Field Tuff AS-125ATV12 Hitch Mount Grass Seed Spreader Instruction Manual

1. Introducció

This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your Field Tuff AS-125ATV12 Hitch Mount Grass Seed Spreader. This spreader is designed for use with ATVs, UTVs, or utility tractors, offering a 12-foot broadcast width and a powerful 12-volt DC motor for spreading grass seed, fertilizer, small grain, or road salt.

2. Informació de seguretat

WARNING: Read and understand all safety instructions before operating this equipment.

• Always wear appropriate personal protective equipment (PPE), including eye protection and gloves, when operating the spreader or handling materials.
• Ensure the spreader is securely mounted to your vehicle before use.
• Do not exceed the maximum weight capacity of 125 lbs (16 gallons) for the hopper.
• Keep hands, feet, and clothing clear of all moving parts, especially the spinner plate, during operation.
• Never allow children or untrained individuals to operate the spreader.
• Disconnect power to the spreader before performing any maintenance or adjustments.
• Operate the vehicle at a safe and consistent speed. Refer to material application charts for recommended speeds.

3. Llista de peces

The following components are included in your Field Tuff AS-125ATV12 package. Please verify all parts are present before assembly.

Figure 1: Carton Contents. Includes Hopper Assembly, Crossbeam Tube Assembly, Connecting Rods, Extension Tube, Spacer Plate, Gauge Base Plate, Connecting Tube, various fasteners, and a Rain Cover.

4. Muntatge i muntatge

Follow these steps to properly assemble and mount your spreader.

1. Attach Frame to Hopper: Securely attach the spreader frame to the hopper using the provided hardware. Ensure all screws are tightened by hand to avoid stripping.
2. Mount Spreader to ATV/UTV: Position the assembled spreader onto your ATV, UTV, or utility tractor's 1.75-inch to 2-inch receiver. Use the supplied U-brackets to firmly secure the spreader frame to the vehicle's rack.
3. Mount Spreader Adjustment Handle: Attach the spreader adjustment handle to the frame in an easily accessible location.
4. Connecteu l'arnès de cablejat: Connect the on/off switch wiring harness to the spreader's 12-volt DC motor. Ensure connections are secure.
5. Instal·leu la coberta de pluja: Place the durable rain cover over the hopper to protect materials from adverse elements and increase the spreader's longevity.

Figure 2: Spreader mounted on an ATV with rain cover installed.

5. Instruccions de funcionament

Proper operation ensures effective spreading and prolongs the life of your equipment.

1. Preparació del material: Fill the hopper with your desired material (grass seed, fertilizer, etc.). Break up any clumps to ensure smooth flow.
2. Ajustar el cabal: Use the adjustment handle to set the desired flow rate for your material. Refer to the material's packaging for recommended settings.
3. Inici del vehicle: Begin moving your ATV, UTV, or tractor at a consistent, appropriate speed before activating the spreader.
4. Activate Spreader: Flip the on/off switch to activate the 12-volt DC motor, which will begin spinning the broadcast plate at 570 RPM to distribute the material.
5. Mantenir la velocitat: Drive in a pattern that ensures even coverage, utilizing the 12-foot broadcast width. Avoid sudden stops or turns while the spreader is active.
6. Deactivate Spreader: When finished or when turning, close the flow gate and turn off the power switch.

Figure 3: Spreader in action, distributing material from the rear of an ATV.

6. Manteniment

Regular maintenance ensures optimal performance and extends the lifespan of your spreader.

• Neteja: After each use, thoroughly clean the hopper, spinner plate, and all moving parts to prevent material buildup and corrosion. Use water and a mild detergent, then rinse and dry completely.
• Lubricació: Periodically lubricate any moving metal parts, such as the spinner shaft, to ensure smooth operation.
• Inspecció: Regularly inspect all bolts, nuts, and connections for tightness. Check the wiring harness for any signs of wear or damage.
• Emmagatzematge: Store the spreader in a dry, covered area when not in use. Ensure the rain cover is in place to protect the hopper.

7. Solució De Problemes

If you encounter issues with your spreader, refer to the following common problems and solutions:

8. Especificacions

• Número de model: AS-125ATV12
• Marca: Toba de camp
• Pes de l'article: 50 lliures
• Dimensions del producte: 30.1 x 18.7 x 20.1 polzades (L x A x A)
• Capacitat de la tremuja: 125 lbs / 16 gallons
• Broadcast Width: 12 peus
• Motor: 12 volts CC
• Velocitat nominal: 570 RPM
• Material: Plastic (hopper), Powder Coated (frame)
• Tipus de servei de vehicles: ATV, UTV, Utility Tractor
• Hitch Compatibility: 1.75-inch to 2-inch receiver
• UPC: 832830002394

9. Garantia i Suport

This product is backed by Field Tuff. For warranty claims, technical support, or replacement parts, please contact the manufacturer directly. Refer to your purchase documentation for specific warranty terms and contact information.

Atenció al client: Per obtenir ajuda, visiteu el Field Tuff Store on Amazon or contact Northern Tool + Equipment, the seller, for support.

Devolucions: This product typically includes a 30-day easy return policy. Please check with your retailer for specific return details.