Kendal Lighting AC18250-WH

Kendal Lighting AC18250-WH The Novo Ceiling Fan Instruction Manual

Model: AC18250-WH | Brand: Kendal Lighting

Producte acabatview

The Kendal Lighting AC18250-WH The Novo Ceiling Fan is designed to provide efficient air circulation and integrated lighting for your living space. This model features a white finish, four white blades with a 50-inch span, and an integrated 3-tier light kit. It comes with a full-function remote control for convenient operation.

Kendal Lighting AC18250-WH The Novo Ceiling Fan in white

Image: The Novo Ceiling Fan, showcasing its white finish, four blades, and integrated light kit.

Configuració i instal·lació

Una instal·lació correcta és crucial per al funcionament segur i eficient del ventilador de sostre. Es recomana que la instal·lació la realitzi un electricista qualificat.

Llista de comprovació de components:

  • Muntatge del motor del ventilador de sostre
  • Pales de ventilador (4)
  • Muntatge del kit de llum
  • Light Bulbs (1 x 75w G9, plus 1 extra)
  • Comandament a distància i receptor
  • Maquinari de muntatge

Passos d'instal·lació (generals):

  1. La seguretat primer: Assegureu-vos que l'alimentació estigui desconnectada al disjuntor abans de començar la instal·lació.
  2. Suport de muntatge: Securely attach the mounting bracket to a ceiling joist or an approved fan brace.
  3. Cablejat: Connect the fan's electrical wires to the household wiring according to local electrical codes. Ensure the remote receiver is properly wired.
  4. Assemble Fan: Connecteu el conjunt del motor del ventilador al suport de muntatge.
  5. Instal·leu les fulles: Fixeu fermament les quatre pales del ventilador a la carcassa del motor.
  6. Instal·lació del kit de llums: Connect and secure the integrated 3-tier light kit to the fan motor assembly. Install the provided G9 light bulbs.
  7. Prova: Restableix l'alimentació i prova el funcionament del ventilador i la llum amb el comandament a distància.

Instruccions de funcionament

Your Novo Ceiling Fan comes with a full-function remote control for convenient operation of both the fan and the integrated light kit.

Funcions de control remot:

  • Ventilador activat / desactivat: Premeu per encendre o apagar el ventilador.
  • Control de velocitat del ventilador: Adjust fan speed (typically low, medium, high).
  • Llum encès/apagat: Premeu per encendre o apagar el kit de llums.
  • Atenuació de la llum: Mantingueu premut el botó de la llum per atenuar o il·luminar la llum (si s'utilitzen bombetes regulables).
  • Funció inversa: (If applicable) Changes the direction of blade rotation for summer (downward airflow) or winter (upward airflow) use. Refer to your remote's specific buttons.

Assegureu-vos que el comandament a distància tingui piles noves per a un rendiment òptim.

Manteniment

Un manteniment regular ajuda a garantir la longevitat i el rendiment òptim del teu ventilador de sostre.

Neteja:

  • Pales de ventilador: Dust the fan blades regularly with a soft, lint-free cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
  • Carcassa del motor: Netegeu la carcassa del motor amb un drap suau iamp tela.
  • Kit de llum: Clean the light kit and glass shades with a mild glass cleaner and a soft cloth.

Substitució de bombetes:

The integrated light kit uses G9 75w T4 120v Halogen bulbs. When replacing, ensure the power is off at the circuit breaker and allow the bulb to cool before handling.

  1. Desconnecteu l'alimentació del ventilador a l'interruptor automàtic.
  2. Carefully remove the old G9 bulb from its socket.
  3. Insert the new G9 bulb firmly into the socket.
  4. Restaura l'alimentació i prova la llum.

Resolució de problemes

If you experience issues with your Novo Ceiling Fan, refer to the following common troubleshooting steps:

ProblemaCausa possibleSolució
El ventilador no funciona.No power; loose wiring; remote control issues.Check circuit breaker. Verify all wire connections. Replace remote batteries. Ensure remote receiver is properly installed.
La llum no s’encén.Burned out bulb; loose wiring; light switch off.Replace G9 bulb. Check light kit wiring. Ensure light function on remote is activated.
El ventilador es trontolla.Fulles soltes; fulles desequilibrades; muntatge incorrecte.Ensure all blade screws are tight. Use a balancing kit (not included) if necessary. Verify mounting bracket is secure.
El comandament a distància no funciona.Piles gastades; comandament a distància no emparellat.Replace batteries. Refer to remote pairing instructions (if applicable, usually in a separate remote manual).

Especificacions

CaracterísticaDetall
Número de modelAC18250-WH
MarcaIl·luminació Kendal
AcabarBlanc
Fan Blade ColorBlanc
Nombre de fulles4
Envergadura de la fulla50 polzades
Pas de la fulla14 graus
Kit de llumIntegrated 3-tier light kit
Tipus de bombeta(1) 75w T4 G9 120v Halogen (bulb included with 1 extra)
Mida del motor153 x 22 mm
Tipus de controlComandament a distància amb funció completa
Voltage120 Volts

Informació de la garantia

Kendal Lighting products are manufactured to high-quality standards. This product is covered by the manufacturer's limited warranty. Please refer to the warranty card included with your purchase or visit the official Kendal Lighting weblloc web per obtenir informació detallada sobre els termes i condicions de la garantia. Conserveu el comprovant de compra per a reclamacions de garantia.

Atenció al client

For technical assistance, replacement parts, or any questions regarding your Kendal Lighting AC18250-WH The Novo Ceiling Fan, please contact Kendal Lighting customer support. Contact information can typically be found on the manufacturer's weblloc o en els materials d'embalatge.

Note: Always ensure power is disconnected before performing any maintenance or troubleshooting steps.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.