PELONIS FS40-8JR 16-Inch 3-Speed Oscillating Pedestal Fan

Instruccions importants de seguretat

Please read and save these important safety instructions before using this fan. Failure to follow these instructions may result in electric shock, fire, or serious personal injury.

• Desendolleu sempre el ventilador abans de netejar-lo o fer-ne el manteniment.
• No feu funcionar cap ventilador amb un cable o un endoll danyats.
• Mantingueu el ventilador allunyat de l'aigua i la humitat.
• Assegureu-vos que el ventilador estigui col·locat sobre una superfície estable i anivellada per evitar que bolqui.
• No introduïu els dits ni cap objecte a través de la reixeta quan el ventilador estigui en funcionament.
• Aquest ventilador és només per a ús interior.

Producte acabatview

The PELONIS FS40-8JR is a 16-inch oscillating pedestal fan designed to provide efficient airflow and cooling in various indoor environments. Its adjustable height and wide-angle oscillation ensure comprehensive air distribution.

Figure 1: PELONIS FS40-8JR Pedestal Fan. This image displays the complete fan assembly, highlighting its white finish, the protective grille, fan blades, central control panel, the adjustable stand with a remote control holder, and the stable round base.

Característiques principals:

• Wide-angle oscillation and tilt for broad air coverage.
• Convenient 4-hour timer function.
• Remote control with a dedicated holder for easy access.
• Adjustable height to suit different cooling needs.
• Stable round base for secure placement.
• Three-speed settings (Low, Medium, High).

Llista de peces

Before assembly, ensure all parts are present and undamaged. Refer to the diagram in the Product Overview section for visual identification.

• Reixa frontal
• Reixa posterior
• Pales de ventilador
• Carcassa del motor
• Tauler de control
• Pal de suport ajustable
• Base Rodona
• Control remot
• Titular de control remot
• Fasteners (nuts, screws, washers - specific types may vary)

Muntatge i muntatge

Minimal assembly is required to set up your PELONIS pedestal fan. Follow these steps carefully:

1. Muntar la base: Attach the adjustable stand pole securely to the round base using the provided fasteners. Ensure it is stable and upright.
2. Attach Motor Housing: Mount the motor housing onto the top of the adjustable stand pole. Secure it firmly.
3. Install Rear Grille: Place the rear grille onto the motor housing, aligning it correctly.
4. Mount Fan Blades: Carefully slide the fan blades onto the motor shaft. Secure them with the retaining cap or nut.
5. Attach Front Grille: Position the front grille over the fan blades and secure it to the rear grille using the clips or screws provided. Ensure the grille is fully closed and locked for safety.
6. Inseriu les piles del comandament a distància: Open the battery compartment on the remote control and insert 3 AAA batteries (not included), observing polarity.
7. Attach Remote Holder: Clip the remote control holder onto the adjustable stand pole at a convenient height.

Once assembled, place the fan on a firm, level surface and plug it into a standard electrical outlet.

Instruccions de funcionament

Your PELONIS fan can be operated using the control panel on the fan unit or the included remote control.

Funcions del tauler de control:

• Encès/apagat: Press the "ON/OFF" button to turn the fan on or off.
• Control de velocitat: Press the "SPEED" button repeatedly to cycle through Low (L), Medium (M), and High (H) speed settings.
• Temporitzador: Press the "TIMER" button to set the fan to operate for a specific duration (e.g., 1, 2, 4 hours). The fan will automatically turn off after the set time.
• Oscil·lació: Press the "OSC" button (if present on the panel, otherwise use remote) to activate or deactivate the oscillation function, allowing the fan head to sweep from side to side.

Funcions de control remot:

The remote control provides convenient operation from a distance. Ensure the remote is pointed towards the fan's control panel for optimal response.

• Botó d'encesa: Encén o apaga el ventilador.
• Botons de velocitat: Separate buttons for Low, Medium, and High speeds, or a single button to cycle through them.
• Botó del temporitzador: Configura el temporitzador de funcionament.
• Botó d'oscil·lació: Activa o desactiva la funció d'oscil·lació.

Ajust d'alçada i inclinació:

• Alçada: Loosen the height adjustment knob on the stand pole, raise or lower the fan to the desired height, and then tighten the knob securely.
• Inclinació: Gently push the fan head up or down to adjust the vertical angle of airflow.

Manteniment i Neteja

Una neteja i un manteniment regulars ajudaran a garantir la longevitat i el rendiment òptim del ventilador.

• Desconnecta sempre el ventilador de la presa de corrent abans de netejar-la.
• Neteja exterior: Utilitzeu un suau, damp drap per netejar les superfícies exteriors del ventilador. No utilitzeu productes de neteja abrasius ni dissolvents.
• Neteja de reixes: Dust and lint can accumulate on the grilles and blades. Periodically remove the front grille (refer to assembly instructions in reverse) to clean the fan blades and inside of the grilles with a soft cloth or vacuum cleaner. Ensure all parts are dry before reassembling.
• Emmagatzematge: Quan no l'utilitzeu durant períodes prolongats, guardeu el ventilador en un lloc fresc i sec, preferiblement en el seu embalatge original, per protegir-lo de la pols i els danys.

Resolució de problemes

Si teniu problemes amb el ventilador, consulteu la taula següent per conèixer els problemes i les solucions més habituals.

Especificacions

Garantia i Suport

For warranty information or technical support, please refer to the warranty card included with your product or visit the official PELONIS website. You may also contact customer service for assistance with product operation, parts, or troubleshooting beyond this manual.

Contacte d'atenció al client: Please refer to the contact information provided on the product packaging or the manufacturer's official weblloc.