust/dirt on tube or fixture	Replace tube. Clean tube and fixture.

Informació d'eliminació

This fluorescent tube contains a small amount of mercury. It is important to dispose of it responsibly to protect the environment. Do not dispose of fluorescent tubes in regular household trash.

Reciclatge: Many communities offer recycling programs for fluorescent bulbs. Check with your local waste management authority for recycling options in your area.
Hazardous Waste Facilities: Some areas require fluorescent bulbs to be taken to special household hazardous waste collection sites.
For more information on mercury-containing products and disposal, please visit the U.S. Environmental Protection Agency (EPA) weblloc: www.epa.gov/mercury.

Garantia i Suport

For warranty information and customer support regarding your Philips fluorescent tube, please refer to the documentation provided with your purchase or visit the official Philips lighting website. Philips products are designed for quality and reliability.

Contact Philips: For technical assistance or product inquiries, please visit www.lighting.philips.com or refer to the contact information provided on the product packaging.

Philips 280909