Introducció
The JJC TM-C Multifunction Timer Remote Control is designed to provide advanced shutter release capabilities for compatible DSLR and SLR cameras. This device allows for simple shutter release, as well as complex timed functions such as self-timer, interval timer, long exposure timer, and exposure count settings. It connects to your camera via a wired connection, offering reliable control for various photographic scenarios.
This manual will guide you through the setup, operation, and maintenance of your TM-C remote control.
Característiques clau
- Easy to program for various shooting modes.
- Dos-stage release button for focus and shutter.
- Self-timer function with delays from 0 seconds to 99 hours, 59 minutes, 59 seconds.
- Interval shooting for time-lapse photography.
- Precise long exposure time control.
- Exposure count setting up to 399 or unlimited.
Contingut del paquet
- JJC TM-C Multifunction Timer Remote Control
- Connection Cable (90 cm long)
- Manual d'usuari
Configuració
1. Instal·lació de la bateria
- Localitzeu el compartiment de la bateria a la part posterior del comandament a distància.
- Obriu la tapa del compartiment de la bateria.
- Introduïu dues piles alcalines AAA, assegurant-vos de la polaritat correcta (+/-).
- Tanqueu bé la tapa del compartiment de la bateria.
2. Connexió a la càmera
- Assegureu-vos que la càmera estigui apagada.
- Locate the remote control terminal on your camera. This is typically a 2.5mm jack.
- Connect the 2.5mm plug of the TM-C remote control cable into your camera's remote control terminal.
- Enceneu la càmera.
Nota: Some cameras may require a specific setting in their menu to enable the remote control port. Refer to your camera's instruction manual if the remote does not respond after connection.
The image shows the JJC TM-C remote control unit. It features a large LCD screen for settings, several control buttons, and a coiled cable for connecting to a camera.
Instruccions de funcionament
The TM-C remote control features an LCD display and several buttons for navigation and setting adjustments. The main control button typically functions as a two-stage shutter release: a half-press for autofocus and a full-press for shutter activation.
Basic Shutter Release
- Press the main shutter button halfway to focus.
- Press the main shutter button fully to take a picture.
Funcions del temporitzador
The TM-C allows you to program various timed shooting sequences. Use the directional buttons and SET button to navigate the menu and adjust values on the LCD screen.
- Delay Timer (DELAY): Sets a delay before the first exposure. Adjustable from 0 seconds to 99 hours, 59 minutes, 59 seconds.
- Long Exposure Timer (LONG): Controls the duration of the shutter being open. This is used for bulb mode photography. Adjustable from 0 seconds to 99 hours, 59 minutes, 59 seconds.
Note: For long exposures, your camera must be set to Bulb mode. If your camera does not have a Bulb mode, the longest exposure will be limited by your camera's maximum shutter speed. - Interval Timer (INTVL): Sets the time between consecutive exposures. Adjustable from 1 second to 99 hours, 59 minutes, 59 seconds.
- Number of Exposures (N): Sets the total number of photos to be taken in a sequence. Adjustable from 1 to 399, or set to unlimited.
Consult the on-screen menu and the detailed instructions provided in the included manual for specific programming steps for each function.
Manteniment
- Keep the remote control clean and dry. Use a soft, dry cloth to wipe the surface.
- Eviteu exposar el dispositiu a temperatures extremes, humitat o llum solar directa.
- Si no feu servir el comandament a distància durant un període prolongat, traieu-ne les piles per evitar fuites.
- Handle the connection cable with care to prevent damage to the wires or connectors.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El comandament a distància no s'encén. | Les piles estan gastades o incorrectament inserides. | Replace batteries with fresh AAA alkaline batteries. Check polarity. |
| Camera does not respond to remote. | Incorrect camera settings; cable not fully connected; incompatible camera model. | Ensure camera is on and set to remote control mode (if applicable). Firmly connect the 2.5mm cable. Verify camera compatibility. |
| Issue with long bulb exposures (e.g., >1 minute) and interval shooting. | Potential firmware or operational limitation. | Ensure camera is in Bulb mode. Test with shorter exposures first. If issues persist, contact JJC support. |
| La pantalla LCD està tènue o en blanc. | Potència de bateria baixa. | Substituïu les piles. |
Especificacions
- Model: TM-C
- Marca: JJC
- Color: Negre
- Connectivitat: Cablejat (connector de 2.5 mm)
- Longitud del cable: Uns 90 cm
- Font d'alimentació: 2 x piles alcalines AAA
- Nombre de botons: 7
- Interval del temporitzador: 0s a 99h 59m 59s
- Exposure Count: 1 to 399, or unlimited
- Dispositius compatibles: Cameras (Canon, Contax, Pentax, Samsung models listed below)
Models de càmera compatibles:
- Cànon: EOS 60D, 60Da, 70D, 300D, 350D, 400D, 450D, 500D, 550D, 600D, 650D, 700D, 1000D, 1100D; Powershot G10, G11, G12, G1X, G16.
- Pentax: K3, K100D, K110D, K10D, *ist DS2, K200D, K20D, K7, *ist D, *ist Ds, *ist, *ist DL, MZ-6, ZX-L, MZ-L, *ist DL2, K5, K30.
- Samsung: GX-1L, GX-1S, GX-10, GX-20, NX10, NX100, NX5.
- Contax: 645, N, N1, NX, N Digital.
Garantia i Suport
JJC products typically come with a limited warranty. Please refer to the warranty card included with your product or visit the official JJC website for detailed warranty terms and conditions. For technical support, troubleshooting assistance, or inquiries about replacement parts, please contact JJC customer service through their official channels.
